aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: sysupgrade: move TRX specific code to separated functionRafał Miłecki2016-06-271-14/+20
| | | | | | | This will allow adding support for other formats (e.g. Seama) in a clean way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: pass datasize to mtd in hexadecimal formatRafał Miłecki2016-06-271-2/+1
| | | | | | This avoids extra calculation in bash script. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: fix partition typos in 09_fix_crcRafał Miłecki2016-06-271-1/+1
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: calculate TRX CRC32 using whole kernel partitionRafał Miłecki2016-06-271-1/+6
| | | | | | This provides better protection of flash data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* bcm53xx: drop Copyright header from two of my bash scriptsRafał Miłecki2016-06-192-5/+0
| | | | | | | | | | | | | | | Both scripts modified by this patch were added by me. First of all I incorrectly added OpenWrt as Copyright holder. It was wrong because: 1) I simply can't transfer my moral rights according to the Polish law 2) Transfering copyrights (economic rights) requires an agreement which I didn't sign with OpenWrt(.org). Other than that I don't find these trivial scripts important enough to put info about *my* copyrights in a header so this patch just drops them completely. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49377 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add switch config workaround for R8500 and DIR-885LRafał Miłecki2016-04-091-1/+4
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49160 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix regression in generating network configRafał Miłecki2016-04-091-3/+4
| | | | | | | | Syntax error was added in r49122. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49159 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add basic support for Netgear R7900Rafał Miłecki2016-04-092-9/+4
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49122 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: start working on Netgear R8500Rafał Miłecki2016-02-031-0/+3
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support Netgear R8500 in sysupgradeRafał Miłecki2016-01-301-0/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48572 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: specify magic expected in sysupgrade for D-Link DIR-885LRafał Miłecki2016-01-291-0/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: basic support for Seama format in sysupgradeRafał Miłecki2016-01-281-2/+33
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48535 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix MD5 in Seama format on flash after installing OpenWrtRafał Miłecki2016-01-281-1/+1
| | | | | | | | We need to fix Seama just like we fix TRX due to the rootfs mark. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48522 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: detect Seama sysupgrade formatRafał Miłecki2016-01-271-0/+8
| | | | | | | | It's used e.g. by D-Link devices. We don't support it yet. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48509 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-111-1/+1
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* all: remove dummy ucidef_set_interface_loopback() from board.dJo-Philipp Wich2015-12-031-2/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47744 3c298f89-4303-0410-b956-a3cf2f4a3e73
* board.d: remove redundant ucidef_set_interfaces_lan_wan() callsJo-Philipp Wich2015-12-031-1/+0
| | | | | | | | | | This removes calls to ucidef_set_interfaces_lan_wan() and ucidef_set_interfaces_lan() on boards where all relevant info can be inferred from the switch definition. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47722 3c298f89-4303-0410-b956-a3cf2f4a3e73
* board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()Jo-Philipp Wich2015-12-031-6/+5
| | | | | | | | | | | | This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47721 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: switch to ucidef_add_switch_ports()Jo-Philipp Wich2015-12-021-10/+10
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47692 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add workaround for Netgear R8000 networkRafał Miłecki2015-10-301-0/+17
| | | | | | | | | | | | According to the info from NVRAM we should use port 8 for the CPU (and interface eth2). Unfortunately it doesn't work right now, so lets switch to the port 5. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Forwardport of r46586 from 15.05 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support sysupgrade with Netgear R7000 original firmwareRafał Miłecki2015-08-261-0/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46732 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fallback to default_do_upgrade if NAND upgrade failsRafał Miłecki2015-06-061-0/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: drop useless shift in platform.shRafał Miłecki2015-06-061-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: extract TRX from image on the flyRafał Miłecki2015-06-061-13/+14
| | | | | | | | | Extracting TRX to separated file in /tmp/ just wastes some RAM while we can just pass a proper extracting command to the default_do_upgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: extract TRX partitions directly from vendor imageRafał Miłecki2015-06-061-3/+5
| | | | | | | | | Extracting full TRX out of vendor format is not needed as otrx supports passing TRX offset. This saves some RAM during sysupgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: try to fix network on Asus RT-AC87URafał Miłecki2015-05-161-0/+7
| | | | | | | | | | | | | | | | | | | This device seems to have switch port 7 connected to the CPU: vlan1ports=1 2 3 5 7* vlan2ports=0 7u it should be handled by eth1 and NVRAM seems to confirm that (no et0macaddr entry, existing et1macaddr & et1phyaddr entries). One of the remaining ports (4/8?) may be connected to the Quantenna SoC. Original firmware boot log contains following messages: (0x00,0x5d)Port 5 States Override: 0xfb (0x00,0x5f)Port 7 States Override: 0xfb (0x00,0x0e)Port 8 States Override: 0x0a (why does it force port 5 state?!) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45692 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix default network interface on Netgear R8000Rafał Miłecki2015-05-131-2/+11
| | | | | | | | | | It has 3 Ethernet interfaces, each of them connected to separated switch port. Default NVRAM uses switch port 8 as CPU which is connected to the 3rd interface (eth2). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45681 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sort ports from NVRAM entries before matching themRafał Miłecki2015-04-241-5/+7
| | | | | | | | Some devices have unsorted ports which may lead to broken config. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45575 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: check if new kernel fits partition sizeRafał Miłecki2015-04-211-2/+7
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45547 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: improve NAND warningsRafał Miłecki2015-04-211-2/+5
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45546 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: drop some debugging messageRafał Miłecki2015-04-211-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45544 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: allow flashing NAND devices without --forceRafał Miłecki2015-04-211-5/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45543 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade: support flashing TRX with UBI imageRafał Miłecki2015-04-211-3/+9
| | | | | | Signed-off-by: Dan Haab <dhaab@luxul.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45542 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)Rafał Miłecki2015-04-171-4/+4
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: make use of the new board detection layerFelix Fietkau2015-04-161-5/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add (disabled) support for upgrading kernel during sysupgradeRafał Miłecki2015-04-141-0/+17
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45445 3c298f89-4303-0410-b956-a3cf2f4a3e73
* otrx: change command line API to start with a modeRafał Miłecki2015-04-141-4/+4
| | | | | | | | This will allow adding more modes without options conflict. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45443 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: try to handle Netgear R8000 VLANs configRafał Miłecki2015-04-121-0/+7
| | | | | | | | | It seems to have few ports connected to CPU (only for CPU sending data?) as part of "SMP dual core 3 GMAC setup" feature. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45403 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: allow sysupgrade firmwares without UBI containing rootfsRafał Miłecki2015-04-121-3/+2
| | | | | | | | | | | | | In most cases it allows reverting back to the vendor firmware (as they usually don't use UBI). If users wants to do that we can't do anything anyway. Erease counters will be just lost. The only thing we do is warn: "Flashing firmware without UBI for rootfs. All erase counters will be lost." It still requires forcing sysupgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45392 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgradeRafał Miłecki2015-04-121-0/+28
| | | | | | | | | | We can now detect that provided firmware contains kernel and UBI image partitions. Flashing it in a sane way (keeping erase counters) still needs to be implemented. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45391 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: rework vendor fw handling to don't duplicate upgrade callsRafał Miłecki2015-04-121-29/+15
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45389 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: switch to the otrx for verifying TRX imagesRafał Miłecki2015-04-091-16/+6
| | | | | | | | This adds checking CRC32 of provided firmware image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45320 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: image: share function checking TRX in provided firmwareRafał Miłecki2015-04-071-6/+18
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45292 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: display all errors (not just the 1st one) when checking imageRafał Miłecki2015-04-071-10/+8
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45291 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: compare provided firmware magic with device magicRafał Miłecki2015-04-071-2/+29
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45290 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support flashing CHK and CyberTAN imagesRafał Miłecki2014-12-301-4/+16
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43800 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: support WAN connected to switch port 0Rafał Miłecki2014-12-201-2/+11
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43754 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: sysupgrade support for devices with serial flashRafał Miłecki2014-12-151-0/+118
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43719 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* bcm53xx: failsafe supportRafał Miłecki2014-12-112-0/+47
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43639 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 06:26:51 +0000