aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: add TP-Link TL-WA901ND-v4 supportJohn Crispin2016-04-0911-1/+144
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49158 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Compex WPJ342John Crispin2016-04-0913-0/+218
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49157 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix nondeterministic hangs during bootconsole/console handoverJohn Crispin2016-04-092-0/+108
| | | | | | | | | | | | | | | | | Reconfiguring the UART when the FIFO is not empty may cause the boot to hang. This hang is extremely suspectible to timing differences; recompiling the kernel with the same configuration, but different UTS_VERSION timestamps can yield images that hang more or less often. Sometimes images are produced that hang reproducibly. This patch should also make it into one of the next linux-stable releases, but it's better to get this fixed as soon as possible. Fixes #21773, #21857. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49156 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add OM5P-ACv2 to the OM5P-AC profileJohn Crispin2016-04-091-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49155 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-091-1/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49154 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACv2John Crispin2016-04-092-2/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49151 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the OpenMesh OM5P-ACv2John Crispin2016-04-092-1/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49150 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-096-0/+230
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49149 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create profile and build image for the OpenMesh OM5P-AC boardJohn Crispin2016-04-092-1/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49148 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-AC boardJohn Crispin2016-04-091-0/+4
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49147 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACJohn Crispin2016-04-092-3/+10
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49144 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the OpenMesh OM5P-ACJohn Crispin2016-04-093-0/+11
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49142 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh OM5P-AC boardJohn Crispin2016-04-096-0/+206
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49141 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WPN824N: enable buttonsJohn Crispin2016-04-011-5/+33
| | | | | | | | Enable buttons connected to the GPIOs of the AR9285. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49109 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WPN824N: set WLAN LED nameJohn Crispin2016-04-011-5/+2
| | | | | | | | | Make use of ap9x_pci_setup_wmac_led_name() to set the name of the WLAN LED. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49108 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix the revision of a few TP-LINK devices in AR71XX_MODEL to match ↵John Crispin2016-04-011-0/+8
| | | | | | | | | | | | | labels/image names Let's not confuse users about the revisions of their devices when we can easily avoid it. Not tested on real hardware. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49107 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: avoid AR71XX_MODEL ending with a space on some TP-LINK-like devicesJohn Crispin2016-04-011-4/+4
| | | | | | | | | | Instead of adding the space when combining $model and $hwver, add the space to the beginning of $hwver, so the resulting string won't end with a space when $hwver is set to the empty string. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49106 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: check both HWID and HWREV on upgrades of TP-LINK devicesJohn Crispin2016-04-011-4/+12
| | | | | | | | | There's no reason for us to be more lenient than the stock firmware, so better check the HWREV as well to avoid bricked devices. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49105 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2200: enable control of all LEDs and buttonsJohn Crispin2016-04-012-36/+124
| | | | | | | | | This patch provides full GPIO support for WNR2200 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49101 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2200: fix for random WLAN MACJohn Crispin2016-04-011-2/+37
| | | | | | | | | | Fix for invalid/random/duplicate WLAN MAC address in WNR2200. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49100 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add TL-WR841N/ND v11 supportJohn Crispin2016-04-011-1/+8
| | | | | | | | | | | | | | This patch adds support for the TP-Link TL-WR841N/ND to trunk. It is similar to the already supported v10 - see [1]. I have added support based on that topic; in the meantime it has been confirmed working (see the forum thread, and also [2]). Signed-off by Stijn Segers <francesco.borromini@inventati.org> [1]: https://forum.openwrt.org/viewtopic.php?id=61309 [2]: https://forum.openwrt.org/viewtopic.php?id=63657 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49099 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: cosmetic fix of alfa ap120c/ap96 orderingLuka Perkov2016-03-246-19/+19
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49086 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap120cLuka Perkov2016-03-2310-2/+179
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49082 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: migrate tplink cpe510 to new build stepsJohn Crispin2016-03-231-48/+26
| | | | | | | | | cpe510: Tested sysupgrade and initramfs. Untested: webIf w/ factory.bin & recovery.bin Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49081 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: allow builds of loader without cmdline injectingJohn Crispin2016-03-231-3/+7
| | | | | | | | | | | | | On most platforms the cmdline is supplied by the loader to the kernel. When using an elf loader with cmdline the size is bloated by 512k. For loader-elf platforms like the cpe510 better use loader-elf but patch the cmdline into the kernel. wdr1043: Tested loader still works using sysupgade image. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49080 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: introduce LOADER_TYPE to support elf loadersJohn Crispin2016-03-231-3/+4
| | | | | | | | | The loader decompress a lzma compressed kernel. Some bootloaders only support elf files like the tplink cpe510 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49079 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR1000v2: enable control of all LEDs and buttonsJohn Crispin2016-03-232-5/+128
| | | | | | | | | This patch provides full GPIO support for WNR1000v2 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49076 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add QCA955X GPIO mux and function definitionsJohn Crispin2016-03-238-76/+176
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for ath79_gpio_function_* on QCA955XJohn Crispin2016-03-232-5/+21
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49074 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg"John Crispin2016-03-231-13/+3
| | | | | | | | | | | | | Not all mach-* files set all boards correctly in ETH_CFG. They depend on some preset values by u-boot which were not previously modified by ath79_setup_qca955x_eth_cfg. Avoiding to modify them in this function keeps it backward compatible for these boards. This reverts commit 119b8ab2c2eac237ec4e9c4d0ed53df22b5c6978. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49072 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x"John Crispin2016-03-2317-29/+19
| | | | | | | | | | | | The default delays RXD 3. RDV 3, TXD 0, TXE 0 doesn't seem to work for some boards. These boards depend on the preset values of u-boot which may differ. This reverts commit f2d4bb96b62512caa161dcc2867c91692fb16a38. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49071 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR1750John Crispin2016-03-231-1/+23
| | | | | | | | | | | | The MR1750 must unset some bits in ETH_CFG which were set by u-boot to work correctly under OpenWrt. But the global function ath79_setup_qca955x_eth_cfg will not unset all of them to increase the backward compatiblity with older mach-* files. A private (simplified) version for MR1750 can be used instead. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49070 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900John Crispin2016-03-231-1/+23
| | | | | | | | | | | | The MR900 must unset some bits in ETH_CFG which were set by u-boot to work correctly under OpenWrt. But the global function ath79_setup_qca955x_eth_cfg will not unset all of them to increase the backward compatiblity with older mach-* files. A private (simplified) version for MR900 can be used instead. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49069 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR1000v2: fix for random WLAN MACJohn Crispin2016-03-201-2/+7
| | | | | | | | | | | Fix for invalid/random WLAN MAC address in WNR1000v2. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. This is the same fix as for WNR2000v3 and WNR612v2. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.1 to version 4.1.20Hauke Mehrtens2016-03-181-9/+14
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49035 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use PHY fixups for Open Mesh MR1750John Crispin2016-03-161-3/+22
| | | | | | | | | | | | | | | | | | The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in different ways. u-boot only modifies the ETH_CFG of the QCA955x based on the link speed. But OpenWrt can only modify the PHY delays based on the link speed. This can lead to communication problems when u-boot initializes the ETH_CFG for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY delays to an incompatible value. Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and only rely on the AT803x PHY settings. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49031 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Use PHY fixups for Open Mesh MR900John Crispin2016-03-161-3/+22
| | | | | | | | | | | | | | | | | | The delays of PHY/MAC on the MR900 are done by u-boot and OpenWrt in different ways. u-boot only modifies the ETH_CFG of the QCA955x based on the link speed. But OpenWrt can only modify the PHY delays based on the link speed. This can lead to communication problems when u-boot initializes the ETH_CFG for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY delays to an incompatible value. Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and only rely on the AT803x PHY settings. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49030 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955xJohn Crispin2016-03-1619-21/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some u-boot versions for QCA955x change the delays based on the link speed during boot. This usually breaks the support of other linkspeeds when OpenWrt is booted. It also conflicts with the at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own values in QCA955X_GMAC_REG_ETH_CFG. The default RGMII values from the Atheros u-boot are currently used to preset the existing mach files. These may have to be adjusted for boards using different values but which are not currently set them explicitely in OpenWrt. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Christian Beier <cb@shoutrlabs.com> Cc: Chris R Blake <chrisrblake93@gmail.com> Cc: Benjamin Berg <benjamin@sipsolutions.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Matthias Schiffer <mschiffer@universe-factory.net> Cc: Dirk Neukirchen <dirkneukirchen@web.de> Cc: Christian Mehlis <christian@m3hlis.de> Cc: Luka Perkov <luka@openwrt.org> Cc: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49029 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Clear bits in ath79_setup_qca955x_eth_cfgJohn Crispin2016-03-161-3/+13
| | | | | | | | | | | Some u-boot versions for QCA955x set currently not cleared bits depending on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c file is responsible to select the correct configuration bits and thus the ath79_setup_qca955x_eth_cfg has to clear the unset. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49028 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Extend the list of bits in QCA955X_GMAC_REG_ETH_CFGJohn Crispin2016-03-164-30/+36
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49027 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the OMYlink OMY-X1John Crispin2016-03-1612-0/+158
| | | | | | | | | | | | This patch adds support for the OMYlink OMY-X1 https://wiki.openwrt.org/toh/omylink/omy-x1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49026 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Arduino Yun board 'WLAN RST' button supportJohn Crispin2016-03-101-0/+21
| | | | | | | | This patch adds support for Arduino Yun board "WLAN RST" button. Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48983 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the Telldus TellStick ZNet LiteJohn Crispin2016-03-1013-0/+189
| | | | | | Signed-off-by: Micke Prag <micke.prag@telldus.se> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix qca956x ethernet initializationFelix Fietkau2016-03-071-3/+18
| | | | | | | | | Complete internal switch initialization for QCA956X. Set default mdio device if the interface mode of GE0 is not SGMII (fix ticket #21520). Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48937 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable USB packages for WNR2200 (fixes #21984)Felix Fietkau2016-03-061-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update kernel 4.4 to version 4.4.4Hauke Mehrtens2016-03-052-5/+5
| | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48933 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR612v2: enable control of all LEDs and buttonsFelix Fietkau2016-03-052-2/+74
| | | | | | | | | This patch provides full GPIO support for WNR612v2 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48924 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initializationFelix Fietkau2016-03-051-8/+8
| | | | | | | | | | This patch add speed_mask parameter to Ethernet port LED initialization during system startup. LEDs are configured to show amber light for 10 Mbps link and green for 100 Mbps as described on device label. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48923 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: WNR2000v3: enable control of all LEDs and buttonsFelix Fietkau2016-03-053-10/+143
| | | | | | | | | This patch provides full GPIO support for WNR2000v3 (LEDs and buttons). It exposes all LEDs to operating system, including Ethernet ones. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: ath9k: enable GPIO buttonsFelix Fietkau2016-03-052-0/+21
| | | | | | | | | | Enable platform-defined GPIO button support for ath9k device. Key poller is activated for attached platform buttons. Requires ath9k GPIO chip access. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48921 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-24 12:33:09 +0000