aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add support for Microduino MicroWRTJohn Crispin2015-04-091-0/+107
| | | | | | | | | | | | | | | | MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengkai81@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for ZTE Q7John Crispin2015-04-011-0/+111
| | | | | | | | | | | | | | | ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45208 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add default pinctrl node for mt7621 eval kitJohn Crispin2015-03-261-0/+9
| | | | | | | | fixes #19213 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45022 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT power buttonJohn Crispin2015-03-261-0/+5
| | | | | | Signed-off-by: Jay Weng <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45019 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-1166 green power LEDFelix Fietkau2015-03-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix mt7621 i2c nameJohn Crispin2015-03-171-2/+2
| | | | | | Signed-off-by: zouxf <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44868 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add wifi 5g dts info for cy-swr1100John Crispin2015-03-131-1/+8
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44739 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: resize the flash partition for FireWRTJohn Crispin2015-03-121-2/+2
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT IO multiplexingJohn Crispin2015-03-111-0/+8
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44660 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix the mt7628 dts fileJohn Crispin2015-02-192-10/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44494 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-161-0/+135
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Kingston MLW221 and MLWG2 cleanupJohn Crispin2015-02-092-115/+115
| | | | | | | | | | MLW221 dts use tabs NOT spaces. MLWG2 dts typo and 1 tab not spaces 01_leds and diag.sh cleanup Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi MiniJohn Crispin2015-02-091-1/+2
| | | | | | | | | This patch sets the correct location of the mt76 radio in the pcie bridge (pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add mt76 node for Lenovo Y1 and Y1S.John Crispin2015-02-091-0/+9
| | | | | | | | | Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch. Tested on Lenovo Y1. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44354 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add 3.18 supportJohn Crispin2015-02-0911-5/+46
| | | | | | | | keep default as 3.14, mt7621 gic need to be ported to 3.18 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT button detailJohn Crispin2015-02-021-0/+12
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44242 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT led detailJohn Crispin2015-02-021-0/+9
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44241 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add ethernet macaddr to dts for FireWRTJohn Crispin2015-02-021-0/+5
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44240 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-021-0/+148
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-221-0/+114
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve and fix Memory 2 Move supportJohn Crispin2015-01-221-17/+11
| | | | | | | | | | | | | | | | | This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for firewrtJohn Crispin2015-01-201-0/+81
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add ethernet fe and esw reset control bitFelix Fietkau2015-01-189-0/+44
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44042 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-171-0/+107
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register mt76 device tree info for WSR-1166DHPFelix Fietkau2015-01-171-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44010 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register mt7621 pcie through device treeFelix Fietkau2015-01-171-0/+49
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44009 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+113
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for Kingston MLWG2John Crispin2015-01-171-0/+118
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add i2c pingroup to the pinmux for rt-n14uJohn Crispin2015-01-171-1/+1
| | | | | | | | i2c pins are wired to wps a reset button Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43985 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-091-0/+111
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-081-16/+16
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: update BR-6475ND dtsJohn Crispin2015-01-081-1/+3
| | | | | | | | Update firmware location for 2.4GHz radio on the Edimax BR-6475nD. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-600DHP flash layoutFelix Fietkau2015-01-031-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43819 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-1166DHP flash layoutFelix Fietkau2015-01-031-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43818 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-{600,1166} namesFelix Fietkau2015-01-032-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43817 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: on mt7621 only enable xhci for the eval board (still needs patch ↵Felix Fietkau2015-01-032-0/+6
| | | | | | | | cleanup to take effect) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43815 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rework and fix m25p80 chunked-io supportFelix Fietkau2015-01-022-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: remove partitoon map from mt7621.dtsiJohn Crispin2014-12-151-31/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43720 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: drop old pinmux nodes from dts filesJohn Crispin2014-12-144-27/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43701 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-131-0/+106
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: make uartf functional on AWM002John Crispin2014-12-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43664 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: generate factory images for Nexx devicesJohn Crispin2014-12-073-42/+89
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43541 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: mt7621 is a 1004KcJohn Crispin2014-12-031-1/+5
| | | | | | Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43514 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix pcie resetJohn Crispin2014-11-171-2/+11
| | | | | | | | | some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166DFelix Fietkau2014-11-161-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43283 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use mediatek,mtd-eeprom instead of ralink for mt76Felix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43282 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: few updates tot he sdhci probe codeJohn Crispin2014-11-155-2/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43275 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: update pcie driver to load ranges from dtsJohn Crispin2014-11-143-3/+97
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43249 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for WSR-600/1166John Crispin2014-11-142-0/+297
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43244 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-122-26/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43238 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 15:50:56 +0000