aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: init usb power for Lenovo Y1SJohn Crispin2015-11-211-0/+21
| | | | | | Signed-off-by: Shonn Lu <countrysideboy@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47557 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the SingleProfile kernel size limit for dLAN devicesJohn Crispin2015-11-211-2/+2
| | | | | | | | it ends up as $(2) of CatFiles and must be a plain decimal value. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-2110-6/+162
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703NJohn Crispin2015-11-211-1/+1
| | | | | | | | | The hwid check was wrong, causing the AR71XX_MODEL value to end with a space (as $hwver was unset). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: add missing platform bindings for stmmac glueJohn Crispin2015-11-211-0/+19
| | | | | | | | | | | r47218 was missing needed changes which were accidentally ommitted from the patch. This should fix #20878 Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionHauke Mehrtens2015-11-211-0/+1
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix PCIe reset gpio handling - the core already handles the ↵Felix Fietkau2015-11-212-16/+60
| | | | | | | | active-low flag Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: assert AHB PCIe reset during initFelix Fietkau2015-11-212-14/+36
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: reduce PCIe buffer size setting to fix potential data corruption issuesFelix Fietkau2015-11-212-4/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix pcie reset gpio definions and move them to the common .dtsi fileFelix Fietkau2015-11-2122-266/+170
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix pcie tx0-term-offset settingFelix Fietkau2015-11-2110-12/+16
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsetsFelix Fietkau2015-11-212-12/+12
| | | | | | | | Fixes QCA99x0 detection issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-202-9/+9
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: migrate network setup to board detection frameworkJo-Philipp Wich2015-11-201-7/+5
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again)Jo-Philipp Wich2015-11-201-5/+6
| | | | | | | | | | | | | | When fixing the model string for WNDR3700v2 which contain a model string followed by 0xff in r46455, the match for other versions of the WNDR3700v2 which just contain lots of 0xff broke (as the 0xff $model is checked for is stripped off). Fix by stripping off non-printable characters only for the actual output string, but not for the internal matching. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionHauke Mehrtens2015-11-203-0/+3
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-202-10/+11
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: ventana: remove invalid video options from bootscriptLuka Perkov2015-11-201-75/+1
| | | | | | | | | Removed video related kernel params that are only appropriate for the Freescale downstream vendor kernel and not appriate for mainline linux. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: refresh patchesLuka Perkov2015-11-197-44/+9
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: remove obsolete VENTANA_DTS from profileLuka Perkov2015-11-181-15/+0
| | | | | | | | The device-tree files are now specified in the image Makefile Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47512 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add Vetnana LVDS supportLuka Perkov2015-11-183-0/+150
| | | | | | | | These patches have been submitted to upstream Linux and are pending acceptance. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: ventana: fix GW16083 device-tree patchLuka Perkov2015-11-181-16/+16
| | | | | | | | | | The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in the conversion from 3.18 to 4.1. This patch resolves that and puts the device-tree nodes in the correct place. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47510 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: drop support for kernel 3.18Luka Perkov2015-11-1810-1384/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: convert ventana images to squashfs+ubifs overlayLuka Perkov2015-11-183-111/+285
| | | | | | | | | | | | | | | | | | | | | | Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: kernel: add UBI_BLOCK supportLuka Perkov2015-11-181-1/+1
| | | | | | | | UBI_BLOCK support is needed for mounting squashfs over UBI Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: switch to v4.1Luka Perkov2015-11-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add Gateworks GW551x supportLuka Perkov2015-11-183-0/+507
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: nsa310s: fix partition sizeLuka Perkov2015-11-182-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add CONFIG_SSB_HOST_SOC symbolRafał Miłecki2015-11-163-0/+3
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport BCM47xx MIPS commits from 4.3 and 4.4-rc1Rafał Miłecki2015-11-169-8/+405
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport ssb changes from 4.4-rc1Rafał Miłecki2015-11-162-0/+1372
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: remove 3.18 supportFelix Fietkau2015-11-158-2128/+0
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47474 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: switch to 4.3Felix Fietkau2015-11-151-1/+1
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: add support for 4.3Felix Fietkau2015-11-155-0/+2014
| | | | | | | | Runtime tested on Ubiquiti EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add patch to fix prefsrc lookupsFelix Fietkau2015-11-151-0/+60
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: enable vfpv4 support and set cpu type to cortex-a9Felix Fietkau2015-11-141-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47468 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: take bcm47xx_nvram.h from kernel and not backportsHauke Mehrtens2015-11-138-103/+96
| | | | | | | | | | | | | | | | | | | compat-wireless/backports now contains a bcm47xx_nvram.h file to backport some of the functions in it which are used by the bcmfmac driver. This file just checks for the kernel versions and provide an empty implementations on older kernel versions. This is OK on most systems, but on bcm47xx / bcm53xx systems we want to call the real functions here. This commit removes the file from backports in our build process like we do it with the bcma and ssb header files. Instead we add a recent version into our kernel so all code uses only one header file. On bcm47xx / bcm53xx the real implementations of this code will be used. Reported-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47467 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix an af_packet regression that was breaking PPPoE on 4.1+ (#20707)Felix Fietkau2015-11-112-0/+34
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47459 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add Linksys routers to default profileLuka Perkov2015-11-112-3/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionsHauke Mehrtens2015-11-103-0/+3
| | | | | | | | | This was seen by the buildbot on arm64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Arduino YunHauke Mehrtens2015-11-109-1/+217
| | | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: serial: core: add support for boot console with arbitrary baud ratesHauke Mehrtens2015-11-101-0/+76
| | | | | | | | | | | | | | The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 230400 Baud. With this patch Linux will use the configured baud rate and not some standard one which is near by. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add function to access the GPIO function2 registerHauke Mehrtens2015-11-101-0/+72
| | | | | | | | | | | Add access to the function2 gpio register. This probably has to be converted into a pimux driver later on. This is needed for some setup functions on the Arduino Yun. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47449 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix breakage in the 4.3 version of ↵Felix Fietkau2015-11-101-3/+6
| | | | | | | | 611-netfilter_match_bypass_default_table.patch Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47447 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: rename EA3500/EA4500 profilesLuka Perkov2015-11-102-11/+11
| | | | | | | | Match the engineering board names now used elsewhere. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47436 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add diag LED on Linksys EA3500Luka Perkov2015-11-101-0/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47435 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support sysupgrade on Linksys EA[34]500Luka Perkov2015-11-102-0/+111
| | | | | | | | | | This automatically writes to the alternate firmware partition (on Linksys's dual firmware layout) using code borrowed from the WRT1900AC port. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+20
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47433 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: generate factory images for Linksys EA[34]500Luka Perkov2015-11-102-12/+39
| | | | | | | | | This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: find active Linksys root partitionLuka Perkov2015-11-104-0/+124
| | | | | | | | | | | This is imported verbatim from the mvebu WRT1900AC port. It picks up the current boot partition from the kernel command line, then renames that partition "ubi" so that it auto-mounts. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47431 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 22:05:10 +0000