aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/config-4.1
Commit message (Collapse)AuthorAgeFilesLines
* V2 ar71xx : Add Support for the Bitmain Antrouter R1John Crispin2016-01-011-0/+1
| | | | | | | | | | This patch adds support for the Bitmain Antrouter R1 http://wiki.openwrt.org/toh/bitmain/r1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48058 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AirTight Networks C-55John Crispin2015-12-231-0/+1
| | | | | | | | This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Kernel board definition for PowerCloud CR5000Felix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | Kernel part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64 MB RAM, (unused in stock firmware) USB 2.0 port, and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47940 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Kernel board definition for PowerCloud CR3000Felix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | Kernel part of support for PowerCloud CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port fast ethernet switch, and a fast ethernet wan port which was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Kernel board definition for PowerCloud CAP324Felix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | | | | Kernel part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP was a device sold by PowerCloud Systems as hardware for the CloudCommand service for 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a power adaptor. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47938 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TRENDnet TEW-823DRUJohn Crispin2015-12-171-0/+1
| | | | | | | | | | | | | | Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Cisco's MR18John Crispin2015-12-121-0/+1
| | | | | | | | | | | This patch adds support for Cisco's MR18. Detailed instructions for the flashing the device can be found in the OpenWrt forum thread: <https://forum.openwrt.org/viewtopic.php?id=59248> Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47878 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Wallys DR344John Crispin2015-12-111-0/+1
| | | | | | | | This patch is for Wallys DR344 support under OpenWRT Signed-off-by: Philippe Duchein <wireless-dev@duchein.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-Domino Pi support V3John Crispin2015-11-241-0/+1
| | | | | | | | This is the patch for GL-Domino Pi V3. Updated against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47622 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR300 support V3John Crispin2015-11-241-0/+1
| | | | | | | | This is the patch for GL-AR300 V3, tested against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add GL-AR150 support V3John Crispin2015-11-241-0/+1
| | | | | | | | This is the 3rd version. Modified against the latest trunk. Signed-off-by: alzhao<alzhao@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47620 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-211-0/+1
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47554 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Arduino YunHauke Mehrtens2015-11-101-1/+4
| | | | | | | | | | | | | | | | | | | | This is based on patches from Federico Fissore <f.fissore@arduino.cc> especially this one: https://github.com/arduino/openwrt-yun/commit/7e2976fa83fb0d72a955574499178c387a1b3c92 The console is running with 250000 baud which is a non standard baud rate and needs an extra patch to be applied, I will try to get this patch upstream or something else which accomplish the same. Some upstream code looks like there are many different versions of this SoC, are these only internal versions and all versions on the consumer market are the same? I saw different GPIO configuration and flash sizes of 8MB and 16MB? Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47451 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)Felix Fietkau2015-11-081-0/+1
| | | | | | | | | | | | | | | The international version is completely different from the already supported Chinese version. The WLAN of the QCA956x SoC used by this router has been fixed in r46948. This patch looks like it changes a lot in 700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately, quilt decided to completely reorganize the Kconfig patch even though only a single section has been added. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47420 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add Gainstrong MiniBox v1.0 support to trunkJohn Crispin2015-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supersedes the v1 from September 17th. Bumping the patch version - the MiniBox profile showed up under M, but since it's called 'Gainstrong MiniBox v1.0' now it looks out of place. Renamed the profile to gs-minibox-v1.mk to fix that. The following patch adds support for the Gainstrong MiniBox into trunk (or 'Designated Driver' :D ). Fixed items: - Inverted LED polarity (OOLITE seems to suffer from the same problem). - Changed uppercase MINIBOX_V1_ prefix as requested. - Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor). - Mention the vendor (Gainstrong) in code headers. Compiles fine, has been confirmed working by owners on 15.05. Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c, the MiniBox images build fine without, so I'm wondering: do I need to add it in there as well? Any added benefit? Thank you Signed-off by: Stijn Segers <francesco.borromini@inventati.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47234 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add WeIO Board SupportFelix Fietkau2015-09-241-0/+1
| | | | | | | | | | Add support for WeIO board (http://we-io.net). This board is based on Carambola2 board form 8Devices. Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [some cleanups] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47036 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for ap152 reference boardJohn Crispin2015-09-161-0/+1
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add TP-LINK TL-WDR3320 v2 supportJohn Crispin2015-09-141-0/+1
| | | | | | | | | | This patch adds support for TP-LINK TL-WDR3320 v2. This router uses a chinese version 2 firmware header,. Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh MR1750 boardJohn Crispin2015-09-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46926 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add CONFIG_MIPS_CDMM config optionHauke Mehrtens2015-09-111-1/+0
| | | | | | | | | This driver was added in kernel 4.1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46881 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target: ar71xx: add support for COMFAST CF-E316N v2 boardFelix Fietkau2015-09-111-0/+1
| | | | | | | | | | | | This adds full support (sans sysupgrading from vendor firmware) for the COMFAST CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is actively refusing to provide GPL'd sources for the OpenWrt version they ship with the device, damn them). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46852 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-171-0/+1
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-171-0/+1
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+1
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46458 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for AP147-010 reference boardJohn Crispin2015-07-241-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46457 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh kernel configFelix Fietkau2015-07-221-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46438 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh kernel configFelix Fietkau2015-07-191-8/+19
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46429 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add 4.1 supportFelix Fietkau2015-07-191-0/+336
Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46426 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-11 13:06:14 +0000