aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: use transfer_one instead of transfer_one_message on rt2880 spiJohn Crispin2015-11-221-65/+62
| | | | | | | | | | | | * use kernel buildin transfer_one_message. we only need to implement transfer_one and set_cs function * should support use gpio as cs pin * deselected the spi device when setup and add debug info * only reset device when first driver probe Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47579 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: move rt2880 spi clock and reset init code to spi_prepare_messageJohn Crispin2015-11-221-68/+62
| | | | | | | | | | before spi transfer. use spi_prepare_message to setup spi hardware. it will setup MSB, spi mode and speed remove sys_freq member and speed check code Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47578 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve rt2880 spi setupJohn Crispin2015-11-221-11/+62
| | | | | | | | | | * check clock rate, SPI mode, and word sizes * setup spi polarity * enable spi1 hw if need Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47577 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: clean up rt2880 spi probe/removeJohn Crispin2015-11-221-25/+34
| | | | | | | | | | * fill struct according to the member order * add error clean up * set min/max spi speed. so we don't need to check again Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47576 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve rt2880 spi wait ready functionJohn Crispin2015-11-221-16/+15
| | | | | | | | | | | use loops_per_jiffy, spi clock speed and write bytes to get the spi loop count. if loop to 0 than spi operation timeout. remove usleep. we only write 1 byte to spi device. use busy loop would be better. Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: remove rt2880 spi lock and clean bit operationJohn Crispin2015-11-221-18/+5
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47574 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add rt2880/mt7620 spi register definesJohn Crispin2015-11-221-2/+63
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47573 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: add device detection and use it for network, leds and preinitJohn Crispin2015-11-229-18/+110
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47572 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe moduleJohn Crispin2015-11-216-0/+660
| | | | | | | | | | | | | * both patches (qcserial/qmi_wwan) were submitted upstream[1,2] * build tested on 3.18 and 4.1 * run tested on imx6 platform with 4.1 1. http://article.gmane.org/gmane.linux.usb.general/132998 2. http://article.gmane.org/gmane.linux.usb.general/133113 Signed-off-by: Petr Štetiar <ynezz@true.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47567 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: add phy led config support over devicetree bindingsJohn Crispin2015-11-212-2/+534
| | | | | | | | | | | This patch adds the posibility to config the led behaviour of the lantiq phys over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G for 3.18 and 4.1. I have also added a register description overview for applicable values. This goes to the documentation folder in the linux kernel. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47566 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add missing nand layer hackJohn Crispin2015-11-211-0/+179
| | | | | | | | | | | | | | | | | It turned out that mtk_nand driver uses some sophisticated accounting and a general nand code must be patched. This patch adds required read and erase calls to a general nand code. I used a code for re6500 released by Linksys as a reference. All required operations (erase, write and read) are usable. However I found that jffs2 filesystem can be created only on top of a ubi volume. I tried to create jffs2 directly on mtd device but pages with clean markers are became uncorrectable. Signed-off-by: Kirill Berezin <fyiwdt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47565 3c298f89-4303-0410-b956-a3cf2f4a3e73
* lantiq: tweak DWC2 default parametersJohn Crispin2015-11-212-10/+10
| | | | | | | | | | | | | | | | | | | | | This patch improves the default configuration of DWC2 on lantiq SoCs somewhat: * Set maximum packet count to largest allowed value by the DWC2 (511) * Use 16-bit DMA bursts * Divide fifo buffers more evenly Default fifo buffer sizes from original ltq-hcd driver seem really irrational. For example according to DWC2 data book rxfifo size of 240 will not fit even a single full length USB packet. On the other hand non-periodic tx fifo size of 240 is more than enough to fit one complete packet. Change the sizes around to improve the situation and to fix some issues especially with isochronous USB transfers. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47563 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: enable hard float ABIJohn Crispin2015-11-213-4/+4
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: add support for multi-device imagesJohn Crispin2015-11-213-44/+16
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47561 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: rename image device definitionJohn Crispin2015-11-211-5/+5
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: revert sd image extension to .imgJohn Crispin2015-11-211-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47559 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm2708: simplify gzip image generationJohn Crispin2015-11-211-11/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47558 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: init usb power for Lenovo Y1SJohn Crispin2015-11-211-0/+21
| | | | | | Signed-off-by: Shonn Lu <countrysideboy@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47557 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the SingleProfile kernel size limit for dLAN devicesJohn Crispin2015-11-211-2/+2
| | | | | | | | it ends up as $(2) of CatFiles and must be a plain decimal value. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47555 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-2110-6/+162
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703NJohn Crispin2015-11-211-1/+1
| | | | | | | | | The hwid check was wrong, causing the AR71XX_MODEL value to end with a space (as $hwver was unset). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* oxnas: add missing platform bindings for stmmac glueJohn Crispin2015-11-211-0/+19
| | | | | | | | | | | r47218 was missing needed changes which were accidentally ommitted from the patch. This should fix #20878 Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionHauke Mehrtens2015-11-211-0/+1
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix PCIe reset gpio handling - the core already handles the ↵Felix Fietkau2015-11-212-16/+60
| | | | | | | | active-low flag Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: assert AHB PCIe reset during initFelix Fietkau2015-11-212-14/+36
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: reduce PCIe buffer size setting to fix potential data corruption issuesFelix Fietkau2015-11-212-4/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47545 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix pcie reset gpio definions and move them to the common .dtsi fileFelix Fietkau2015-11-2122-266/+170
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix pcie tx0-term-offset settingFelix Fietkau2015-11-2110-12/+16
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsetsFelix Fietkau2015-11-212-12/+12
| | | | | | | | Fixes QCA99x0 detection issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvebu: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-202-9/+9
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mpc85xx: migrate network setup to board detection frameworkJo-Philipp Wich2015-11-201-7/+5
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again)Jo-Philipp Wich2015-11-201-5/+6
| | | | | | | | | | | | | | When fixing the model string for WNDR3700v2 which contain a model string followed by 0xff in r46455, the match for other versions of the WNDR3700v2 which just contain lots of 0xff broke (as the 0xff $model is checked for is stripped off). Fix by stripping off non-printable characters only for the actual output string, but not for the internal matching. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config optionHauke Mehrtens2015-11-203-0/+3
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47536 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: migrate led and network setup to board detection frameworkJo-Philipp Wich2015-11-202-10/+11
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47534 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: ventana: remove invalid video options from bootscriptLuka Perkov2015-11-201-75/+1
| | | | | | | | | Removed video related kernel params that are only appropriate for the Freescale downstream vendor kernel and not appriate for mainline linux. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47532 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: refresh patchesLuka Perkov2015-11-197-44/+9
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47513 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: remove obsolete VENTANA_DTS from profileLuka Perkov2015-11-181-15/+0
| | | | | | | | The device-tree files are now specified in the image Makefile Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47512 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add Vetnana LVDS supportLuka Perkov2015-11-183-0/+150
| | | | | | | | These patches have been submitted to upstream Linux and are pending acceptance. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: ventana: fix GW16083 device-tree patchLuka Perkov2015-11-181-16/+16
| | | | | | | | | | The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in the conversion from 3.18 to 4.1. This patch resolves that and puts the device-tree nodes in the correct place. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47510 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: drop support for kernel 3.18Luka Perkov2015-11-1810-1384/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: convert ventana images to squashfs+ubifs overlayLuka Perkov2015-11-183-111/+285
| | | | | | | | | | | | | | | | | | | | | | Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47508 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: kernel: add UBI_BLOCK supportLuka Perkov2015-11-181-1/+1
| | | | | | | | UBI_BLOCK support is needed for mounting squashfs over UBI Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: switch to v4.1Luka Perkov2015-11-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47506 3c298f89-4303-0410-b956-a3cf2f4a3e73
* imx6: add Gateworks GW551x supportLuka Perkov2015-11-183-0/+507
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47505 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: nsa310s: fix partition sizeLuka Perkov2015-11-182-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47504 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add CONFIG_SSB_HOST_SOC symbolRafał Miłecki2015-11-163-0/+3
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* brcm47xx: backport BCM47xx MIPS commits from 4.3 and 4.4-rc1Rafał Miłecki2015-11-169-8/+405
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47484 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport ssb changes from 4.4-rc1Rafał Miłecki2015-11-162-0/+1372
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47483 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: remove 3.18 supportFelix Fietkau2015-11-158-2128/+0
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47474 3c298f89-4303-0410-b956-a3cf2f4a3e73
* octeon: switch to 4.3Felix Fietkau2015-11-151-1/+1
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47473 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 02:32:42 +0000