aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch')
-rw-r--r--target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch964
1 files changed, 964 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch
new file mode 100644
index 0000000000..805f28f323
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/156-dmaengine-Add-ADM-driver.patch
@@ -0,0 +1,964 @@
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v6,2/2] dmaengine: Add ADM driver
+From: Andy Gross <agross@codeaurora.org>
+X-Patchwork-Id: 6027351
+Message-Id: <1426571172-9711-3-git-send-email-agross@codeaurora.org>
+To: Vinod Koul <vinod.koul@intel.com>
+Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
+ Bjorn Andersson <bjorn.andersson@sonymobile.com>,
+ Andy Gross <agross@codeaurora.org>
+Date: Tue, 17 Mar 2015 00:46:12 -0500
+
+Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
+controller found in the MSM8x60 and IPQ/APQ8064 platforms.
+
+The ADM supports both memory to memory transactions and memory
+to/from peripheral device transactions. The controller also provides flow
+control capabilities for transactions to/from peripheral devices.
+
+The initial release of this driver supports slave transfers to/from peripherals
+and also incorporates CRCI (client rate control interface) flow control.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Reviewed-by: sricharan <sricharan@codeaurora.org>
+
+---
+drivers/dma/Kconfig | 10 +
+ drivers/dma/Makefile | 1 +
+ drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 911 insertions(+)
+ create mode 100644 drivers/dma/qcom_adm.c
+
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -558,4 +558,14 @@
+ config DMA_ENGINE_RAID
+ bool
+
++config QCOM_ADM
++ tristate "Qualcomm ADM support"
++ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
++ select DMA_ENGINE
++ select DMA_VIRTUAL_CHANNELS
++ ---help---
++ Enable support for the Qualcomm ADM DMA controller. This controller
++ provides DMA capabilities for both general purpose and on-chip
++ peripheral devices.
++
+ endif
+--- /dev/null
++++ b/drivers/dma/qcom_adm.c
+@@ -0,0 +1,900 @@
++/*
++ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/scatterlist.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/of_dma.h>
++#include <linux/reset.h>
++#include <linux/clk.h>
++#include <linux/dmaengine.h>
++
++#include "dmaengine.h"
++#include "virt-dma.h"
++
++/* ADM registers - calculated from channel number and security domain */
++#define ADM_CHAN_MULTI 0x4
++#define ADM_CI_MULTI 0x4
++#define ADM_CRCI_MULTI 0x4
++#define ADM_EE_MULTI 0x800
++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
++#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
++#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
++#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
++#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
++#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
++#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
++#define ADM_GP_CTL 0x3d8
++#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
++ ADM_EE_OFFS(ee))
++
++/* channel status */
++#define ADM_CH_STATUS_VALID BIT(1)
++
++/* channel result */
++#define ADM_CH_RSLT_VALID BIT(31)
++#define ADM_CH_RSLT_ERR BIT(3)
++#define ADM_CH_RSLT_FLUSH BIT(2)
++#define ADM_CH_RSLT_TPD BIT(1)
++
++/* channel conf */
++#define ADM_CH_CONF_SHADOW_EN BIT(12)
++#define ADM_CH_CONF_MPU_DISABLE BIT(11)
++#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
++#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
++#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
++
++/* channel result conf */
++#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
++#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
++
++/* CRCI CTL */
++#define ADM_CRCI_CTL_MUX_SEL BIT(18)
++#define ADM_CRCI_CTL_RST BIT(17)
++
++/* CI configuration */
++#define ADM_CI_RANGE_END(x) (x << 24)
++#define ADM_CI_RANGE_START(x) (x << 16)
++#define ADM_CI_BURST_4_WORDS BIT(2)
++#define ADM_CI_BURST_8_WORDS BIT(3)
++
++/* GP CTL */
++#define ADM_GP_CTL_LP_EN BIT(12)
++#define ADM_GP_CTL_LP_CNT(x) (x << 8)
++
++/* Command pointer list entry */
++#define ADM_CPLE_LP BIT(31)
++#define ADM_CPLE_CMD_PTR_LIST BIT(29)
++
++/* Command list entry */
++#define ADM_CMD_LC BIT(31)
++#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
++#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
++
++#define ADM_CMD_TYPE_SINGLE 0x0
++#define ADM_CMD_TYPE_BOX 0x3
++
++#define ADM_CRCI_MUX_SEL BIT(4)
++#define ADM_DESC_ALIGN 8
++#define ADM_MAX_XFER (SZ_64K-1)
++#define ADM_MAX_ROWS (SZ_64K-1)
++#define ADM_MAX_CHANNELS 16
++
++struct adm_desc_hw_box {
++ u32 cmd;
++ u32 src_addr;
++ u32 dst_addr;
++ u32 row_len;
++ u32 num_rows;
++ u32 row_offset;
++};
++
++struct adm_desc_hw_single {
++ u32 cmd;
++ u32 src_addr;
++ u32 dst_addr;
++ u32 len;
++};
++
++struct adm_async_desc {
++ struct virt_dma_desc vd;
++ struct adm_device *adev;
++
++ size_t length;
++ enum dma_transfer_direction dir;
++ dma_addr_t dma_addr;
++ size_t dma_len;
++
++ void *cpl;
++ dma_addr_t cp_addr;
++ u32 crci;
++ u32 mux;
++ u32 blk_size;
++};
++
++struct adm_chan {
++ struct virt_dma_chan vc;
++ struct adm_device *adev;
++
++ /* parsed from DT */
++ u32 id; /* channel id */
++
++ struct adm_async_desc *curr_txd;
++ struct dma_slave_config slave;
++ struct list_head node;
++
++ int error;
++ int initialized;
++};
++
++static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
++{
++ return container_of(common, struct adm_chan, vc.chan);
++}
++
++struct adm_device {
++ void __iomem *regs;
++ struct device *dev;
++ struct dma_device common;
++ struct device_dma_parameters dma_parms;
++ struct adm_chan *channels;
++
++ u32 ee;
++
++ struct clk *core_clk;
++ struct clk *iface_clk;
++
++ struct reset_control *clk_reset;
++ struct reset_control *c0_reset;
++ struct reset_control *c1_reset;
++ struct reset_control *c2_reset;
++ int irq;
++};
++
++/**
++ * adm_free_chan - Frees dma resources associated with the specific channel
++ *
++ * Free all allocated descriptors associated with this channel
++ *
++ */
++static void adm_free_chan(struct dma_chan *chan)
++{
++ /* free all queued descriptors */
++ vchan_free_chan_resources(to_virt_chan(chan));
++}
++
++/**
++ * adm_get_blksize - Get block size from burst value
++ *
++ */
++static int adm_get_blksize(unsigned int burst)
++{
++ int ret;
++
++ switch (burst) {
++ case 16:
++ case 32:
++ case 64:
++ case 128:
++ ret = ffs(burst>>4) - 1;
++ break;
++ case 192:
++ ret = 4;
++ break;
++ case 256:
++ ret = 5;
++ break;
++ default:
++ ret = -EINVAL;
++ break;
++ }
++
++ return ret;
++}
++
++/**
++ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
++ *
++ * @achan: ADM channel
++ * @desc: Descriptor memory pointer
++ * @sg: Scatterlist entry
++ * @crci: CRCI value
++ * @burst: Burst size of transaction
++ * @direction: DMA transfer direction
++ */
++static void *adm_process_fc_descriptors(struct adm_chan *achan,
++ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
++ enum dma_transfer_direction direction)
++{
++ struct adm_desc_hw_box *box_desc = NULL;
++ struct adm_desc_hw_single *single_desc;
++ u32 remainder = sg_dma_len(sg);
++ u32 rows, row_offset, crci_cmd;
++ u32 mem_addr = sg_dma_address(sg);
++ u32 *incr_addr = &mem_addr;
++ u32 *src, *dst;
++
++ if (direction == DMA_DEV_TO_MEM) {
++ crci_cmd = ADM_CMD_SRC_CRCI(crci);
++ row_offset = burst;
++ src = &achan->slave.src_addr;
++ dst = &mem_addr;
++ } else {
++ crci_cmd = ADM_CMD_DST_CRCI(crci);
++ row_offset = burst << 16;
++ src = &mem_addr;
++ dst = &achan->slave.dst_addr;
++ }
++
++ while (remainder >= burst) {
++ box_desc = desc;
++ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
++ box_desc->row_offset = row_offset;
++ box_desc->src_addr = *src;
++ box_desc->dst_addr = *dst;
++
++ rows = remainder / burst;
++ rows = min_t(u32, rows, ADM_MAX_ROWS);
++ box_desc->num_rows = rows << 16 | rows;
++ box_desc->row_len = burst << 16 | burst;
++
++ *incr_addr += burst * rows;
++ remainder -= burst * rows;
++ desc += sizeof(*box_desc);
++ }
++
++ /* if leftover bytes, do one single descriptor */
++ if (remainder) {
++ single_desc = desc;
++ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
++ single_desc->len = remainder;
++ single_desc->src_addr = *src;
++ single_desc->dst_addr = *dst;
++ desc += sizeof(*single_desc);
++
++ if (sg_is_last(sg))
++ single_desc->cmd |= ADM_CMD_LC;
++ } else {
++ if (box_desc && sg_is_last(sg))
++ box_desc->cmd |= ADM_CMD_LC;
++ }
++
++ return desc;
++}
++
++/**
++ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
++ *
++ * @achan: ADM channel
++ * @desc: Descriptor memory pointer
++ * @sg: Scatterlist entry
++ * @direction: DMA transfer direction
++ */
++static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
++ void *desc, struct scatterlist *sg,
++ enum dma_transfer_direction direction)
++{
++ struct adm_desc_hw_single *single_desc;
++ u32 remainder = sg_dma_len(sg);
++ u32 mem_addr = sg_dma_address(sg);
++ u32 *incr_addr = &mem_addr;
++ u32 *src, *dst;
++
++ if (direction == DMA_DEV_TO_MEM) {
++ src = &achan->slave.src_addr;
++ dst = &mem_addr;
++ } else {
++ src = &mem_addr;
++ dst = &achan->slave.dst_addr;
++ }
++
++ do {
++ single_desc = desc;
++ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
++ single_desc->src_addr = *src;
++ single_desc->dst_addr = *dst;
++ single_desc->len = (remainder > ADM_MAX_XFER) ?
++ ADM_MAX_XFER : remainder;
++
++ remainder -= single_desc->len;
++ *incr_addr += single_desc->len;
++ desc += sizeof(*single_desc);
++ } while (remainder);
++
++ /* set last command if this is the end of the whole transaction */
++ if (sg_is_last(sg))
++ single_desc->cmd |= ADM_CMD_LC;
++
++ return desc;
++}
++
++/**
++ * adm_prep_slave_sg - Prep slave sg transaction
++ *
++ * @chan: dma channel
++ * @sgl: scatter gather list
++ * @sg_len: length of sg
++ * @direction: DMA transfer direction
++ * @flags: DMA flags
++ * @context: transfer context (unused)
++ */
++static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
++ struct scatterlist *sgl, unsigned int sg_len,
++ enum dma_transfer_direction direction, unsigned long flags,
++ void *context)
++{
++ struct adm_chan *achan = to_adm_chan(chan);
++ struct adm_device *adev = achan->adev;
++ struct adm_async_desc *async_desc;
++ struct scatterlist *sg;
++ u32 i, burst;
++ u32 single_count = 0, box_count = 0, crci = 0;
++ void *desc;
++ u32 *cple;
++ int blk_size = 0;
++
++ if (!is_slave_direction(direction)) {
++ dev_err(adev->dev, "invalid dma direction\n");
++ return NULL;
++ }
++
++ /*
++ * get burst value from slave configuration
++ */
++ burst = (direction == DMA_MEM_TO_DEV) ?
++ achan->slave.dst_maxburst :
++ achan->slave.src_maxburst;
++
++ /* if using flow control, validate burst and crci values */
++ if (achan->slave.device_fc) {
++
++ blk_size = adm_get_blksize(burst);
++ if (blk_size < 0) {
++ dev_err(adev->dev, "invalid burst value: %d\n",
++ burst);
++ return ERR_PTR(-EINVAL);
++ }
++
++ crci = achan->slave.slave_id & 0xf;
++ if (!crci || achan->slave.slave_id > 0x1f) {
++ dev_err(adev->dev, "invalid crci value\n");
++ return ERR_PTR(-EINVAL);
++ }
++ }
++
++ /* iterate through sgs and compute allocation size of structures */
++ for_each_sg(sgl, sg, sg_len, i) {
++ if (achan->slave.device_fc) {
++ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
++ ADM_MAX_ROWS);
++ if (sg_dma_len(sg) % burst)
++ single_count++;
++ } else {
++ single_count += DIV_ROUND_UP(sg_dma_len(sg),
++ ADM_MAX_XFER);
++ }
++ }
++
++ async_desc = kzalloc(sizeof(*async_desc), GFP_NOWAIT);
++ if (!async_desc)
++ return ERR_PTR(-ENOMEM);
++
++ if (crci)
++ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
++ ADM_CRCI_CTL_MUX_SEL : 0;
++ async_desc->crci = crci;
++ async_desc->blk_size = blk_size;
++ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
++ box_count * sizeof(struct adm_desc_hw_box) +
++ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
++
++ async_desc->cpl = dma_alloc_writecombine(adev->dev, async_desc->dma_len,
++ &async_desc->dma_addr, GFP_NOWAIT);
++
++ if (!async_desc->cpl) {
++ kfree(async_desc);
++ return ERR_PTR(-ENOMEM);
++ }
++
++ async_desc->adev = adev;
++
++ /* both command list entry and descriptors must be 8 byte aligned */
++ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
++ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
++
++ /* init cmd list */
++ *cple = ADM_CPLE_LP;
++ *cple |= (desc - async_desc->cpl + async_desc->dma_addr) >> 3;
++
++ for_each_sg(sgl, sg, sg_len, i) {
++ async_desc->length += sg_dma_len(sg);
++
++ if (achan->slave.device_fc)
++ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
++ burst, direction);
++ else
++ desc = adm_process_non_fc_descriptors(achan, desc, sg,
++ direction);
++ }
++
++ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
++}
++
++/**
++ * adm_terminate_all - terminate all transactions on a channel
++ * @achan: adm dma channel
++ *
++ * Dequeues and frees all transactions, aborts current transaction
++ * No callbacks are done
++ *
++ */
++static int adm_terminate_all(struct dma_chan *chan)
++{
++ struct adm_chan *achan = to_adm_chan(chan);
++ struct adm_device *adev = achan->adev;
++ unsigned long flags;
++ LIST_HEAD(head);
++
++ spin_lock_irqsave(&achan->vc.lock, flags);
++ vchan_get_all_descriptors(&achan->vc, &head);
++
++ /* send flush command to terminate current transaction */
++ writel_relaxed(0x0,
++ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
++
++ spin_unlock_irqrestore(&achan->vc.lock, flags);
++
++ vchan_dma_desc_free_list(&achan->vc, &head);
++
++ return 0;
++}
++
++static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
++{
++ struct adm_chan *achan = to_adm_chan(chan);
++ unsigned long flag;
++
++ spin_lock_irqsave(&achan->vc.lock, flag);
++ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
++ spin_unlock_irqrestore(&achan->vc.lock, flag);
++
++ return 0;
++}
++
++/**
++ * adm_start_dma - start next transaction
++ * @achan - ADM dma channel
++ */
++static void adm_start_dma(struct adm_chan *achan)
++{
++ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
++ struct adm_device *adev = achan->adev;
++ struct adm_async_desc *async_desc;
++
++ lockdep_assert_held(&achan->vc.lock);
++
++ if (!vd)
++ return;
++
++ list_del(&vd->node);
++
++ /* write next command list out to the CMD FIFO */
++ async_desc = container_of(vd, struct adm_async_desc, vd);
++ achan->curr_txd = async_desc;
++
++ /* reset channel error */
++ achan->error = 0;
++
++ if (!achan->initialized) {
++ /* enable interrupts */
++ writel(ADM_CH_CONF_SHADOW_EN |
++ ADM_CH_CONF_PERM_MPU_CONF |
++ ADM_CH_CONF_MPU_DISABLE |
++ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
++ adev->regs + ADM_CH_CONF(achan->id));
++
++ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
++ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
++
++ achan->initialized = 1;
++ }
++
++ /* set the crci block size if this transaction requires CRCI */
++ if (async_desc->crci) {
++ writel(async_desc->mux | async_desc->blk_size,
++ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
++ }
++
++ /* make sure IRQ enable doesn't get reordered */
++ wmb();
++
++ /* write next command list out to the CMD FIFO */
++ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
++ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
++}
++
++/**
++ * adm_dma_irq - irq handler for ADM controller
++ * @irq: IRQ of interrupt
++ * @data: callback data
++ *
++ * IRQ handler for the bam controller
++ */
++static irqreturn_t adm_dma_irq(int irq, void *data)
++{
++ struct adm_device *adev = data;
++ u32 srcs, i;
++ struct adm_async_desc *async_desc;
++ unsigned long flags;
++
++ srcs = readl_relaxed(adev->regs +
++ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
++
++ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
++ struct adm_chan *achan = &adev->channels[i];
++ u32 status, result;
++
++ if (srcs & BIT(i)) {
++ status = readl_relaxed(adev->regs +
++ ADM_CH_STATUS_SD(i, adev->ee));
++
++ /* if no result present, skip */
++ if (!(status & ADM_CH_STATUS_VALID))
++ continue;
++
++ result = readl_relaxed(adev->regs +
++ ADM_CH_RSLT(i, adev->ee));
++
++ /* no valid results, skip */
++ if (!(result & ADM_CH_RSLT_VALID))
++ continue;
++
++ /* flag error if transaction was flushed or failed */
++ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
++ achan->error = 1;
++
++ spin_lock_irqsave(&achan->vc.lock, flags);
++ async_desc = achan->curr_txd;
++
++ achan->curr_txd = NULL;
++
++ if (async_desc) {
++ vchan_cookie_complete(&async_desc->vd);
++
++ /* kick off next DMA */
++ adm_start_dma(achan);
++ }
++
++ spin_unlock_irqrestore(&achan->vc.lock, flags);
++ }
++ }
++
++ return IRQ_HANDLED;
++}
++
++/**
++ * adm_tx_status - returns status of transaction
++ * @chan: dma channel
++ * @cookie: transaction cookie
++ * @txstate: DMA transaction state
++ *
++ * Return status of dma transaction
++ */
++static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
++ struct dma_tx_state *txstate)
++{
++ struct adm_chan *achan = to_adm_chan(chan);
++ struct virt_dma_desc *vd;
++ enum dma_status ret;
++ unsigned long flags;
++ size_t residue = 0;
++
++ ret = dma_cookie_status(chan, cookie, txstate);
++ if (ret == DMA_COMPLETE || !txstate)
++ return ret;
++
++ spin_lock_irqsave(&achan->vc.lock, flags);
++
++ vd = vchan_find_desc(&achan->vc, cookie);
++ if (vd)
++ residue = container_of(vd, struct adm_async_desc, vd)->length;
++
++ spin_unlock_irqrestore(&achan->vc.lock, flags);
++
++ /*
++ * residue is either the full length if it is in the issued list, or 0
++ * if it is in progress. We have no reliable way of determining
++ * anything inbetween
++ */
++ dma_set_residue(txstate, residue);
++
++ if (achan->error)
++ return DMA_ERROR;
++
++ return ret;
++}
++
++/**
++ * adm_issue_pending - starts pending transactions
++ * @chan: dma channel
++ *
++ * Issues all pending transactions and starts DMA
++ */
++static void adm_issue_pending(struct dma_chan *chan)
++{
++ struct adm_chan *achan = to_adm_chan(chan);
++ unsigned long flags;
++
++ spin_lock_irqsave(&achan->vc.lock, flags);
++
++ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
++ adm_start_dma(achan);
++ spin_unlock_irqrestore(&achan->vc.lock, flags);
++}
++
++/**
++ * adm_dma_free_desc - free descriptor memory
++ * @vd: virtual descriptor
++ *
++ */
++static void adm_dma_free_desc(struct virt_dma_desc *vd)
++{
++ struct adm_async_desc *async_desc = container_of(vd,
++ struct adm_async_desc, vd);
++
++ dma_free_writecombine(async_desc->adev->dev, async_desc->dma_len,
++ async_desc->cpl, async_desc->dma_addr);
++ kfree(async_desc);
++}
++
++static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
++ u32 index)
++{
++ achan->id = index;
++ achan->adev = adev;
++
++ vchan_init(&achan->vc, &adev->common);
++ achan->vc.desc_free = adm_dma_free_desc;
++}
++
++static int adm_dma_probe(struct platform_device *pdev)
++{
++ struct adm_device *adev;
++ struct resource *iores;
++ int ret;
++ u32 i;
++
++ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
++ if (!adev)
++ return -ENOMEM;
++
++ adev->dev = &pdev->dev;
++
++ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
++ if (IS_ERR(adev->regs))
++ return PTR_ERR(adev->regs);
++
++ adev->irq = platform_get_irq(pdev, 0);
++ if (adev->irq < 0)
++ return adev->irq;
++
++ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
++ if (ret) {
++ dev_err(adev->dev, "Execution environment unspecified\n");
++ return ret;
++ }
++
++ adev->core_clk = devm_clk_get(adev->dev, "core");
++ if (IS_ERR(adev->core_clk))
++ return PTR_ERR(adev->core_clk);
++
++ ret = clk_prepare_enable(adev->core_clk);
++ if (ret) {
++ dev_err(adev->dev, "failed to prepare/enable core clock\n");
++ return ret;
++ }
++
++ adev->iface_clk = devm_clk_get(adev->dev, "iface");
++ if (IS_ERR(adev->iface_clk)) {
++ ret = PTR_ERR(adev->iface_clk);
++ goto err_disable_core_clk;
++ }
++
++ ret = clk_prepare_enable(adev->iface_clk);
++ if (ret) {
++ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
++ goto err_disable_core_clk;
++ }
++
++ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
++ if (IS_ERR(adev->clk_reset)) {
++ dev_err(adev->dev, "failed to get ADM0 reset\n");
++ ret = PTR_ERR(adev->clk_reset);
++ goto err_disable_clks;
++ }
++
++ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
++ if (IS_ERR(adev->c0_reset)) {
++ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
++ ret = PTR_ERR(adev->c0_reset);
++ goto err_disable_clks;
++ }
++
++ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
++ if (IS_ERR(adev->c1_reset)) {
++ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
++ ret = PTR_ERR(adev->c1_reset);
++ goto err_disable_clks;
++ }
++
++ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
++ if (IS_ERR(adev->c2_reset)) {
++ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
++ ret = PTR_ERR(adev->c2_reset);
++ goto err_disable_clks;
++ }
++
++ reset_control_assert(adev->clk_reset);
++ reset_control_assert(adev->c0_reset);
++ reset_control_assert(adev->c1_reset);
++ reset_control_assert(adev->c2_reset);
++
++ reset_control_deassert(adev->clk_reset);
++ reset_control_deassert(adev->c0_reset);
++ reset_control_deassert(adev->c1_reset);
++ reset_control_deassert(adev->c2_reset);
++
++ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
++ sizeof(*adev->channels), GFP_KERNEL);
++
++ if (!adev->channels) {
++ ret = -ENOMEM;
++ goto err_disable_clks;
++ }
++
++ /* allocate and initialize channels */
++ INIT_LIST_HEAD(&adev->common.channels);
++
++ for (i = 0; i < ADM_MAX_CHANNELS; i++)
++ adm_channel_init(adev, &adev->channels[i], i);
++
++ /* reset CRCIs */
++ for (i = 0; i < 16; i++)
++ writel(ADM_CRCI_CTL_RST, adev->regs +
++ ADM_CRCI_CTL(i, adev->ee));
++
++ /* configure client interfaces */
++ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
++ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
++ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
++ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
++ adev->regs + ADM_GP_CTL);
++
++ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
++ 0, "adm_dma", adev);
++ if (ret)
++ goto err_disable_clks;
++
++ platform_set_drvdata(pdev, adev);
++
++ adev->common.dev = adev->dev;
++ adev->common.dev->dma_parms = &adev->dma_parms;
++
++ /* set capabilities */
++ dma_cap_zero(adev->common.cap_mask);
++ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
++ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
++
++ /* initialize dmaengine apis */
++ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
++ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
++ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ adev->common.device_free_chan_resources = adm_free_chan;
++ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
++ adev->common.device_issue_pending = adm_issue_pending;
++ adev->common.device_tx_status = adm_tx_status;
++ adev->common.device_terminate_all = adm_terminate_all;
++ adev->common.device_config = adm_slave_config;
++
++ ret = dma_async_device_register(&adev->common);
++ if (ret) {
++ dev_err(adev->dev, "failed to register dma async device\n");
++ goto err_disable_clks;
++ }
++
++ ret = of_dma_controller_register(pdev->dev.of_node,
++ of_dma_xlate_by_chan_id,
++ &adev->common);
++ if (ret)
++ goto err_unregister_dma;
++
++ return 0;
++
++err_unregister_dma:
++ dma_async_device_unregister(&adev->common);
++err_disable_clks:
++ clk_disable_unprepare(adev->iface_clk);
++err_disable_core_clk:
++ clk_disable_unprepare(adev->core_clk);
++
++ return ret;
++}
++
++static int adm_dma_remove(struct platform_device *pdev)
++{
++ struct adm_device *adev = platform_get_drvdata(pdev);
++ struct adm_chan *achan;
++ u32 i;
++
++ of_dma_controller_free(pdev->dev.of_node);
++ dma_async_device_unregister(&adev->common);
++
++ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
++ achan = &adev->channels[i];
++
++ /* mask IRQs for this channel/EE pair */
++ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
++
++ adm_terminate_all(&adev->channels[i].vc.chan);
++ }
++
++ devm_free_irq(adev->dev, adev->irq, adev);
++
++ clk_disable_unprepare(adev->core_clk);
++ clk_disable_unprepare(adev->iface_clk);
++
++ return 0;
++}
++
++static const struct of_device_id adm_of_match[] = {
++ { .compatible = "qcom,adm", },
++ {}
++};
++MODULE_DEVICE_TABLE(of, adm_of_match);
++
++static struct platform_driver adm_dma_driver = {
++ .probe = adm_dma_probe,
++ .remove = adm_dma_remove,
++ .driver = {
++ .name = "adm-dma-engine",
++ .of_match_table = adm_of_match,
++ },
++};
++
++module_platform_driver(adm_dma_driver);
++
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -65,5 +65,6 @@
+ obj-$(CONFIG_TI_EDMA) += edma.o
+ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
+ obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
++obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
+
+ obj-y += xilinx/