aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: ath9k: enable GPIO buttonsFelix Fietkau2016-03-051-0/+4
| | | | | | | | | | Enable platform-defined GPIO button support for ath9k device. Key poller is activated for attached platform buttons. Requires ath9k GPIO chip access. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48921 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR8216: improve mmd register accessJohn Crispin2016-03-043-13/+17
| | | | | | | | | | | Combine all bus operations for one MMD access in one function. Protecting all these bus operations with one lock also helps to avoid potential issues due to bus operations intercepting the register and data write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR8216: make ARL age time configurableJohn Crispin2016-03-044-4/+80
| | | | | | | | | | | | | | | | | The default TTL for address resolution table entries is 5 minutes for all members of the AR8216 family. This can cause issues if e.g. Wifi clients roam to another AP and their MAC appears on another switch port suddenly. Then the client may not be reachable until the old ARL entry expires. I would have expected the switch to invalidate old entries if it detects the same MAC on another port. But that's not the case. Therefore make the TTL for ARL entries configurable. The effective TTL will always be a multiple of 7 seconds. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48913 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR8216: remove redundant port number in MIB header lineJohn Crispin2016-03-041-2/+1
| | | | | | | | | The line before includes the port number anyway so there's no need to duplicate the port number in the MIB info header. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR8216: complement MIB counters with info in GiB / MiB / KiBJohn Crispin2016-03-041-5/+40
| | | | | | | | | | The decimal values especially for TxByte and RxGoodByte are hard to read once bigger amounts of data have been transferred. Therefore complement the decimal values with info in GiB / MiB / KiB. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AR8216: don't display MIB counters if all are emptyJohn Crispin2016-03-041-1/+8
| | | | | | | | | | | | For unused switch ports all MIB values are zero. Displaying ~40 empty MIB counters is just confusing and makes it hard to read the output of swconfig dev <dev> show. Therefore, if all MIB counters for a port are zero, just display an info that the MIB counters are empty. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ath9k: enable platform WLAN LED nameFelix Fietkau2016-03-021-0/+1
| | | | | | | | | Enable platform-supplied WLAN LED name for ath9k device. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Acked-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48879 3c298f89-4303-0410-b956-a3cf2f4a3e73
* switch: allow Ethernet port LEDs to show specific port speeds onlyFelix Fietkau2016-02-251-5/+99
| | | | | | | | | | | | | This patch adds speed_mask special file to LEDs connected to switch ports via 'switch' trigger. It allows to choose which speeds to signal when link is up. If router has more than one LED per port, they may light up differently depending on how fast connection is. Default setting is 'all speeds' so backward compatibility with system scripts (for example uci) is maintained. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48775 3c298f89-4303-0410-b956-a3cf2f4a3e73
* switch: make LED port_mask file write handler use kstrtoul() functionFelix Fietkau2016-02-251-25/+16
| | | | | | | | | | | This patch changes swconfig_trig_port_mask_store() handler to utilize kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks to this change, new handler takes less memory and makes port_mask special file accept not only hexadecimal, but also decimal and octal numbers. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48774 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: support uimage with UBIRafał Miłecki2016-02-241-3/+7
| | | | | | | | This patch adds uimage firmware split support for ubi. Signed-off-by: YounJae Rho <luxflow@live.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48755 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add missing digest field to Seama headerRafał Miłecki2016-02-231-0/+1
| | | | | | | | | | | | | | | | | | | Seama format has 2 similar headers: container (seal) header and entity header. The first one has size always set to 0 and doesn't contain MD5 digest. When dealing with Seama on a flash we deal directly with an entity. You can see mtdsplit_parse_seama reads from offset 0 and expects entity to be there. Seama container is used by bootloader / interface only which extract entity out of it and flash it. That said we should fix our header struct. This is important as we calculate possible rootfs offset assuming it may be placed right after Seama entity. So far calculate offset was always 16B too low. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48754 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: support setting port linkRafał Miłecki2016-02-031-0/+31
| | | | | | | | | When dealing with Broadcom hardware we can simply use swconfig's generic helper, we just need to do some validation of requested state. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48623 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: provide PHY access to swconfigRafał Miłecki2016-02-033-0/+48
| | | | | | | | | Thanks to this change swconfig can access port PHYs e.g. when setting port link state with a generic helper. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add (PHY) generic helper setting port linkRafał Miłecki2016-02-032-0/+42
| | | | | | | | | | It's quite common for switches to have PHY per port so adding a generic helper setting link state will help many drivers. It just needs an API to access PHYs which this patch also adds. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: support Seama entity with UBIRafał Miłecki2016-02-012-3/+8
| | | | | | | | | | Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It means OpenWrt will want to have UBI in Sseama entity and should be able to detect it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48600 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: detect UBI partition when looking for rootfsRafał Miłecki2016-02-012-0/+7
| | | | | | | | | This allows mtdsplit parsers work with UBI which is very popular on NAND flases. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48599 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: modify rootfs helpers to provide partition typeRafał Miłecki2016-02-019-26/+42
| | | | | | | | | | Our mtdsplit parsers may want to create partition with name choice based on partition file system (e.g. SquashFS vs. JFFS2). This patch allows passing extra argument pointing to variable that will be set properly. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: document Seama splitter a bitRafał Miłecki2016-01-251-8/+10
| | | | | | | | | | Rename kernel_size variable as it includes whole entity size, not just a kernel size. Also update comments to match it and describe better what are we checking/looking for. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48480 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: simplify init codeJonas Gorski2016-01-241-6/+1
| | | | | | | | | Directly return the return value of genl_register_family_with_ops() instead of storing it in a temporary variable, then returning it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: drop linux < 3.13 code pathsJonas Gorski2016-01-241-20/+0
| | | | | | | | | The oldest kernel we support is 3.18, no need to keep code paths for older kernels. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Netgear WPN824NJohn Crispin2016-01-191-0/+2
| | | | | | | | | | | | | | | | Add support for Netgear WPN824N. Hardware specs: * AR7240, 4 LAN ports, 1 WAN port * AR9285 WLAN * 32 MB RAM * 4 MB Flash * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color effect) * 3 Buttons (not supported) Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48356 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: update header register difinitionsJonas Gorski2016-01-181-1/+2
| | | | | | | | | BCM531x5 has two pontential cpu ports, and header mode can be enabled independently on both. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48302 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8327: add IGMP Snooping supportFelix Fietkau2016-01-172-0/+232
| | | | | | | | | | | | | | | This add support for IGMP Snooping on atheros switches (disabled by default), which avoids flooding the network with multicast data. Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding on each specific port, enabling it back again prevents each port from receiving all multicast packets. Partially based on: http://patchwork.ozlabs.org/patch/418122/ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48268 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit_squashfs: Align with the erase-block sizeFelix Fietkau2016-01-171-1/+1
| | | | | | | | | | | | | | On most image types the rootfs ends at an erase-block. However, at least with brnImages this is not the case: while the partitions are aligned with the erase-block size there is a 12 byte footer at the end of the partition which must not be touched by any filesystem. This lead to a rootfs_data partition which was not aligned properly (and thus ended up being readonly): 0x000000480000-0x00000085a800 : "rootfs_data" (128 KiB EB) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48263 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add support for EVA imagesFelix Fietkau2016-01-173-0/+102
| | | | | | | | | This allows splitting EVA images (usually found in fritz devices). The firmware will be split into a kernel and a separate rootfs partition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48262 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mtdsplit: add support for brnImagesFelix Fietkau2016-01-173-0/+110
| | | | | | | | | | | | | | | | | This adds brnImage (used with the brnboot bootloader) firmware parsing support. brnboot verifies the integrity of the firmware stored on the "Code Image" partitions by looking at the 12 byte footer at the very end of the partition. This footer contains the checksum of the original brnImage (kernel + rootfs/squashfs) and must not be touched (by our JFFS2 rootfs_data - otherwise the image will not be bootable anymore). Big thanks to Mathias Kresin for analyzing the brnImage structure and finding out the information how to keep images valid even when adding a nested rootfs_data partition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48261 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add API for setting port link speedRafał Miłecki2016-01-062-1/+50
| | | | | | | | | Some switches can force link speed for a port. Let's add API that will allow drivers to export this feature. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48142 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: don't stop timer on events for different interfacesRafał Miłecki2016-01-021-1/+2
| | | | | | | | | | This fixes regression introduced in my recent ledtrig-netdev commit. Events triggered by different interfaces were stopping timer so it wasn't working for tx/rx mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: add support for renamed devicesJohn Crispin2016-01-011-2/+3
| | | | | | | | | | | The ppp0 interface is renamed after the connection is established. Due to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of the renamed interface and literally ignores the device (no tx/rx indication, led isn't switched off with 'ifdown wan'). Signed-off-by: Mathias Kresin <openwrt@kresin.me> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48048 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINKJohn Crispin2015-12-231-47/+4
| | | | | | | | | As explained earlier, using SWITCH_TYPE_LINK gives more flexibility, it doesn't require e.g. string parsing to read some data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47999 3c298f89-4303-0410-b956-a3cf2f4a3e73
* swconfig: add SWITCH_TYPE_LINK and support sending link info to user spaceJohn Crispin2015-12-233-0/+74
| | | | | | | | | | | | | So far we were sending link data as a string. It got some drawbacks: 1) Didn't allow writing clean user space apps reading link state. It was needed to do some screen scraping. 2) Forced whole PORT_LINK communication to be string based. Adding support for *setting* port link required passing string and parting it in the kernel space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47997 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: reset link status & stats after changing device_nameRafał Miłecki2015-12-231-0/+2
| | | | | | | | | Previously switching to non-existing device (interface) could result in leaving LED on. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: drop locking from timer callback functionRafał Miłecki2015-12-231-11/+13
| | | | | | | | | | We may just delete timer on every trigger update and then start it again if needed. This will let us avoid both: races and locking in frequently called timer callback. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47987 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: switch rwlock to spinlockRafał Miłecki2015-12-231-20/+20
| | | | | | | | | | Read/write lock was adding useless complexity, there wasn't any real gain in case of this driver. Also switch to _bh variants to avoid deadlocks. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47986 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ledtrig-netdev: update base driver instead of patching it for every kernelRafał Miłecki2015-12-231-4/+4
| | | | | | | | | | All supported kernels require patching ledtrig-netdev in the same way, so it's safe to just move these changes to the base version of this driver. We needed these patches for some old kernels 2.6.36 and 3.11. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47962 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: rework/fix AR8337 MAC swap handlingFelix Fietkau2015-12-202-4/+4
| | | | | | | | | | | | | | In r45970 the MAC swap handling was made opt-in, however some boards have been forgotten during the conversion. Since the reference design uses this MAC swapping, and pretty much all known boards using this chip seem to do so too, enabling the swapping is a more reasonable default than leaving it disabled. Change the code to still allow boards to opt-out of this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: Allow configuration of LED polarity in platform data.John Crispin2015-12-171-0/+1
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: mvswitch: merge 3.10+ compile fix into the codeJonas Gorski2015-12-041-3/+3
| | | | | | | | | The lowest we support is 3.18, so no need to keep it as a separate patch. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47749 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: fix adm6996 initJohn Crispin2015-10-261-0/+6
| | | | | | | | | | | | Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset add dummy soft_reset callback to adm6996 driver, like it is done in ar8216. This fixes ticket #20147 Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47272 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: crypto: fix ubsec_ssb.c compilation with 4.0+Rafał Miłecki2015-09-251-1/+1
| | | | | | | | | SSB_DEVTABLE_END was removed in 4.0 by upstream commit 673e2baaa6d9 ("treewide: Remove unnecessary SSB_DEVTABLE_END macro"). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47047 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvsw61xx: match swconfig function namesFelix Fietkau2015-09-111-4/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46865 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mvsw61xx: use standard swconfig get_port_linkFelix Fietkau2015-09-111-76/+18
| | | | | | | | | The previous "link" and "status" functions were non-standard, and thus less useful for parsing. Signed-off-by: Claudio Leite <leitec@staticky.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46864 3c298f89-4303-0410-b956-a3cf2f4a3e73
* yaffs2: remove __TIME__ __DATE__ macrosFelix Fietkau2015-09-111-3/+3
| | | | | | | | | prevent compiler errors with gcc 4.9 increase reproducibility Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46858 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Previously, all VLANs (port-based or 802.1q) were sharingImre Kaloz2015-08-212-4/+19
| | | | | | | | | | | | | | | | | | | a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1). This also clears any bootloader-set FDB defaults. This had caused issues creating port-based VLANs when mappings overlapped previous VLANs. Packets destined to a port not in the default port group flooded all ports. Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC) Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: crypto: remove IRQF_DISABLEDJohn Crispin2015-08-173-3/+3
| | | | | | | | | | no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46671 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: yaffs2: update to version from 2015-06-02Hauke Mehrtens2015-08-155-42/+75
| | | | | | | | | | | In addition to the update this also fixes compile problems with kernel 4.1. This closes #20323. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46609 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: add swconfig attributes for ARL table flushingFelix Fietkau2015-07-153-1/+67
| | | | | | | | Add swconfig attributes for flushing the ARL table globally or per port. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46382 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: adjust ATU flushing in case of link changesFelix Fietkau2015-07-151-6/+4
| | | | | | | | | | If a link goes down, don't flush the complete ARL table. Only flush the entries for the respective port. Don't touch ARL table if a link goes up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46381 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: add ARL table flushing per portFelix Fietkau2015-07-154-4/+47
| | | | | | | | | | | | | Adds functions for flushing ARL table entries per port. Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316 is based on the AR8236 datasheet and assumes that the three chips share a common ATU register layout. Compile-tested only for AR8216/AR8236/AR8316. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46380 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: add reading ARL table for AR8216/AR8236/AR8316Felix Fietkau2015-07-152-8/+98
| | | | | | | | | | | | | | | | Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316. It's based on the AR8236 datasheet and compile-tested only as I couldn't find datasheets for AR8216/AR8316 and don't own devices with these chips. The existing ar8216_atu_flush implementation was used for all three chip types, therefore I guess they share a common ATU register layout. More testing would be appreciated. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46379 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:33:11 +0000