aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add missing config symbolFelix Fietkau2016-06-201-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix TP-LINK Archer-C5/C7 v2 rfkillJohn Crispin2016-06-201-1/+1
| | | | | | Fix ARCHER_C7_GPIO_BTN_RFKILL, which is attached to GPIO23 Signed-off-by: Lars Buerding <lb.wrt@metatux.net>
* arc: Build uImage as well as vmlinux output filesAlexey Brodkin2016-06-202-16/+72
| | | | | | | | | | | | | | | | | | | | | | Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* target: socfpga: Add support for QSPI NOR bootMarek Vasut2016-06-2034-16/+4760
| | | | | | | Add necessary kernel backports to support the Cadence QSPI controller present on the Altera SoCFPGA SoC. Signed-off-by: Marek Vasut <marex@denx.de>
* kernel: update kernel 4.4 to version 4.4.10Álvaro Fernández Rojas2016-06-203-34/+8
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.9Álvaro Fernández Rojas2016-06-20107-920/+246
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.8Álvaro Fernández Rojas2016-06-2013-234/+35
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: update to latest versionÁlvaro Fernández Rojas2016-06-20241-839/+13437
| | | | | | | As usual these patches were extracted from the raspberry pi repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: fix replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-19140-220/+220
| | | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49379 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: drop Copyright header from two of my bash scriptsRafał Miłecki2016-06-192-5/+0
| | | | | | | | | | | | | | | Both scripts modified by this patch were added by me. First of all I incorrectly added OpenWrt as Copyright holder. It was wrong because: 1) I simply can't transfer my moral rights according to the Polish law 2) Transfering copyrights (economic rights) requires an agreement which I didn't sign with OpenWrt(.org). Other than that I don't find these trivial scripts important enough to put info about *my* copyrights in a header so this patch just drops them completely. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.3 configLuka Perkov2016-06-191-4942/+0
| | | | | | | | When linux 4.3 support was removed the config was left. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49374 3c298f89-4303-0410-b956-a3cf2f4a3e73
* krikwood: Make Iconnect image use new ubi format styleLuka Perkov2016-06-192-6/+11
| | | | | | | | | To flash first time follow instructions in commit: "kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images" Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49370 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: Migrate Iconnect to new ubi image formatLuka Perkov2016-06-191-1/+1
| | | | | | | | Default partition name is now ubi. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49369 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: socfpga: Add Altera SoCFPGA supportLuka Perkov2016-06-1923-0/+1578
| | | | | | | | | This patch adds support for the Altera SoCFPGA target. Both generic target and Terasic SoCkit boards are supported. Signed-off-by: Marek Vasut <marex@denx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49367 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix DTB generationLuka Perkov2016-06-191-1/+1
| | | | | | | | using preprocessor style includes when calling dtc directly. Signed-off-by: John Crispin <john@phrozen.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49360 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Change all '/include/' clauses to '#include' so preprocessing can be ↵Luka Perkov2016-06-19175-176/+176
| | | | | | | | done properly for the entire device trees. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49357 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add hex prefix (0x) to dtsi reg properties where needed.Luka Perkov2016-06-199-29/+29
| | | | | | Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: introduce serial0 aliasesLuka Perkov2016-06-1910-10/+32
| | | | | | | | | This patch introduces serial0 aliases in the ramips DTS files, which can then be used to denote the active console instead of relying on bootargs. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: fix wgt634u port assignment, broken since openwrt r47866Luka Perkov2016-06-191-1/+1
| | | | | | Signed-off-by: Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7620: [UPSTREAM] fix USB frequency scalingLuka Perkov2016-06-191-0/+33
| | | | | | | | | The logic for the SoC check got inverted. We need to check if it's not a MT76x8. Signed-off-by: D. Andrei Măceș <dmaces@nd.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49352 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix alphabetical sorting for 02_networkLuka Perkov2016-06-191-11/+11
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49351 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Don't use a VLAN for the single ethernet port of the A5-V11.Luka Perkov2016-06-191-5/+2
| | | | | | | | | | | | This router only has one ethernet port, so a VLAN is useless here, now that the rt3050 TCP bug that happened without VLANs has been fixed for a very long time. Add this router to the VLAN-less config that is used by other single-port routers. Also fix MAC address detection code since this router has no WAN port. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix network for routers without VLANs on eth0.Luka Perkov2016-06-191-6/+2
| | | | | | | | | | | | | | | | Some routers only have one port, so eth0 is used without VLANs for them. Revision r47720 introduced some changes, but wrongly confused "enable" with "reset". VLANs need to be disabled for those routers, and the switch may be reset. Fix this, by explicitly disabling VLANs instead of resetting the switch for these routers. Also merge duplicate configuration for the "m2m". Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add workaround to rebuild vdso-o32.so.dbgLuka Perkov2016-06-191-2/+13
| | | | | | | | | | | | | | | | Building for octeon fails with 'arch/mips/vdso/vdso-o32.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Use the same workaround as the one for vdso.so.dbg committed in 9eb155353a5f5137ec85a5b5b0287af63c544710. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add a workaround to rebuild vdso.so.dbg after genvdsoLuka Perkov2016-06-191-0/+11
| | | | | | | | | | | | | | | Currently the build fails with 'arch/mips/vdso/vdso.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Add a makefile rule to force the rebuild of vdso.so.dbg if genvdso has has been changed to workaround the failure. Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49334 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix xway image buildingLuka Perkov2016-06-191-3/+3
| | | | | | | | | | | | | | | | | | | | | Commit 8c130dd (lantiq: use new image build process for some images) broke image generation for the xway target since the generated macros reference not existing WBMRA.dts and WBMRB.dts files leading to the following build error: mips-openwrt-linux-musl-cpp: error: ../dts/WBMRA.dts: No such file or directory mips-openwrt-linux-musl-cpp: warning: '-x assembler-with-cpp' after last input file has no effect mips-openwrt-linux-musl-cpp: fatal error: no input files Previously both the WBMRA and WBMRB profiles shared a common WBMR DT since the only difference is the embedded firmware kmod package. Extend the lantiqImage macro to optionally support specifying a different DTS file and use this facility to let the both WBMR profiles reference the correct device tree file. Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49330 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: remove old references to kmod-acpi-buttonLuka Perkov2016-06-192-2/+2
| | | | | | | | | | | The kmod-acpi-button functionality is included in the kernel where needed and the corresponding kmod package has been deleted long ago, therfor drop the remaining references now. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49329 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix ip6_tunnel compilationLuka Perkov2016-06-191-2/+2
| | | | | | | | Replace undefined iph for ip_hdr(skb) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* image / basefiles: make console password configurableluka2016-06-1918-39/+39
| | | | | | | Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> Signed-off-by: John Crispin <john@phrozen.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49325 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: search PARTUUID in any block deviceLuka Perkov2016-06-191-1/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49319 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: make sysupgrade work without partxLuka Perkov2016-06-191-6/+28
| | | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49318 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.1 to version 4.1.23Rafał Miłecki2016-06-197-13/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49296 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Drop hacky switch workaround for failsafe on rt3x5x and rt5350.John Crispin2016-06-191-28/+9
| | | | | | | | | | | | The new rt3050 switch driver doesn't have problems with TCP when not using VLANs. This piece of code also broke failsafe for all routers where the LAN port is not wired to port 0 of the internal switch. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 0 on A5-V11.John Crispin2016-06-191-1/+2
| | | | | | | | | Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 4 on HT-TM02.John Crispin2016-06-191-0/+1
| | | | | | | | | Port 4 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Get rt3050 ethernet ports to be disabled from the device tree.John Crispin2016-06-191-0/+81
| | | | | | | | | | | | | | | This patch allows configuring ports to be disabled in the device tree; this saves power, since disabling ports here actually disables power to ethernet PHYs. Line 444 enables all ethernet ports, so line 487 is getting zero ports to be disabled, except for port 5 in SoCs where this is not implemented as it will be sticky disabled in register POC0. Because of this, the code will still read the switch configuration and OR it to the device tree setting. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49290 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix comment in rt3050 ethernet switch driver.John Crispin2016-06-191-0/+24
| | | | | | | | | | | | Line 444 is actually enabling all switch ports by setting the disable bits to 0. This needs to be done because the bootloader sets all ports to disabled by default (which is the case for at least one router based on RT5350). So, this patch fixes the comment in line 443. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49289 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix documentation for the rt3050 switch driver.John Crispin2016-06-191-0/+23
| | | | | | | | The prefix used in the driver is now "mediatek" instead of "ralink". Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49288 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix multicast ICMPv6 for the rt3050 ethernet switch.John Crispin2016-06-191-0/+26
| | | | | | | | | | | | | | | | | | The FCT2 esw register should be set to 0x2500C to have "unknown IPv6 multicast" packets broadcasted to every port, instead of dropped. The previous value only let those packets go through ports 1 and 3. "Unknown IPv6 multicast" packets include packets needed by ICMPv6 echo requests addressed to well-known addresses, such as ff02::1 (MAC address is 33:33:00:00:00:01 in this case). Please note that by default ICMPv6 echo requests to ff02::1 are not replied to by the router because of ip6tables considering those packets to be invalid. But this is another bug/patch. ;) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49287 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-Link TL-WR810N supportJohn Crispin2016-06-1912-0/+174
| | | | | | | | | This patch adds support for the TP-Link TL-WR810N. https://wiki.openwrt.org/toh/tp-link/tl-wr810n Signed-off-by: Jens Steinhauser <jens.steinhauser@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VGV7510KW22BRN - set the phy clock sourceJohn Crispin2016-06-191-0/+6
| | | | | | | | | | | | | VGV7510KW2 with VRX288 v1.2 has brnboot 1.8 installed. Starting with this brnboot version, the "GPHY Clock Source" isn't set anymore by brnboot, with the result that xrx200-net fails to probe/initialize the phys. Use the phy clock source device tree binding to specify the clock source. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add device tree binding for the phy clock sourceJohn Crispin2016-06-191-0/+30
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VGV7510KW22BRN - support dual-imageJohn Crispin2016-06-191-1/+4
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: handle the dual-firmware layout of brnbootJohn Crispin2016-06-191-0/+93
| | | | | | | | | | | | | | | | | brnboot based devices can have two Image partitions. When flashing images via the brnboot recovery web interface, the Image partitions are written alternating. The current active Image partition is stored in the first byte of the Primary_Setting partition by using 0x00 for Code_Image_0 and 0x01 for Code_Image_1. By using the information about the active "Code Image", it is possible to ensure that the rootfs belongs to the current booted Image/Kernel. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: move partitions into partion table nodeJohn Crispin2016-06-1942-1006/+1253
| | | | | | | | | | Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49280 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use sysupgrade.bin postfix for tplink imagesJohn Crispin2016-06-191-3/+4
| | | | | | | | | | | | Use the same name for TP-Link images as it was with the old image build code. Move the BOARD_ID export to the TP-Link image build recipe, to indicate that the variable is only related in this context. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VG3503J - use the same PHY led functionality as the OEM firmwareJohn Crispin2016-06-191-8/+8
| | | | | | | | | | | | | Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki article, the OEM Firmware uses the following PHY led functionality: gphy led 0: LINK/ACTIVITY gphy led 1: LINK gphy led 2: ACTIVITY Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49278 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix eth0 support for Ubiquiti UniFi AP ACJohn Crispin2016-06-191-0/+1
| | | | | | | Fix eth0 support for the Ubiquiti UniFi AP AC Signed-off-by: Paul Wassi <p.wassi at gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49277 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use the same functionality for all ethernet phys ledJohn Crispin2016-06-192-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VGV7510KW22 has the leds for LAN1-3 connected to pin1 of the phys and the led for LAN4 connect to pin0 of the phy. This results with the current configuration in a fast flashing LAN4 led as soon as a network cable is connected. Something similar was reported on the forum[1] for the VGV7519 as well. Since it isn't predicable to which pin a (single) phy led is connected, use the (default) pin1 functionality Constant On: 10/100/1000MBit Blink Fast: None Blink Slow: None Pulse: TX/RX for all ethernet phy leds. After checking pictures of all vr9 boards, it looks like only the VG3503J has more than one led connected per phy. Using the phy led device tree bindings to assign the functionality to the "additional" leds, the VG3503J phy leds should behave as before. Signed-off-by: Mathias Kresin <openwrt@kresin.me> [1] https://forum.openwrt.org/viewtopic.php?pid=321523 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49270 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix minor typos in 11G/22F phy driverJohn Crispin2016-06-191-2/+2
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49269 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:01:20 +0000