summaryrefslogtreecommitdiffstats
path: root/package/broadcom-57xx/src/hndgige.c
blob: fc7fe7249db604973f4354cf38ff37e3362266cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
/*
 * HND SiliconBackplane Gigabit Ethernet core software interface
 *
 * Copyright 2007, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 *
 */

#include <typedefs.h>
#include <osl.h>
#include <pcicfg.h>
#include <sbconfig.h>
#include <sbutils.h>
#include "sbgige.h"
#include <hndpci.h>
#include "hndgige.h"

uint32
sb_base(uint32 admatch)
{
	uint32 base;
	uint type;

	type = admatch & SBAM_TYPE_MASK;
	ASSERT(type < 3);

	base = 0;

	if (type == 0) {
		base = admatch & SBAM_BASE0_MASK;
	} else if (type == 1) {
		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
		base = admatch & SBAM_BASE1_MASK;
	} else if (type == 2) {
		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
		base = admatch & SBAM_BASE2_MASK;
	}

	return (base);
}

/*
 * Setup the gige core.
 * Resetting the core will lose all settings.
 */
void
sb_gige_init(sb_t *sbh, uint32 unit, bool *rgmii)
{
	volatile pci_config_regs *pci;
	sbgige_pcishim_t *ocp;
	sbconfig_t *sb;
	osl_t *osh;
	uint32 statelow;
	uint32 statehigh;
	uint32 base;
	uint32 idx;
	void *regs;

	/* Sanity checks */
	ASSERT(sbh);
	ASSERT(rgmii);

	idx = sb_coreidx(sbh);

	/* point to the gige core registers */
	regs = sb_setcore(sbh, SB_GIGETH, unit);
	ASSERT(regs);

	osh = sb_osh(sbh);

	pci = &((sbgige_t *)regs)->pcicfg;
	ocp = &((sbgige_t *)regs)->pcishim;
	sb = &((sbgige_t *)regs)->sbconfig;

	/* Enable the core clock and memory access */
	if (!sb_iscoreup(sbh))
		sb_core_reset(sbh, 0, 0);

	/*
	 * Setup the 64K memory-mapped region base address through BAR0.
	 * Leave the other BAR values alone.
	 */
	base = sb_base(R_REG(osh, &sb->sbadmatch1));
	W_REG(osh, &pci->base[0], base);
	W_REG(osh, &pci->base[1], 0);

	/*
	 * Enable the PCI memory access anyway. Any PCI config commands
	 * issued before the core is enabled will go to the emulation
	 * only and will not go to the real PCI config registers.
	 */
	OR_REG(osh, &pci->command, 2);

	/*
	 * Enable the posted write flush scheme as follows:
	 *
	 * - Enable flush on any core register read
	 * - Enable timeout on the flush
	 * - Disable the interrupt mask when flushing
	 *
	 * This differs from the default setting only in that interrupts are
	 * not masked.  Since posted writes are not flushed on interrupt, the
	 * driver must explicitly request a flush in its interrupt handling
	 * by reading a core register.
	 */
	W_REG(osh, &ocp->FlushStatusControl, 0x68);

	/*
	 * Determine whether the GbE is in GMII or RGMII mode.  This is
	 * indicated in bit 16 of the SBTMStateHigh register, which is
	 * part of the core-specific flags field.
	 *
	 * For GMII, bypass the Rx/Tx DLLs, i.e. add no delay to RXC/GTXC
	 * within the core.  For RGMII, do not bypass the DLLs, resulting
	 * in added delay for RXC/GTXC.  The SBTMStateLow register contains
	 * the controls for doing this in the core-specific flags field:
	 *
	 *   bit 24 - Enable DLL controls
	 *   bit 20 - Bypass Rx DLL
	 *   bit 19 - Bypass Tx DLL
	 */
	statelow = R_REG(osh, &sb->sbtmstatelow);	/* DLL controls */
	statehigh = R_REG(osh, &sb->sbtmstatehigh);	/* GMII/RGMII mode */
	if ((statehigh & (1 << 16)) != 0)	/* RGMII */
	{
		statelow &= ~(1 << 20);		/* no Rx bypass (delay) */
		statelow &= ~(1 << 19);		/* no Tx bypass (delay) */
		*rgmii = TRUE;
	}
	else					/* GMII */
	{
		statelow |= (1 << 20);		/* Rx bypass (no delay) */
		statelow |= (1 << 19);		/* Tx bypass (no delay) */
		*rgmii = FALSE;
	}
	statelow |= (1 << 24);			/* enable DLL controls */
	W_REG(osh, &sb->sbtmstatelow, statelow);

	sb_setcoreidx(sbh, idx);
}