aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add additional uarts to mt7628.dtsiJohn Crispin2015-07-241-2/+63
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46477 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for STORYLiNK SAP-G3200U3John Crispin2015-07-241-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN. It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons * ethernet switch and USB diag LEDs * UART * GPIOs Tested and not working: * LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?) * failsafe mode (known problem, needs workaround like other MTK based devices) More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46454 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Planex MZK-DP150NJohn Crispin2015-07-171-0/+98
| | | | | | | | | This patch add support for Planex MZK-DP150N. a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46405 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: added gpio spi refclk support for wrtnode boardJohn Crispin2015-07-141-1/+1
| | | | | | | | | This syncs the dts file with the one provided by the wrtnode team: https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46359 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: added led support for wrtnode boardJohn Crispin2015-07-141-0/+12
| | | | | | | | | This syncs the dts file with the one provided by the wrtnode team: https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: adding support for OY-0001 Wireless RouterJohn Crispin2015-07-141-0/+123
| | | | | | | | | | Adding support for OY-0001 Wireless Router. OY-0001 is a wireless router made by oyewifi.com. Below is the details: MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. Signed-off-by: Tom Deng <2579131212@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: mt7620 ArcherC20i USB supportJohn Crispin2015-07-141-0/+8
| | | | | | | | | USB port of TP-Link Archer C20i does not work with trunk and CC. This patch adds two nodes (ehci and ohci) to the device tree enabling USB. Signed-off-by: Gunnar Thorburn <gunnar@thorburn.se> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add Support for the Linksys RE6500John Crispin2015-06-181-0/+115
| | | | | | | | | | This patch adds support for the Linksys RE6500 Range Extender http://wiki.openwrt.org/toh/linksys/re6500 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46043 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for the D-Link DCS-930 B1John Crispin2015-06-181-0/+103
| | | | | | | | http://wiki.openwrt.org/toh/d-link/dcs-930l Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46042 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for PandoraBox PBR-M1John Crispin2015-06-181-0/+150
| | | | | | | | | This patch is for PandoraBox PBR-M1 which is based on mt7621, all the features work fine, including rtc, leds, button, usb3.0, etc. Signed-off-by: tymon <banglang.huang@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46041 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for RT5350F-OLinuXino V2John Crispin2015-06-052-0/+180
| | | | | | | | | | | Version 2 : White spaces and alphabetical order problems fixed Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info : https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45902 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix the memory map on FireWRTFelix Fietkau2015-06-051-1/+1
| | | | | | | | | | | | | | | Avoid the use of memory marked as reserved MT7621 support 512MB memory. According to "MT7621_ProgrammingGuide_Preliminary_Platform.pdf" 0x0~0x1c000000 448MB 0x20000000~0x4000000 64MB total 512MB Signed-off-by: wengbj <fl.service@t-firefly.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45892 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: use highmem on the FireWRT boardFelix Fietkau2015-06-041-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45890 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix swapped colors for router LED on WHR-1166D (thx, Björn)Felix Fietkau2015-05-301-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: rename status led to wifi on WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-303-12/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45846 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix buttons on WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-293-24/+30
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45845 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix partition layout of WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-293-18/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45843 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile RouterJohn Crispin2015-05-231-0/+111
| | | | | | | | | | MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang <atliang@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45724 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix switch names for several boards in device treeJohn Crispin2015-05-233-4/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45723 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-231-0/+114
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layoutFelix Fietkau2015-04-192-22/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45507 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for Microduino MicroWRTJohn Crispin2015-04-091-0/+107
| | | | | | | | | | | | | | | | MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengkai81@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add support for ZTE Q7John Crispin2015-04-011-0/+111
| | | | | | | | | | | | | | | ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45208 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add default pinctrl node for mt7621 eval kitJohn Crispin2015-03-261-0/+9
| | | | | | | | fixes #19213 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45022 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT power buttonJohn Crispin2015-03-261-0/+5
| | | | | | Signed-off-by: Jay Weng <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45019 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix WSR-1166 green power LEDFelix Fietkau2015-03-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix mt7621 i2c nameJohn Crispin2015-03-171-2/+2
| | | | | | Signed-off-by: zouxf <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44868 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add wifi 5g dts info for cy-swr1100John Crispin2015-03-131-1/+8
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44739 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: resize the flash partition for FireWRTJohn Crispin2015-03-121-2/+2
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44691 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT IO multiplexingJohn Crispin2015-03-111-0/+8
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44660 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix the mt7628 dts fileJohn Crispin2015-02-192-10/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44494 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-161-0/+135
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44470 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Kingston MLW221 and MLWG2 cleanupJohn Crispin2015-02-092-115/+115
| | | | | | | | | | MLW221 dts use tabs NOT spaces. MLWG2 dts typo and 1 tab not spaces 01_leds and diag.sh cleanup Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi MiniJohn Crispin2015-02-091-1/+2
| | | | | | | | | This patch sets the correct location of the mt76 radio in the pcie bridge (pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: Add mt76 node for Lenovo Y1 and Y1S.John Crispin2015-02-091-0/+9
| | | | | | | | | Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch. Tested on Lenovo Y1. Signed-off-by: 郭传鈜 <gch981213@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44354 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add 3.18 supportJohn Crispin2015-02-0911-5/+46
| | | | | | | | keep default as 3.14, mt7621 gic need to be ported to 3.18 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT button detailJohn Crispin2015-02-021-0/+12
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44242 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add FireWRT led detailJohn Crispin2015-02-021-0/+9
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44241 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add ethernet macaddr to dts for FireWRTJohn Crispin2015-02-021-0/+5
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44240 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-021-0/+148
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44238 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-221-0/+114
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: improve and fix Memory 2 Move supportJohn Crispin2015-01-221-17/+11
| | | | | | | | | | | | | | | | | This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for firewrtJohn Crispin2015-01-201-0/+81
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44055 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add ethernet fe and esw reset control bitFelix Fietkau2015-01-189-0/+44
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44042 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-171-0/+107
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44016 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register mt76 device tree info for WSR-1166DHPFelix Fietkau2015-01-171-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44010 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: register mt7621 pcie through device treeFelix Fietkau2015-01-171-0/+49
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44009 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+113
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add support for Kingston MLWG2John Crispin2015-01-171-0/+118
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ramips: add i2c pingroup to the pinmux for rt-n14uJohn Crispin2015-01-171-1/+1
| | | | | | | | i2c pins are wired to wps a reset button Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43985 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 05:27:47 +0000