aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood: add Linksys routers to default profileLuka Perkov2015-11-112-3/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionsHauke Mehrtens2015-11-103-0/+3
| | | | | | | | | This was seen by the buildbot on arm64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47452 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Arduino YunHauke Mehrtens2015-11-109-1/+217
| | | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: serial: core: add support for boot console with arbitrary baud ratesHauke Mehrtens2015-11-101-0/+76
| | | | | | | | | | | | | | The Arduino Yun uses a baud rate of 250000 by default. The serial is going over the Atmel ATmega and is used to connect to this chip. Without this patch Linux wants to switch the console to 230400 Baud. With this patch Linux will use the configured baud rate and not some standard one which is near by. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add function to access the GPIO function2 registerHauke Mehrtens2015-11-101-0/+72
| | | | | | | | | | | Add access to the function2 gpio register. This probably has to be converted into a pimux driver later on. This is needed for some setup functions on the Arduino Yun. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47449 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix breakage in the 4.3 version of ↵Felix Fietkau2015-11-101-3/+6
| | | | | | | | 611-netfilter_match_bypass_default_table.patch Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47447 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: rename EA3500/EA4500 profilesLuka Perkov2015-11-102-11/+11
| | | | | | | | Match the engineering board names now used elsewhere. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47436 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add diag LED on Linksys EA3500Luka Perkov2015-11-101-0/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47435 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support sysupgrade on Linksys EA[34]500Luka Perkov2015-11-102-0/+111
| | | | | | | | | | This automatically writes to the alternate firmware partition (on Linksys's dual firmware layout) using code borrowed from the WRT1900AC port. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47434 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+20
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47433 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: generate factory images for Linksys EA[34]500Luka Perkov2015-11-102-12/+39
| | | | | | | | | This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: find active Linksys root partitionLuka Perkov2015-11-104-0/+124
| | | | | | | | | | | This is imported verbatim from the mvebu WRT1900AC port. It picks up the current boot partition from the kernel command line, then renames that partition "ubi" so that it auto-mounts. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47431 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: consistently use engineering board namesLuka Perkov2015-11-104-12/+12
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47430 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: rework Linksys EA[34]500 DTSLuka Perkov2015-11-106-94/+172
| | | | | | | | | | | | | | | - Use board engineering names rather than marketing names - Linksys uses a dual firmware layout, where the bootloader will switch to the other stored image when one fails to boot three consecutive times. In order to make this firmware compatible with the factory images and the stock bootloader we must match this layout. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47429 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: enable squashfs-on-ubiblock supportLuka Perkov2015-11-103-3/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47428 3c298f89-4303-0410-b956-a3cf2f4a3e73
* x86: add generic profiles to x86_64, kvm_guest and xen_domuFelix Fietkau2015-11-083-0/+45
| | | | | | | | The imagebuilder requires a profile for every subtarget to work. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47421 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)Felix Fietkau2015-11-0810-80/+265
| | | | | | | | | | | | | | | The international version is completely different from the already supported Chinese version. The WLAN of the QCA956x SoC used by this router has been fixed in r46948. This patch looks like it changes a lot in 700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately, quilt decided to completely reorganize the Kconfig patch even though only a single section has been added. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47420 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix typo in r47416Felix Fietkau2015-11-071-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47417 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix alignment of struct arpt_arp (fixes #14577)Felix Fietkau2015-11-071-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47416 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.0 supportFelix Fietkau2015-11-07211-33364/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47412 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: minor fixes for mt7621 profilesFelix Fietkau2015-11-072-4/+2
| | | | | | | | | * remove references to non-existing kmod-usb3-mt7621 * ZTB WG2626 doesn't have an RTC (thanks to Piotr Dymacz!) Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47407 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-LINK TL-WR1043ND v3Felix Fietkau2015-11-071-1/+8
| | | | | | | | | The hardware of the v3 is identical to the v2. Based-on-patch-by: Andreas Ziegler <github@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47406 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for ZyXEL NBG6616.Felix Fietkau2015-11-0710-26/+194
| | | | | | Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* include/image.mk: Introduce generic option to wrap kernel into JFFS2Felix Fietkau2015-11-071-16/+3
| | | | | | | | | Some devices require the kernel to be in a JFFS2 file system. Make the support for this more generic so that it can be used by other devices. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47404 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix previous commitJohn Crispin2015-11-052-22/+66
| | | | | | | | r47388 accidentially changed 2 files too many Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47389 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: minor tweak to the lks7688 baord nameJohn Crispin2015-11-054-68/+24
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47388 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add support for 4.3Luka Perkov2015-11-049-0/+1238
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47386 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: pogo_e02: use mainline led definitionsLuka Perkov2015-11-042-4/+4
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47385 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.3-rc7 to version 4.3Luka Perkov2015-11-0418-36/+42
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47384 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix BOARD_NAME spellingsJonas Gorski2015-11-041-4/+6
| | | | | | | | | | | | | | the board names used by the upgrade check differ from the device names in case, so always set them. We can't rely on tolower or similar since different locales might have different rules for lower case letters, so set them explicitily. Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference. Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47381 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix brcm, bcm6345-ext-intc interrupt controllerJonas Gorski2015-11-042-6/+8
| | | | | | | | | brcm,field-width is read but unused Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47379 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix Netgear CVG834G HCS magic bytesJonas Gorski2015-11-041-1/+1
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47378 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: lzma-loader: add BCM3380 supportJonas Gorski2015-11-041-0/+5
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: lzma-loader: add BCM3368 supportJonas Gorski2015-11-041-1/+4
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47376 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm63xx: fix BCM3368 external interruptsJonas Gorski2015-11-041-1/+1
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47375 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add feature to blink led on sysupgradeJohn Crispin2015-11-032-1/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47373 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use correct PLL configuration register bitmask for QCA956x SoC.Felix Fietkau2015-11-021-2/+2
| | | | | | | | | Incorrect value causes clock inaccuracy as huge as 1/60. Signed-off-by: Dmitry Ivanov <dima@ubnt.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47363 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mediatek: add support for the new MT7623 Arm SoCJohn Crispin2015-11-0284-0/+50668
| | | | | | | | | the support is still WIP. next steps are to make the pmic and ethernet work. this is the first commit to make sure nothing gets lost. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47354 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for ZBT WG2626John Crispin2015-11-027-3/+161
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47351 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add eeprom mtd partition to the Asus RP-N53 dtsJohn Crispin2015-11-021-0/+4
| | | | | | | | This patch adds the eeprom property to the dts for the Asus RP-N53. It is necessary to get the wifi in the soc working. Signed-off-by: Alberto Mattea <alberto@mattea.info> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: preinit: use iproute2 instead of vconfigJohn Crispin2015-11-021-2/+2
| | | | | | | | | | | | | | | Replace use of vconfig with the corresponding iproute2 syntax in /lib/preinit/07_set_preinit_iface_ramips The switch reset work-around needed on some ramips targets used the deprecated vconfig tool to bring up the pre-init/failsafe interface. This doesn't work on recent builds where vconfig is no longer being deployed, resulting in the device being unreachable when triggered into failsafe mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Dovado tiny ACJohn Crispin2015-11-028-0/+202
| | | | | | | | | | | | | | | | Add support for Dovado tiny AC wifi router. Soc: mt7620a ram: 64MB flash: 8MB 1x usb 2.0 two gigabit lan ports 5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add function to change rt2x00 wifi eeprom macJohn Crispin2015-11-021-0/+12
| | | | | | | | | Some boards like dovado tiny ac have generic ralink mac in onflash wifi eeprom. Add eeprom_set_macaddr function to rt2x00 eeprom extract script which changes mac addr insde eeprom dump. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47347 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7620 add icplus phy driver kernel config symbolJohn Crispin2015-11-021-0/+1
| | | | | | | | | Add missing icplus phy driver kernel config symbol to mt7620 subtarget. This is needed since some mt7620 devices have icplus ip1001 ethernet transceiver Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for the Asus RP-N53 in the "02_network" boot scriptJohn Crispin2015-11-021-1/+2
| | | | | | | | This patch adds a case for the Asus RP-N53 in the "02_network" boot script. Without this, the lan interface does not get configured on startup, effectively bricking the device. Signed-off-by: Alberto Mattea <alberto@mattea.info> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for wdr7500v3John Crispin2015-11-021-1/+8
| | | | | | | | | | The device is similar to Archer C7 v2, but with 8M of flash, and 6 external antennas. Reason for breaking the naming pattern is that sticker on the back mentions "WDR7500" and has no mention of "Archer". Signed-off-by: Srdjan Rosic <rosic@google.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47344 3c298f89-4303-0410-b956-a3cf2f4a3e73
* omap/Beagleboard: remove FEATURES overrideJohn Crispin2015-11-021-1/+0
| | | | | | | | It overrides the feature list of the whole target. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47343 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: enable seama mtdsplit parserJohn Crispin2015-11-021-0/+1
| | | | | | | | | D-Link DIR-610 A1 needs seama mtdsplit parser. This patch should fix #18046. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47341 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rt305x: update kernel config symbolsJohn Crispin2015-11-021-3/+4
| | | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47340 3c298f89-4303-0410-b956-a3cf2f4a3e73
* package/devel/perf: fix build for kernel 4.1John Crispin2015-11-021-0/+67
| | | | | | | | | | This fix contains 2 parts: - kernel 4.1: backport upstream patch "perf build: Do not fail on missing Build file" - add NO_LZMA=1 to perf MAKE_FLAGS to disable LZMA support Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47338 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 04:55:26 +0000