diff options
author | Luka Perkov <luka@openwrt.org> | 2015-11-04 22:28:47 +0000 |
---|---|---|
committer | Luka Perkov <luka@openwrt.org> | 2015-11-04 22:28:47 +0000 |
commit | 9050d03ecb6b6f88d52c18f1a641fd91815acd03 (patch) | |
tree | 7dd9a7d69c5402ebedc9d0ef3d8884a996b8ccdb /target/linux/kirkwood/patches-4.3/160-goflexhome.patch | |
parent | 0d674c4be60d4ff5f403abfacb7cb17881bd0c5e (diff) | |
download | master-187ad058-9050d03ecb6b6f88d52c18f1a641fd91815acd03.tar.gz master-187ad058-9050d03ecb6b6f88d52c18f1a641fd91815acd03.tar.bz2 master-187ad058-9050d03ecb6b6f88d52c18f1a641fd91815acd03.zip |
kirkwood: add support for 4.3
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47386 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/kirkwood/patches-4.3/160-goflexhome.patch')
-rw-r--r-- | target/linux/kirkwood/patches-4.3/160-goflexhome.patch | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches-4.3/160-goflexhome.patch b/target/linux/kirkwood/patches-4.3/160-goflexhome.patch new file mode 100644 index 0000000000..cdecbd1013 --- /dev/null +++ b/target/linux/kirkwood/patches-4.3/160-goflexhome.patch @@ -0,0 +1,140 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -170,6 +170,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-ds411slim.dtb \ + kirkwood-ea3500.dtb \ + kirkwood-ea4500.dtb \ ++ kirkwood-goflexhome.dtb \ + kirkwood-goflexnet.dtb \ + kirkwood-guruplug-server-plus.dtb \ + kirkwood-ib62x0.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts +@@ -0,0 +1,127 @@ ++/dts-v1/; ++ ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" ++ ++/ { ++ model = "Seagate GoFlex Home"; ++ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x8000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; ++ stdout-path = &uart0; ++ }; ++ ++ ocp@f1000000 { ++ pinctrl: pin-controller@10000 { ++ pmx_usb_power_enable: pmx-usb-power-enable { ++ marvell,pins = "mpp29"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_white: pmx-led-white { ++ marvell,pins = "mpp40"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_green: pmx-led_green { ++ marvell,pins = "mpp46"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_orange: pmx-led-orange { ++ marvell,pins = "mpp47"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ serial@12000 { ++ status = "ok"; ++ }; ++ ++ sata@80000 { ++ status = "okay"; ++ nr-ports = <2>; ++ }; ++ ++ }; ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ health { ++ label = "status:green:health"; ++ gpios = <&gpio1 14 1>; ++ linux,default-trigger = "default-on"; ++ }; ++ fault { ++ label = "status:orange:fault"; ++ gpios = <&gpio1 15 1>; ++ }; ++ misc { ++ label = "status:white:misc"; ++ gpios = <&gpio1 8 1>; ++ linux,default-trigger = "ide-disk"; ++ }; ++ }; ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-0 = <&pmx_usb_power_enable>; ++ pinctrl-names = "default"; ++ ++ usb_power: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "USB Power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ regulator-always-on; ++ regulator-boot-on; ++ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&nand { ++ chip-delay = <40>; ++ status = "okay"; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; ++ read-only; ++ }; ++ ++ partition@100000 { ++ label = "uImage"; ++ reg = <0x0100000 0x400000>; ++ }; ++ ++ partition@500000 { ++ label = "pogoplug"; ++ reg = <0x0500000 0x2000000>; ++ }; ++ ++ partition@2500000 { ++ label = "root"; ++ reg = <0x02500000 0xd800000>; ++ }; ++}; ++ ++&mdio { ++ status = "okay"; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ethernet0-port@0 { ++ phy-handle = <ðphy0>; ++ }; ++}; |