aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: convert tl-wr741nd v1/v2 to new image building code, add ↵Felix Fietkau2015-05-111-4/+68
| | | | | | | | infrastructure for building the loader Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45672 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45667 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-102-1/+10
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45656 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow mktplinkfw calls from the new image code to fail (because of ↵Felix Fietkau2015-05-081-3/+2
| | | | | | | | oversized images) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45646 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: allow tp-link initramfs images to exceed size limitsFelix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45645 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: move TPLINK-LZMA image to new build codeFelix Fietkau2015-05-081-66/+361
| | | | | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties. v2: set correct DEVICE_PROFILES for all images. v2: migrate TP-LINK TL-WR710N v2 which was committed after v1. v2: split very very long line `TARGET_DEVICES +=` into smaller parts Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45643 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45640 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45639 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45638 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for green LAN LEDS for wnr2000-v4Felix Fietkau2015-05-081-8/+40
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45637 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix amber WAN LED setting for wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45636 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make WLAN button RFKILL on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | | | | Users will now be provided with the inherent wifi toggle functionality of /etc/rc.button/rfkill Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45635 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: set all buttons to be active_low on wnr2000-v4Felix Fietkau2015-05-081-0/+3
| | | | | | | | | Originally pressing a button would trigger a release state and vice-versa, as observed from hotplug.d. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45634 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet on wnr2000-v4Felix Fietkau2015-05-081-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Most people report broken ethernet with upstream. Last year, user "franz.flasch" authored a working mach-file. His patch is outdated so I modernized it. Original patch and user commentary on page 1: https://forum.openwrt.org/viewtopic.php?pid=260861#p260861 I have figured out what the critical differences are between the two that caused upstream ethernet to break. 1) Both ath79_init_mac() functions calls must be invocated before any GMAC init 2) must init GMAC0 before GMAC1 That was enough to get upstream to function, but I wanted to enjoy my confidence having tested franz's patch for a week sucessfully, so I put his whole function in, which only features more differences in order of function calls. An expert should consider these changes, which could pose potential bugs/issues: 1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the ath79_setup_ar934x_eth_cfg() call. 2) Possible consequence of no longer explicitly setting ethernet duplex/speed. Review: With this patch, my ethernet and wireless works. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45633 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: track the correct WAN interface on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45632 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix LAN portmasks on wnr2000-v4Felix Fietkau2015-05-081-4/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45631 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use a common naming scheme for LEDS on wnr2000-v4Felix Fietkau2015-05-082-16/+16
| | | | | | | | | It is common that the router provider be used rather than product name. One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45630 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: make art partition read only on 16MB ew-dorin boardLuka Perkov2015-05-081-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45627 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix 82_patch_ath10kFelix Fietkau2015-05-081-2/+2
| | | | | | | | It has been broken since the new ath10k firmware introduced in r44656. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45624 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix leds and gpio on wpj344Luka Perkov2015-04-291-15/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45589 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix sysupgrade for compex-wpj344Luka Perkov2015-04-291-1/+1
| | | | | | | | Moved board to the right magic case. Signed-off-by: Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45588 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Add support for Ubiquiti Rocket M XW devicesJohn Crispin2015-04-217-2/+64
| | | | | | | | | This patch adds support for the XW version of the Rocket M series devices manufactured by Ubiquiti, based on the Atheros AR9342 SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45553 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136John Crispin2015-04-215-131/+28
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge ap81 patches into oneJohn Crispin2015-04-213-117/+3
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45551 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-LINK TL-WR710N v2John Crispin2015-04-211-1/+3
| | | | | | | | TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB). Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh patchesLuka Perkov2015-04-207-15/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45528 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for compex wpj344Luka Perkov2015-04-209-7/+224
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45527 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Increase RXD/RDV to 2 on OM5P-ANFelix Fietkau2015-04-201-3/+2
| | | | | | | | | | It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV but 2. These was found when testing with a NetGear GS752TP POE switch with a cable length of 50ft and 250ft. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45524 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934xFelix Fietkau2015-04-202-0/+27
| | | | | | | | | | | | | | | The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45523 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add mask and shift for RXD/RDV bits in AR934X register fileFelix Fietkau2015-04-201-1/+5
| | | | | | | | | | | | | The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X register file") introduced definitions for some bits in the RDV/RXD part of the ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit only specified the lower bits. The upper bits also have to be unset when the lower bits should only be set. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45522 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Remove TX/RX delay from pll_1000 for OM5P-ANFelix Fietkau2015-04-201-1/+1
| | | | | | | | | | The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by: Sven Eckelmann <sven@open-mesh.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45521 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)Felix Fietkau2015-04-191-325/+45
| | | | | | | | | Profile definitions need to be checked and fixed before this patch can be applied again. Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45511 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: remove duplicated rootfs in new tplink initramfs imagesJohn Crispin2015-04-181-4/+14
| | | | | | | | | | The new building code included the rootfs twice when building tplink initramfs images. To make it more readable move initramfs into an own build step Build/mktplinkfw-initramfs. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45491 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: move TPLINK-LZMA image to new build codeJohn Crispin2015-04-181-45/+325
| | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45490 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: add template tplink-16mlzmaJohn Crispin2015-04-181-0/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45489 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/image: fix imagesize of template tplink-8mlzmaJohn Crispin2015-04-181-1/+1
| | | | | | | | | The new image size is verified by a running tplink device and checked against mktplinkfw source code. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45488 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Enable AT803X_PHY to set special flagsJohn Crispin2015-04-141-0/+1
| | | | | | | | | | | Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY requires special flags to work correctly. Otherwise massive packet loss happens with active POE or when switching the link speed from gigabit ethernet to fast ethernet. The generic PHY doesn't have support to change these settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45439 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix ethernet packet loss issues on OM5P-ANJohn Crispin2015-04-141-1/+21
| | | | | | | | | | | | | | | The OM5P-AN boards are suffering from ethernet packet loss when booting with some active POE setups or when switching to Fast Ethernet when previously booted with Gigabit ethernet attached. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV delay in the ETH_CFG register to fix the issue. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45438 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable LEDs on Hornet-UB X2John Crispin2015-04-092-2/+4
| | | | | | | | | | | None of the LEDs are enabled by default on the Hornet-UB X2 board (the 16/64MB version of the Hornet-UB), because it uses a different board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards are equivalent WRT their LEDs. SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patchesGabor Juhos2015-04-081-1/+1
| | | | | | | | Those don't exist anymore. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45314 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for RB911G-5HPacDGabor Juhos2015-04-074-0/+50
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45300 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add initial support for RB911G-5HPacDGabor Juhos2015-04-074-0/+289
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45299 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: routerboot: export extended wlan data via sysfsGabor Juhos2015-04-071-0/+58
| | | | | | | | Export the data to make it accessible from user-space. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45298 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: routerboot: add support for extended radio dataGabor Juhos2015-04-074-8/+67
| | | | | | | | | | | | | On newer Mikrotik boards, the radio calibration data is stored differently and uses LZO compression instead of RLE. Update the RouterBOOT helper code to support the new format. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45297 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: select RLE_DECOMPRESS directly by the RouterBOOT helper codeGabor Juhos2015-04-074-15/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45296 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were ↵Felix Fietkau2015-04-061-2/+2
| | | | | | | | swapped (fixes #19400) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45281 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix platform device support in the gpio-74x164 driverGabor Juhos2015-03-311-2/+43
| | | | | | | | | Platform device support has been removed from the gpio-74x164 driver in 3.14. Restore that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45203 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: disable atnoher two non MikroTik boardsGabor Juhos2015-03-311-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45177 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: disable non MikroTik boardsGabor Juhos2015-03-311-0/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45176 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx/mikrotik: use correct symbol to disable overlayfsGabor Juhos2015-03-311-1/+1
| | | | | | | | The Kconfig symbol has been changed in 3.18. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45175 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 07:53:44 +0000