aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
...
* kirkwood: Migrate Iconnect to new ubi image formatLuka Perkov2016-06-191-1/+1
* target: socfpga: Add Altera SoCFPGA supportLuka Perkov2016-06-1923-0/+1578
* ramips: fix DTB generationLuka Perkov2016-06-191-1/+1
* ramips: Change all '/include/' clauses to '#include' so preprocessing can be ...Luka Perkov2016-06-19175-176/+176
* ramips: Add hex prefix (0x) to dtsi reg properties where needed.Luka Perkov2016-06-199-29/+29
* ramips: introduce serial0 aliasesLuka Perkov2016-06-1910-10/+32
* brcm47xx: fix wgt634u port assignment, broken since openwrt r47866Luka Perkov2016-06-191-1/+1
* ramips: mt7620: [UPSTREAM] fix USB frequency scalingLuka Perkov2016-06-191-0/+33
* ramips: Fix alphabetical sorting for 02_networkLuka Perkov2016-06-191-11/+11
* ramips: Don't use a VLAN for the single ethernet port of the A5-V11.Luka Perkov2016-06-191-5/+2
* ramips: Fix network for routers without VLANs on eth0.Luka Perkov2016-06-191-6/+2
* kernel: add workaround to rebuild vdso-o32.so.dbgLuka Perkov2016-06-191-2/+13
* kernel: add a workaround to rebuild vdso.so.dbg after genvdsoLuka Perkov2016-06-191-0/+11
* lantiq: fix xway image buildingLuka Perkov2016-06-191-3/+3
* x86: remove old references to kmod-acpi-buttonLuka Perkov2016-06-192-2/+2
* kernel: fix ip6_tunnel compilationLuka Perkov2016-06-191-2/+2
* image / basefiles: make console password configurableluka2016-06-1918-39/+39
* x86: search PARTUUID in any block deviceLuka Perkov2016-06-191-1/+2
* x86: make sysupgrade work without partxLuka Perkov2016-06-191-6/+28
* kernel: update kernel 4.1 to version 4.1.23Rafał Miłecki2016-06-197-13/+13
* ramips: Drop hacky switch workaround for failsafe on rt3x5x and rt5350.John Crispin2016-06-191-28/+9
* ramips: Disable all ethernet ports except port 0 on A5-V11.John Crispin2016-06-191-1/+2
* ramips: Disable all ethernet ports except port 4 on HT-TM02.John Crispin2016-06-191-0/+1
* ramips: Get rt3050 ethernet ports to be disabled from the device tree.John Crispin2016-06-191-0/+81
* ramips: Fix comment in rt3050 ethernet switch driver.John Crispin2016-06-191-0/+24
* ramips: Fix documentation for the rt3050 switch driver.John Crispin2016-06-191-0/+23
* ramips: Fix multicast ICMPv6 for the rt3050 ethernet switch.John Crispin2016-06-191-0/+26
* ar71xx: add TP-Link TL-WR810N supportJohn Crispin2016-06-1912-0/+174
* lantiq: VGV7510KW22BRN - set the phy clock sourceJohn Crispin2016-06-191-0/+6
* lantiq: add device tree binding for the phy clock sourceJohn Crispin2016-06-191-0/+30
* lantiq: VGV7510KW22BRN - support dual-imageJohn Crispin2016-06-191-1/+4
* lantiq: handle the dual-firmware layout of brnbootJohn Crispin2016-06-191-0/+93
* lantiq: move partitions into partion table nodeJohn Crispin2016-06-1942-1006/+1253
* lantiq: use sysupgrade.bin postfix for tplink imagesJohn Crispin2016-06-191-3/+4
* lantiq: VG3503J - use the same PHY led functionality as the OEM firmwareJohn Crispin2016-06-191-8/+8
* ar71xx: Fix eth0 support for Ubiquiti UniFi AP ACJohn Crispin2016-06-191-0/+1
* lantiq: use the same functionality for all ethernet phys ledJohn Crispin2016-06-192-6/+14
* lantiq: fix minor typos in 11G/22F phy driverJohn Crispin2016-06-191-2/+2
* ramips: add support for Planex MZK-EX750NP.John Crispin2016-06-198-1/+174
* mediatek: sync patches and add more ethernet stability fixesJohn Crispin2016-06-1995-608/+436
* bcm53xx: add m25p80 workaround for SPI flash writing problemsRafał Miłecki2016-06-191-0/+62
* mediatek: sync and patches add support for several boardsJohn Crispin2016-04-2798-262/+1178
* bcm53xx: support SPI-NOR on dual flash devicesRafał Miłecki2016-04-271-0/+67
* bcm53xx: switch to m25p80 and drop bcm53xxspiflashRafał Miłecki2016-04-263-21/+42
* bcm53xx: support JEDEC incompatible w25q128 in spi-norRafał Miłecki2016-04-261-0/+34
* ar71xx: Add support for the OMYlink OMY-G1John Crispin2016-04-2613-1/+172
* zynq: Add Zybo device supportJohn Crispin2016-04-263-1/+21
* Zynq: Add Zedboard device supportJohn Crispin2016-04-263-1/+20
* zynq: Remove rdinit patchJohn Crispin2016-04-261-18/+0
* lantiq: use dwc2 by default on all ar9 boardsJohn Crispin2016-04-267-9/+9