aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/base-files')
-rw-r--r--target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network69
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/diag.sh2
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/leds3
3 files changed, 72 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
new file mode 100644
index 0000000000..69d7dc712b
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
@@ -0,0 +1,69 @@
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0.1
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
+
+config switch
+ option name rtl8366s
+ option reset 1
+ option enable_vlan 1
+ # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+ option blinkrate 2
+
+config switch_vlan
+ option device rtl8366s
+ option vlan 1
+ option ports "0 1 2 3 5t"
+
+config switch_port
+ # Port 1 controls the GREEN configuration of LEDs for
+ # the switch and the section does not correspond to a real
+ # switch port.
+ #
+ # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+ # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+ # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+ # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+ # 14: Link (master); 15: separate register
+
+ option device rtl8366s
+ option port 1
+ option led 6
+
+config switch_port
+ # Port 2 controls the ORANGE configuration of LEDs for
+ # the switch and the section does not correspond to a real
+ # switch port.
+ #
+ # See the key above for switch port 1 for the meaning of the
+ # 'led' setting below.
+
+ option device rtl8366s
+ option port 2
+ option led 9
+
+config switch_port
+ # Port 5 controls the configuration of the WAN LED and the
+ # section does not correspond to a real switch port.
+ #
+ # To toggle the use of green or orange LEDs for the WAN port,
+ # see the LED setting for wndr3700:green:wan in /etc/config/system.
+ #
+ # See the key above for switch port 1 for the meaning of the
+ # 'led' setting below.
+
+ option device rtl8366s
+ option port 5
+ option led 2
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index dd5b6b1b4e..cb3b85177c 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -111,7 +111,7 @@ get_status_led() {
wzr-hp-g300nh)
status_led="buffalo:green:router"
;;
- wndr3700 | wndr3700v2)
+ wndr3700 | wndr3700v2 | wndr3800)
status_led="wndr3700:green:power"
;;
wnr2000)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index 8f72bbaca9..0a724221cf 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -124,7 +124,8 @@ wrt160nl)
;;
wndr3700 | \
-wndr3700v2)
+wndr3700v2 | \
+wndr3800)
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
;;