aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: be consistent with kernel config file namesLuka Perkov2014-06-171-0/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41240 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: DGN3500 (all known variants) factory and sysupgrade image building ↵John Crispin2014-06-171-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | support This patch adds factory image building for the DGN3500, all variants, and fixes sysupgrade images to make them play nice with the sercomm secondary boot loader. The factory images can be used directly in the update dialog in the interface of the stock firmware and via the special Sercomm bootmode and a special windows flashing utility (allegedly present in the CD that came with the device -- but it's also compatible with the NSLU2 Upgrade_207_XP utility.) The special bootmode can be activated by turning the device on while holding the reset button pressed, then releasing it when the power led starts blinking red and green. Please notice that if using the 207 utility, it will always report that the flashing failed even though it completed successfully. Just power cycle the router manually after the utility reports the failure and OpenWRT will boot. This same utility (despite reporting failure in this case too) can revert a DGN3500 (any variant) to the appropriate stock Netgear firmware. This patch is a heavily modified version of a package I found on the OpenWRT forum with a couple fixes and features added -- mainly the generation of all the different image variants to support all known models directly, atm known variants are AnnexA-WW, AnnexA-NA and AnnexB-DE/GR. I tested the patch successfully on my device. Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41236 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mvebu]: add dummy fixup for 3.10Imre Kaloz2014-06-171-0/+21
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* build images for the WRT1900ACImre Kaloz2014-06-171-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41233 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mvebu]: preliminary support for the WRT1900AC (work in progress)Imre Kaloz2014-06-1714-0/+1841
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41232 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: fix typo in TP-Link WDR4900 profileJo-Philipp Wich2014-06-171-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41229 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: RT-N56U support fixes and factory image creationJohn Crispin2014-06-164-3/+58
| | | | | | Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41224 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: various cleanups to /lib/upgrade/nand.shJohn Crispin2014-06-161-6/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41222 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/3.1{0, 2, 3, 4}: mtd: m25p80: add support for EON EN25QH128John Crispin2014-06-164-0/+80
| | | | | | | | This flash is used in newer Ubnt UniFi AP Pro Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41219 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: replace a ubifs patch by upstream commitJohn Crispin2014-06-162-241/+158
| | | | | | | | | | A modified version of 552-ubifs-respect-silent-mount-flag.patch has been merged upstream. Replace the patch in OpenWrt with the version which has been merged. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41218 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fixes XDXRN502J reset buttonJohn Crispin2014-06-161-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41217 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add vlan configuration for asiarf awm002-evbJohn Crispin2014-06-161-0/+1
| | | | | | | | | Without this, the ports all end up on vlan 1. This enables a separate WAN port that works. Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41216 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: restore AWM002-EVB profile in asiarf.mkJohn Crispin2014-06-161-2/+13
| | | | | | | | | | | | In a recent revision (r41177) John Crispin removed the profile for the AsiaRF AWM002 eval board while adding another AsiaRF board. This patch restores AWM002 and also corrects a misspelling and an apparently errant reference to an Allnet ALL0239-3G device. Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41215 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition ↵John Crispin2014-06-161-5/+2
| | | | | | | | | | | | | | and rootfs type This patches the BTHOMEHUB2B device tree to make use of the new code for automatic detection of the ubi partition and the rootfs type within it. Gets rid of the ugly alternative bootargs lines. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41214 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fixup vgv7519 usb supportJohn Crispin2014-06-161-1/+1
| | | | | | | | https://dev.openwrt.org/ticket/16800 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41213 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix pkt_type filter mask for packet socketsFelix Fietkau2014-06-138-8/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41178 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add asiarf awapn2403 supportJohn Crispin2014-06-139-8/+104
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41177 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Update UML target to 3.10 and various improvementsSteven Barth2014-06-127-45/+382
| | | | | | | | | | | Updated target to 3.10.36. Added mconsole exec patch. Added pseudo-random MAC patch (from NetKit). Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi> Reviewed-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41172 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.14 to 3.14.7Luka Perkov2014-06-1120-130/+37
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41150 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix rt2x00 handling of default packages for subtargetsFelix Fietkau2014-06-117-3/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41145 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: make sure the new UBIBLOCK symbol does not break buildsJohn Crispin2014-06-1111-0/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41134 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: activate the nand sutargetJohn Crispin2014-06-111-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41133 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix up kernel config for the nand subtargetJohn Crispin2014-06-111-2/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41132 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for wndr4300John Crispin2014-06-112-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove the explicit ubi.mtd- paramaters and rename ubiroot to ubiJohn Crispin2014-06-111-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a NAND_SUPPORT symbolJohn Crispin2014-06-118-7/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41122 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport the ubiblock patches from 3.14->3.10John Crispin2014-06-1113-0/+1754
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41120 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: rootfs auto-mount on ubiJohn Crispin2014-06-115-0/+418
| | | | | | | | | | | | | | | | | | | | | | | | | | Similar to the rootfs hacks on NOR flash devices, this series introduces support for auto-attaching (ubi device), auto-creating (ubiblock device) and mounting the "rootfs" (ubifs or squashfs) volume. This is needed so OpenWrt can start without relying on the bootloader to pass the ubi.mtd, ubi.block, rootfs and rootfstype parameters, but instead auto-detect the root filesystem according to a simple convention. OpenWrt-specific: 490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch 491-ubi-auto-create-ubiblock-device-for-rootfs.patch 492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch 493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch sent upstream: 552-ubifs-respect-silent-mount-flag.patch http://lists.infradead.org/pipermail/linux-mtd/2014-May/053893.html v2: actually retry with MS_RDONLY when mounting read-only ubifs root Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41119 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport ubiblock support from 3.15John Crispin2014-06-118-0/+1336
| | | | | | | | | | | | | | | | | | Backport ubiblock support from kernel 3.15 as well as all follow-up fixes related to ubiblock. Signed-off-by: Daniel Golle <daniel@makrotopia.org> create mode 100644 target/linux/generic/patches-3.14/040-UBI-R-O-block-driver-on-top-of-UBI-volumes.patch create mode 100644 target/linux/generic/patches-3.14/041-UBI-block-do-not-use-term-attach.patch create mode 100644 target/linux/generic/patches-3.14/042-UBI-block-Mark-init-only-symbol-as-__initdata.patch create mode 100644 target/linux/generic/patches-3.14/043-UBI-block-Use-u64-for-the-64-bit-dividend.patch create mode 100644 target/linux/generic/patches-3.14/044-UBI-rename-block-device-ioctls.patch create mode 100644 target/linux/generic/patches-3.14/045-UBI-block-Remove-__initdata-from-ubiblock_param_ops.patch create mode 100644 target/linux/generic/patches-3.14/046-UBI-avoid-workqueue-format-string-leak.patch create mode 100644 target/linux/generic/patches-3.14/047-UBI-make-UBI_IOCVOLCRBLK-take-a-parameter-for-future.patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41118 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: fix too short msleepFelix Fietkau2014-06-101-2/+2
| | | | | | | | | | | | Use msleep(20) instead of msleep(10) to make code closer to reality since msleep can sleep for up to 20ms even we request shorter delay. All updated calls are located in PCI initialization routine which is called only once upon device boot. So there should be no performance issues caused by more longer delay. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41096 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: shorten linesFelix Fietkau2014-06-1010-262/+318
| | | | | | | | Wrap lines over 80 chars or make them shorter by other ways. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41095 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: constify some static structuresFelix Fietkau2014-06-103-4/+6
| | | | | | | | Constify some static structures as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: avoid __FUNCTION__ usageFelix Fietkau2014-06-101-6/+6
| | | | | | | | | Use __func__ instead of gcc specific __FUNCTION__ as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41093 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: trailing statements fixesFelix Fietkau2014-06-104-9/+14
| | | | | | | | | Move trailing statements to next line with indentation as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41092 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: spaces fixesFelix Fietkau2014-06-109-63/+66
| | | | | | | | Add missed spaces and remove odd space as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41091 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: indent fixesFelix Fietkau2014-06-105-145/+146
| | | | | | | | | Various indent fixes suggested by checkpatch: use tabs, use same level of indentation for switch and case, correct indentation levels. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41090 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: fix includesFelix Fietkau2014-06-107-29/+20
| | | | | | | | | Remove some unnecessary includes and use <linux/foo.h> instead of <asm/foo.h> when it possible as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41089 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: various printk(...) fixesFelix Fietkau2014-06-103-30/+33
| | | | | | | | | Use more particular functions dev_<level> or pr_<level>(...) insead of direct printk(...) call. Add KERN_LEVEL to calls what missed it. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41088 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: various braces fixesFelix Fietkau2014-06-107-42/+32
| | | | | | | | | Fix braces location, remove unnecessary empty lines before or after code block, remove useless braces. All cases are detected by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41087 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: do not initialize statics to 0 or falseFelix Fietkau2014-06-103-4/+4
| | | | | | | | as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41086 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: remove trailing whitespaceFelix Fietkau2014-06-101-1/+1
| | | | | | | | as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41085 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: do not assignment in if conditionFelix Fietkau2014-06-105-10/+13
| | | | | | | | Remove assignments from if conditions as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41084 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: remove parentheses around return valuesFelix Fietkau2014-06-103-8/+8
| | | | | | | | | Remove parentheses around return values since return is no a function, as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41083 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: parenthesis around complex macroses valueFelix Fietkau2014-06-102-31/+31
| | | | | | | | | Use parenthesis around complex macroses value as suggested by checkpatch. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: various comments fixesFelix Fietkau2014-06-104-97/+74
| | | | | | | | | | Fix comment issues detected by checkpatch. Convert C99 // comments to ordinary /* ... */ comments. Correct block comments style or convert them to single line comments. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41081 3c298f89-4303-0410-b956-a3cf2f4a3e73
* atheros: avoid CamelCaseFelix Fietkau2014-06-103-62/+63
| | | | | | | | | | Change fooBar variables names to foo_bar as suggested by checkpatch, write few tables names in lower case and correctly place __initdata keyword. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41080 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: merge FEATURES lines in the legacy subtargetFelix Fietkau2014-06-081-2/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41053 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix kmod-usb-brcm47xx build on legacy and mips74k subtargetsFelix Fietkau2014-06-081-3/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41052 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: activate some compiler optimizations for 74K CPUsHauke Mehrtens2014-06-074-1/+6
| | | | | | | | | | | | With this patch the mips74k subtarget will be compiled with optimized compiler options to generated smaller and faster code. This currently breaks broadcom-wl, because the binary blob is only compiled with mipsr1 support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41050 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: move the low_mem feature flag to the legacy subtargetFelix Fietkau2014-06-072-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41049 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 22:38:15 +0000