aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.John Crispin2014-10-201-1/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42992 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add comments for Image/BuildLoader{, Alone}.John Crispin2014-10-201-0/+17
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42990 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable irq on reboot to fix hang issues (fixes #17839)Felix Fietkau2014-10-182-0/+20
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42955 3c298f89-4303-0410-b956-a3cf2f4a3e73
* wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILLJohn Crispin2014-10-141-4/+4
| | | | | | | | | | | | This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2 from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason for this change is, that the KEY_WIFI button code is not recognized by the hotplug subsystem. This means that the userspace is not notified about the button being pressed which effectively renders it useless. Signed-off-by: Josef Gajdusek <atx@atx.name> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix seama factory type image generation.John Crispin2014-10-141-2/+4
| | | | | | | | | | | Currently JFFS2 end-of-filesystem marker 0xdeadc0de is included the computation of image's MD5 checksum as part of the seama header. But OpenWrt will erase blocks including and after the marker thus invalidating the checksum after the first boot. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.John Crispin2014-10-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | Qihoo C301 has 2 flash chips of which one is used as primary and the other is used as backup. OEM U-Boot will try to boot an activeregion N with imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region is found, bootloader will try to increment imageNtrynum and boot it. This patch tries to reset imageNtrynum after each successful boot (if the boot process reaches the execution of /etc/init.d/done). root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9 00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e |..c.activeregion| 00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d |=1.image1status=| 00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 |0.image2status=0| 00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 |.image2trynum=0.| 00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d |imagemaxtry=3.im| 00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 |age1trynum=0....| 00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* scripts: fix wrong usage of '==' operatorJohn Crispin2014-10-142-3/+3
| | | | | | | | | | | | | | [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix LED definitions for the DRAGINO2 boardJohn Crispin2014-10-143-17/+35
| | | | | | | | | | | | | | This patch fixes LED definitions for the DRAGINO2 board. 1. It renames the Router/USB led to System, as it is now marked "SYS" on the board. 2. It gives control of the LAN and WAN leds and some other GPIOs to Linux. 3. It fixes the active_low property for the LAN and WAN leds. 4. It sets up WLAN, LAN and WAN leds in the UCI defaults. 5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42897 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7John Crispin2014-10-061-0/+7
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42797 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detectionJohn Crispin2014-10-061-1/+1
| | | | | | | | [ ] conditions should use = instead of == for string equality. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42796 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: simplify TP-LINK model detectionJohn Crispin2014-10-061-5/+1
| | | | | | | | | | All TP-LINK machine names begin with "TP-LINK", so there's no need to check for more specific model names. This also allows adding new models like the Archer series more easily. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42795 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)John Crispin2014-10-061-1/+2
| | | | | | Signed-off-by: Jaehoon You <teslamint@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42792 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add LED defaults for the EnGenius ESR1750John Crispin2014-10-061-0/+5
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42786 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix reset button gpio for OM2P/OM2P-HSJohn Crispin2014-10-061-1/+1
| | | | | | | | | | | A typo in the definition for the OM2P reset button disabled its functionality in OpenWrt. The actual button for these two devices is "1" and not "11". Signed-off-by: Oren Poleg <oren@poleg.org> [sven@open-mesh.org: added a commit subject+message] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42782 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: revert accidental kernel upgradeFelix Fietkau2014-09-271-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42687 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add wmac callback for reading soc revision on ar934xFelix Fietkau2014-09-272-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42685 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh 3.14 kernel patchesFelix Fietkau2014-09-276-56/+54
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42684 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add qihoo 360 c301 router supportJohn Crispin2014-09-1515-2/+300
| | | | | | | | | | | | | | | Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42552 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add board support for ubnt loco m xwJohn Crispin2014-09-158-13/+30
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42549 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refactor ubnt xw board setupJohn Crispin2014-09-151-8/+20
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42548 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: ack completed tx descriptors only after the full frame has been ↵Felix Fietkau2014-09-101-10/+16
| | | | | | | | completed Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331Felix Fietkau2014-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | While the AR9331 has a gigabit MAC towards the internal switch, the integrated PHYs however are only 100-base-tx capable. The existing code however advertieses gigabit capability in the link status word. If you attach such a PHY to a gigabit capable switch on the remote end, with some probability it attempts to negotiate gigabit and fails, falling baco to the AR9331 assuming a 10mbit half-duplex link. This has been observed quite frequently with the Carambola2 and gigabit capable switches. In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally for both AR9331 ethernet ports. This is most likely wrong. Despite the two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a 100base-T PHY via MII. The has_gbit attribute is used in the ethernet driver to determine the supported link modes. So either pdata->has_gbit is not set to 1 anymore, or the ethernet driver needs to be modified to determine the advertised link code word on another criteria than pdata->has_gbit. This patch implements the former solution. Signed-off-by: Harald Welte <laforge@gnumonks.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42432 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes ↵Felix Fietkau2014-09-061-2/+0
| | | | | | | | (#13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42429 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)Felix Fietkau2014-09-061-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42428 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 ↵Felix Fietkau2014-09-061-1/+1
| | | | | | | | (improves performance) (patch from #13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42427 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: disable ethernet descriptor splitting for now, as it seems to cause ↵Felix Fietkau2014-08-301-0/+2
| | | | | | | | tx hangs in some setups Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42333 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: select m25p80 support instead of spi support where used by mach ↵Felix Fietkau2014-08-298-18/+22
| | | | | | | | files (#17699) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42331 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: split packets into multiple descriptors on ar716xFelix Fietkau2014-08-293-28/+105
| | | | | | | | | | | This improves performance when doing concurrent rx/tx on a single ethernet MAC, e.g. when routing between VLANs. Fixes #13072 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42328 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Support for RB2011UiAS-2HnDJohn Crispin2014-08-284-3/+34
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42317 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: use ETH_ALEN for consistencyJohn Crispin2014-08-251-3/+3
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42280 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the EnGenius ESR900John Crispin2014-08-251-0/+1
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42279 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMACJohn Crispin2014-08-181-3/+1
| | | | | | | | | | | | This sets the MAC address of the WLAN interface to the "official" primary MAC address (the one on the label under the devices, and the one used with the stock firmware). The MAC address used so far (primary-1) isn't even used at all with the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the WAN interface (like OpenWrt does with this patch). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42193 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build factory image for EnGenius ESR900 and ESR1750John Crispin2014-08-181-1/+24
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42189 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 boardJohn Crispin2014-08-181-0/+1
| | | | | | | | | | The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the mini-PCIe device. Not configuring the LED pin inside the platform data makes it impossible to configure it through any standard OpenWrt tool. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42184 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 ↵John Crispin2014-08-181-1/+1
| | | | | | | | since they have the same flash layout Signed-off-by: Forest Crossman <cyrozap@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42177 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: add support for the NC-LINK SMART-300Imre Kaloz2014-08-1113-0/+251
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: port missing ath79 machine entry for wndr3700 v4 to 3.14Felix Fietkau2014-08-071-2/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42044 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add linux 3.14 supportFelix Fietkau2014-08-07107-6/+8984
| | | | | | | Signed-off-by: Zhao, Gang <gang.zhao.42@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42038 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for the WNDR3800CHSteven Barth2014-08-071-1/+2
| | | | | | | | | Apparently this is a fairly common refurb unit of the 3800 series now, with merely the recognition string changed in the boot loader. Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42023 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: update Carambola2 platform dataFelix Fietkau2014-08-042-10/+1
| | | | | | | | | | | | Change list: * Remove button info on GPIO12, there is no button there. * Remove nvram mtd partition, as it's not used for anything, saves 64k for user data. Tested building for carambola2 target. Signed-off-by: Mantas Pucka <mantas@8devices.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41993 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: oolite: the buttons are not active_lowJohn Crispin2014-08-011-3/+3
| | | | | | | | | this caused factory resets when reboot was pressed Signed-off-by: Brent Thomson <brentthomson@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41932 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add RTC feature flag to ar71xx/nandJohn Crispin2014-08-011-1/+1
| | | | | | | | | | without this the build for NBG6716 fails due to missing packages https://dev.openwrt.org/ticket/17325 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41930 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: add support for the archer c5Imre Kaloz2014-07-2311-4/+44
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: refresh patchesImre Kaloz2014-07-231-23/+15
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41812 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix LED configuration for HiWiFi-HC6361.John Crispin2014-07-231-1/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WAN MAC setup on dir-825-c1John Crispin2014-07-211-1/+1
| | | | | | | | Changeset 38690 broke the WAN MAC setup. Here's the fix. Signed-off-by: Sebastian Kemper <sebastian_ml <at> gmx.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41795 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Register reset button on UBNT AirGWJohn Crispin2014-07-211-1/+16
| | | | | | | | The airGateway has a reset button connected to GPIO 12, so we should use it. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41794 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix GL.iNet WLAN LEDJohn Crispin2014-07-211-1/+1
| | | | | | | | LED script expects WLAN LED to be "gl-connect:red:wlan". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41793 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machinesJohn Crispin2014-07-2110-19/+40
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41788 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh 3.10 patchesJohn Crispin2014-07-203-9/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41777 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:31:03 +0000