From 5ca9eadcb5f5cd9af6f1650029ad64052a1a0b10 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 24 Dec 2013 21:26:17 +0800 Subject: [PATCH] clk: sunxi: Allwinner A20 output clock support This patch adds support for the external clock outputs on the Allwinner A20 SoC. The clock outputs are similar to "module 0" type clocks, with different offsets and widths for clock factors. Signed-off-by: Chen-Yu Tsai --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++ 2 files changed, 58 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 941bd93..79c7197 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -36,6 +36,7 @@ Required properties: "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks + "allwinner,sun7i-a20-out-clk" - for the external output clocks Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 8a07a68..df1f385 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -396,6 +396,47 @@ void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output) /** + * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B + * CLK_OUT rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div, calcm, calcp; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = parent_rate / *freq; + + if (div < 32) + calcp = 0; + else if (div / 2 < 32) + calcp = 1; + else if (div / 4 < 32) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + + *freq = (parent_rate >> calcp) / calcm; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm - 1; + *p = calcp; +} + + + +/** * sunxi_factors_clk_setup() - Setup function for factor clocks */ @@ -455,6 +496,14 @@ struct factors_data { .pwidth = 2, }; +/* user manual says "n" but it's really "p" */ +static struct clk_factors_config sun7i_a20_out_config = { + .mshift = 8, + .mwidth = 5, + .pshift = 20, + .pwidth = 2, +}; + static const struct factors_data sun4i_pll1_data __initconst = { .enable = 31, .table = &sun4i_pll1_config, @@ -492,6 +541,13 @@ struct factors_data { .getter = sun4i_get_mod0_factors, }; +static const struct factors_data sun7i_a20_out_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun7i_a20_out_config, + .getter = sun7i_a20_get_out_factors, +}; + static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, const struct factors_data *data) { @@ -995,6 +1051,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, {.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,}, {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, + {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; -- 1.8.5.1