aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: rssi leds for My Net WiFi Range ExtenderGabor Juhos2013-11-291-0/+1
| | | | | | | | | | | | The device has three extra LEDs which indicate the quality of the wireless link. Thanks to rssileds, this feature now works out of the box. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4462/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38950 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-292-5/+9
| | | | | | | | | | | | | | | | | | | | This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38949 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: add F1E specific feature bit definitions to AR934X register fileGabor Juhos2013-11-291-1/+3
| | | | | | | | | | | | | | | | The F1E Phy (AR8035?) requires additional bits to be set in order to provide a fast and reliable connection over gigabit links. When enabled, the link doesn't suffer anymore from a small package loss under load and the performance is improved quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4460/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38948 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: user space support update tl-wr842n_v2 add default led supportGabor Juhos2013-11-291-1/+10
| | | | | | | | | | Small update to uci_defaults/01_leds, to support the usb led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38947 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Kernel support update tl-wr842n_v2 added missing usb ledGabor Juhos2013-11-291-1/+1
| | | | | | | | | | | Just a small oversight my part, added the support for the USB led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38946 3c298f89-4303-0410-b956-a3cf2f4a3e73
* FPU type should not interfere with the ABI selection.Imre Kaloz2013-11-294-5/+12
| | | | | | | | | | Also make sure we either do real soft-float or hard-float on ARM, with the right options. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38943 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: tunr on some additional featuresImre Kaloz2013-11-291-1/+1
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38942 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ignore the fpu if we're doing soft-floatImre Kaloz2013-11-291-2/+4
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38941 3c298f89-4303-0410-b956-a3cf2f4a3e73
* there's no such thing as a soft fpu, this target should be fine without theseImre Kaloz2013-11-292-2/+0
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38940 3c298f89-4303-0410-b956-a3cf2f4a3e73
* enable using soft-float regardless of having a fpuImre Kaloz2013-11-291-2/+2
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38939 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: fix handling of uci lists, prevent shell code injection from uci ↵Jo-Philipp Wich2013-11-281-2/+2
| | | | | | values (#14548) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38938 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "ubox: the validation code has problems with the "(" char. use string ↵Jo-Philipp Wich2013-11-281-1/+1
| | | | | | | | for now" This reverts commit f7c2ac3ea9b5f2dc4ef4ce4ef195de8a4ac5546b. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38937 3c298f89-4303-0410-b956-a3cf2f4a3e73
* busybox: do not abort sysntpd init if enable_server is unset, that variable ↵Jo-Philipp Wich2013-11-281-1/+1
| | | | | | just controls the server part for relaying NTP git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38936 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: fix processing of datatype specification with spacesJo-Philipp Wich2013-11-281-2/+2
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38935 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: initialize wl12xx from the device treeImre Kaloz2013-11-271-0/+78
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38934 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add device tree based initialization to wl12xxImre Kaloz2013-11-2718-1/+2016
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38933 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: refresh/rename patchesImre Kaloz2013-11-2749-373/+118
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38932 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [omap]: fix gpio interrupt-cells property on AM335xImre Kaloz2013-11-271-0/+57
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38931 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.12]: refresh patchImre Kaloz2013-11-271-4/+3
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38930 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.12]: make the wl12xx glue code available with compat-wireless, tooImre Kaloz2013-11-271-0/+15
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38929 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [generic/3.12]: add TI wireless symbols and enable the platform glue by defaultImre Kaloz2013-11-271-1/+6
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38928 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: include 802.11n support when wl12xx is selectedFelix Fietkau2013-11-271-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ath9k: merge initval updatesFelix Fietkau2013-11-279-38/+3037
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38926 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mac80211]: fix typo in wl128x firmware namesImre Kaloz2013-11-271-3/+3
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38925 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-omap]: hide package, it's needed all the timeImre Kaloz2013-11-261-0/+1
| | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38924 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [uboot-omap]: use plain image names inside the target directoriesImre Kaloz2013-11-261-2/+2
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38923 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [toolchain/gcc]: upgrade Linaro GCC 4.8 to 4.8-2013.11Imre Kaloz2013-11-264-177/+9
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38922 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [mac80211]: wl12xx could need the wl128x firmware files, tooImre Kaloz2013-11-261-1/+5
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38921 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mac80211: merge another round of upstream fixesFelix Fietkau2013-11-264-31/+584
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38918 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: dts fixesJohn Crispin2013-11-264-7/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38917 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: the validation code has problems with the "(" char. use string for nowJohn Crispin2013-11-261-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38916 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: add support for auto-channel selectionFelix Fietkau2013-11-253-6/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* hostapd: update to version 2013-11-20Felix Fietkau2013-11-2533-430/+224
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38914 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel/modules: snd-pcm-dmaengine only if CONFIG_SND_DMAENGINE_PCM is setJohn Crispin2013-11-251-2/+2
| | | | | | | Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus the module is not generated. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38913 3c298f89-4303-0410-b956-a3cf2f4a3e73
* tools/mpfr: add GNU sourceJohn Crispin2013-11-251-1/+2
| | | | | | | | | | | fixes https://dev.openwrt.org/ticket/14519 mpfr is available from GNU too see: https://gforge.inria.fr/forum/forum.php?forum_id=11263 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38912 3c298f89-4303-0410-b956-a3cf2f4a3e73
* pppd: Place plugin-specific options after `plugin name`.John Crispin2013-11-251-1/+1
| | | | | | | | | | | | | | | | | | | Before this patch, if we specify a plugin specific option through `pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd would quit with the following error in log. Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose' Wed Oct 9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose' Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5 Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are: This is due to the requirement that function add_option() should be called by the plugin_init() function first before pppd can parse those options. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add mac address detection for Asus RT-G32 b1John Crispin2013-11-251-1/+5
| | | | | | | | | http://patchwork.openwrt.org/patch/4463/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* base-files: allow users to delect debug level during bootJohn Crispin2013-11-255-11/+60
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38909 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: update procd.sh to make use of the new validate_data toolJohn Crispin2013-11-251-52/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38908 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: update the validate_data toolJohn Crispin2013-11-251-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38907 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ubox: fix typo that caused log_file to not be validated properlyJohn Crispin2013-11-251-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38906 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: fix up the mt7530 driver to work properly with gmac2John Crispin2013-11-251-6/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38905 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add LRO supportJohn Crispin2013-11-251-27/+84
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38904 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X familyJohn Crispin2013-11-251-57/+116
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38903 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ralink: set the mac addr via the dts fileJohn Crispin2013-11-2560-92/+232
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38902 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: include ext4 support by defaultLuka Perkov2013-11-241-0/+6
| | | | | | | | Several users reported that they would like this feature. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38901 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: kernel: add missing config optionLuka Perkov2013-11-241-0/+1
| | | | | | | | Buildbot found missing config option for target kirkwood. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38900 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [tools] cmake: upgrade to 2.8.12.1Luka Perkov2013-11-241-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38899 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: drop unnecessary argument from *_UBIFS_OPTS variablesLuka Perkov2013-11-232-3/+3
| | | | | | | | The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38898 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kirkwood: add support for iomega iconnectLuka Perkov2013-11-232-0/+18
| | | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38897 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 06:31:21 +0000