aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: update kernel 4.1 to version 4.1.23Rafał Miłecki2016-06-197-13/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49296 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Drop hacky switch workaround for failsafe on rt3x5x and rt5350.John Crispin2016-06-191-28/+9
| | | | | | | | | | | | The new rt3050 switch driver doesn't have problems with TCP when not using VLANs. This piece of code also broke failsafe for all routers where the LAN port is not wired to port 0 of the internal switch. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49293 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 0 on A5-V11.John Crispin2016-06-191-1/+2
| | | | | | | | | Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Disable all ethernet ports except port 4 on HT-TM02.John Crispin2016-06-191-0/+1
| | | | | | | | | Port 4 is the only ethernet port on this router, so disable all other PHYs in order to save power. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Get rt3050 ethernet ports to be disabled from the device tree.John Crispin2016-06-191-0/+81
| | | | | | | | | | | | | | | This patch allows configuring ports to be disabled in the device tree; this saves power, since disabling ports here actually disables power to ethernet PHYs. Line 444 enables all ethernet ports, so line 487 is getting zero ports to be disabled, except for port 5 in SoCs where this is not implemented as it will be sticky disabled in register POC0. Because of this, the code will still read the switch configuration and OR it to the device tree setting. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49290 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix comment in rt3050 ethernet switch driver.John Crispin2016-06-191-0/+24
| | | | | | | | | | | | Line 444 is actually enabling all switch ports by setting the disable bits to 0. This needs to be done because the bootloader sets all ports to disabled by default (which is the case for at least one router based on RT5350). So, this patch fixes the comment in line 443. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49289 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix documentation for the rt3050 switch driver.John Crispin2016-06-191-0/+23
| | | | | | | | The prefix used in the driver is now "mediatek" instead of "ralink". Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49288 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix multicast ICMPv6 for the rt3050 ethernet switch.John Crispin2016-06-191-0/+26
| | | | | | | | | | | | | | | | | | The FCT2 esw register should be set to 0x2500C to have "unknown IPv6 multicast" packets broadcasted to every port, instead of dropped. The previous value only let those packets go through ports 1 and 3. "Unknown IPv6 multicast" packets include packets needed by ICMPv6 echo requests addressed to well-known addresses, such as ff02::1 (MAC address is 33:33:00:00:00:01 in this case). Please note that by default ICMPv6 echo requests to ff02::1 are not replied to by the router because of ip6tables considering those packets to be invalid. But this is another bug/patch. ;) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49287 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-Link TL-WR810N supportJohn Crispin2016-06-1912-0/+174
| | | | | | | | | This patch adds support for the TP-Link TL-WR810N. https://wiki.openwrt.org/toh/tp-link/tl-wr810n Signed-off-by: Jens Steinhauser <jens.steinhauser@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49286 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VGV7510KW22BRN - set the phy clock sourceJohn Crispin2016-06-191-0/+6
| | | | | | | | | | | | | VGV7510KW2 with VRX288 v1.2 has brnboot 1.8 installed. Starting with this brnboot version, the "GPHY Clock Source" isn't set anymore by brnboot, with the result that xrx200-net fails to probe/initialize the phys. Use the phy clock source device tree binding to specify the clock source. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49284 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add device tree binding for the phy clock sourceJohn Crispin2016-06-191-0/+30
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VGV7510KW22BRN - support dual-imageJohn Crispin2016-06-191-1/+4
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: handle the dual-firmware layout of brnbootJohn Crispin2016-06-191-0/+93
| | | | | | | | | | | | | | | | | brnboot based devices can have two Image partitions. When flashing images via the brnboot recovery web interface, the Image partitions are written alternating. The current active Image partition is stored in the first byte of the Primary_Setting partition by using 0x00 for Code_Image_0 and 0x01 for Code_Image_1. By using the information about the active "Code Image", it is possible to ensure that the rootfs belongs to the current booted Image/Kernel. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: move partitions into partion table nodeJohn Crispin2016-06-1942-1006/+1253
| | | | | | | | | | Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49280 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use sysupgrade.bin postfix for tplink imagesJohn Crispin2016-06-191-3/+4
| | | | | | | | | | | | Use the same name for TP-Link images as it was with the old image build code. Move the BOARD_ID export to the TP-Link image build recipe, to indicate that the variable is only related in this context. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: VG3503J - use the same PHY led functionality as the OEM firmwareJohn Crispin2016-06-191-8/+8
| | | | | | | | | | | | | Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki article, the OEM Firmware uses the following PHY led functionality: gphy led 0: LINK/ACTIVITY gphy led 1: LINK gphy led 2: ACTIVITY Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49278 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix eth0 support for Ubiquiti UniFi AP ACJohn Crispin2016-06-191-0/+1
| | | | | | | Fix eth0 support for the Ubiquiti UniFi AP AC Signed-off-by: Paul Wassi <p.wassi at gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49277 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use the same functionality for all ethernet phys ledJohn Crispin2016-06-192-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VGV7510KW22 has the leds for LAN1-3 connected to pin1 of the phys and the led for LAN4 connect to pin0 of the phy. This results with the current configuration in a fast flashing LAN4 led as soon as a network cable is connected. Something similar was reported on the forum[1] for the VGV7519 as well. Since it isn't predicable to which pin a (single) phy led is connected, use the (default) pin1 functionality Constant On: 10/100/1000MBit Blink Fast: None Blink Slow: None Pulse: TX/RX for all ethernet phy leds. After checking pictures of all vr9 boards, it looks like only the VG3503J has more than one led connected per phy. Using the phy led device tree bindings to assign the functionality to the "additional" leds, the VG3503J phy leds should behave as before. Signed-off-by: Mathias Kresin <openwrt@kresin.me> [1] https://forum.openwrt.org/viewtopic.php?pid=321523 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49270 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: fix minor typos in 11G/22F phy driverJohn Crispin2016-06-191-2/+2
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49269 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Planex MZK-EX750NP.John Crispin2016-06-198-1/+174
| | | | | | | | | | | add support for Planex MZK-EX750NP. MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49268 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mediatek: sync patches and add more ethernet stability fixesJohn Crispin2016-06-1995-608/+436
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49265 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add m25p80 workaround for SPI flash writing problemsRafał Miłecki2016-06-191-0/+62
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49264 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mediatek: sync and patches add support for several boardsJohn Crispin2016-04-2798-262/+1178
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49263 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support SPI-NOR on dual flash devicesRafał Miłecki2016-04-271-0/+67
| | | | | | | | We need it to access NVRAM. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49262 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: switch to m25p80 and drop bcm53xxspiflashRafał Miłecki2016-04-263-21/+42
| | | | | | | | | | For some time now m25p80 supports 32 MiB flashes and we just needed to patch spi-nor to support JEDEC incompatible w25q128. Also by switching to m25p80 we gain accelerated SPI flash reads. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49260 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support JEDEC incompatible w25q128 in spi-norRafał Miłecki2016-04-261-0/+34
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49259 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the OMYlink OMY-G1John Crispin2016-04-2613-1/+172
| | | | | | | | | | https://wiki.openwrt.org/toh/omylink/omy-g1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49258 3c298f89-4303-0410-b956-a3cf2f4a3e73
* zynq: Add Zybo device supportJohn Crispin2016-04-263-1/+21
| | | | | | Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49257 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Zynq: Add Zedboard device supportJohn Crispin2016-04-263-1/+20
| | | | | | | Tested-by: Joe Zhang <jz21082@gmail.com> Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49256 3c298f89-4303-0410-b956-a3cf2f4a3e73
* zynq: Remove rdinit patchJohn Crispin2016-04-261-18/+0
| | | | | | | | | This is not required as long as CONFIG_TARGET_INIT_CMD is correctly configured. Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49255 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use dwc2 by default on all ar9 boardsJohn Crispin2016-04-267-9/+9
| | | | | | | | | | | | The dwc2 USB driver now works on Lantiq ar9, but the default is still ltq-hcd-ar9. This patch switches to dwc2 by default. v2: all ar9 boards (v1 was just for BTHOMEHUBV3A and WBMR) Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49254 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: install uboot-envtools by default on BTHOMEHUBV3AJohn Crispin2016-04-261-1/+1
| | | | | | | | | | | | | The only way to access the u-boot console on the BTHOMEHUBV3A is by soldering a serial console onto some really tiny pads. To enable installation without soldering it would be helpful to be able to modify the uboot environment from within the ramdisk image used as part of the installation process. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49253 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove read-only flag on two partitions on BTHOMEHUBV3AJohn Crispin2016-04-261-2/+0
| | | | | | | | | | | Remove read-only flag on two partitions on BTHOMEHUBV3A: uboot-config - otherwise fw_setenv command cannot be used. ath9k-cal - so that ath9k calibration data can be copied to the partition on a newly installed board. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49250 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: set both MPS 'and' MRSS to 128John Crispin2016-04-261-0/+23
| | | | | | | | | | | | Fixes some DMA issues with this platform. Because this isn't currently accepted, and can potentially disrupt other platforms (as read in commit log), I will leave this cns3xxx specific. Original Patch: https://patchwork.ozlabs.org/patch/600024/ Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49249 3c298f89-4303-0410-b956-a3cf2f4a3e73
* cns3xxx: backport pci fix for cns3xxx_write_configJohn Crispin2016-04-261-0/+19
| | | | | | | | | Fix is required to properly set pci config bits. Original Patch: https://patchwork.ozlabs.org/patch/596170/ Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49248 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for the Netgear WNDR3700v5John Crispin2016-04-268-0/+171
| | | | | | | | | | https://wiki.openwrt.org/toh/netgear/wndr3700 wndr3700v5 uses the single-core dual thread MediaTek MT7621S SoC. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49247 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add TP-Link TL-WR740N v6 support to trunkJohn Crispin2016-04-261-1/+8
| | | | | | | | | | | | This patch adds support for the TP-Link TL-WR740N v6 into OpenWrt trunk. Hardware wise, it's very similar to the TL-WR841N v10. See the forum thread [1]. Credit goes to the user 'traveler' who did the legwork and tested builds. Also thanks to Matthias Schiffer for clarifying the DEVICE_PROFILE settings. Signed-off by: Stijn Segers <francesco.borromini@inventati.org> [1]: https://forum.openwrt.org/viewtopic.php?pid=318704 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49245 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: simplify patch 613 and add missing error handlingJohn Crispin2016-04-262-6/+6
| | | | | | | | | Dynamic allocation of label can be simplified. Also add error handling to deal with failed memory allocation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49244 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mediatek: update patchesJohn Crispin2016-04-2692-315/+5246
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49243 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: Fix typo in LED diag script.John Crispin2016-04-261-1/+1
| | | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Acked-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49242 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: use new image build process for brnImagesJohn Crispin2016-04-261-14/+28
| | | | | | | | | | | | | | LZMA compress the kernel without dictionary, otherwise brnboot fails to uncompress the kernel. The filesystem parameter of mkbrncmdline was dropped since the used filesystem isn't exported in the kernel build step and at least in my tests everything works without the parameter. If the parameter is required for some reason, the static keyword "squashfs" can be used. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49241 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: remove orphaned tp-link image build stepsJohn Crispin2016-04-261-22/+0
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49239 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: build sysupgrade images for lantiqImageJohn Crispin2016-04-261-0/+2
| | | | | | | | Tested with VGV7510KW22NOR. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: new image build process - fix kernel entry addressJohn Crispin2016-04-261-1/+1
| | | | | | | | | | | Set the kernel entry address to the same value as it is used for the old image build build process. Fixes boot of uImages on VGV7510KW22NOR and others. Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49237 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Planex MZK-EX300NPJohn Crispin2016-04-268-1/+153
| | | | | | | | | | MZK-EX300NP is MT7620A based wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49235 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Planex CS-QR10John Crispin2016-04-268-1/+187
| | | | | | | | | | | | CS-QR10 is MT7620A based IP Camera. the camera and sound does not work with kernel 4.4. - camera chip is sn9c291. - sound chip is wm8960. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport support for accelerated SPI flash readRafał Miłecki2016-04-263-0/+382
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49233 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: backport BCM5301X DT patch specifying SPI controllerRafał Miłecki2016-04-261-0/+58
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49232 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix build of targetHauke Mehrtens2016-04-241-10/+10
| | | | | | | | | | | | Makes the patches apply again by fixing the white space broken patch. This problem was introduced in r49212. Closes #22248 and #22259 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: add missing semicolonLuka Perkov2016-04-241-1/+1
| | | | | | | | | A missing semicolon in the gpio-keys-polled section of ox820-akitio.dts caused the build to break. Add it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49219 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 17:34:56 +0000