From b00b5eafa7e8d059bd0ce844e66f648916953270 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 3 Jan 2016 19:11:22 +0100 Subject: [PATCH 2/3] phy: ralink-usb: add driver for Mediatek/Ralink Add a driver to setup the USB phy on Mediatek/Ralink SoCs. The driver is trivial and only sets up power and host mode. Signed-off-by: John Crispin --- .../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++ drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-ralink-usb.c | 171 ++++++++++++++++++++ 4 files changed, 197 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt create mode 100644 drivers/phy/phy-ralink-usb.c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt @@ -0,0 +1,17 @@ +Mediatek/Ralink USB PHY + +Required properties: + - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy + - #phy-cells: should be 0 + - resets: the two reset controllers for host and device + - reset-names: the names of the 2 reset controllers + +Example: + +usbphy: phy { + compatible = "mediatek,mt7620-usbphy"; + #phy-cells = <0>; + + resets = <&rstctrl 22 &rstctrl 25>; + reset-names = "host", "device"; +}; --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -341,6 +341,14 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_RALINK_USB + tristate "Ralink USB PHY driver" + select GENERIC_PHY + depends on RALINK + help + This option enables support for the Ralink USB PHY found inside + RT3352 and MT7620. + config PHY_STIH407_USB tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" depends on RESET_CONTROLLER --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1 obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o +obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o --- /dev/null +++ b/drivers/phy/phy-ralink-usb.c @@ -0,0 +1,228 @@ +/* + * Allwinner ralink USB phy driver + * + * Copyright (C) 2016 John Crispin + * + * Based on code from + * Allwinner Technology Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RT_SYSC_REG_SYSCFG1 0x014 +#define RT_SYSC_REG_CLKCFG1 0x030 +#define RT_SYSC_REG_USB_PHY_CFG 0x05c + +#define OFS_U2_PHY_AC0 0x00 +#define OFS_U2_PHY_AC1 0x04 +#define OFS_U2_PHY_AC2 0x08 +#define OFS_U2_PHY_ACR0 0x10 +#define OFS_U2_PHY_ACR1 0x14 +#define OFS_U2_PHY_ACR2 0x18 +#define OFS_U2_PHY_ACR3 0x1C +#define OFS_U2_PHY_ACR4 0x20 +#define OFS_U2_PHY_AMON0 0x24 +#define OFS_U2_PHY_DCR0 0x60 +#define OFS_U2_PHY_DCR1 0x64 +#define OFS_U2_PHY_DTM0 0x68 +#define OFS_U2_PHY_DTM1 0x6C + +#define RT_RSTCTRL_UDEV BIT(25) +#define RT_RSTCTRL_UHST BIT(22) +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) +#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22) +#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define USB_PHY_UTMI_8B60M BIT(1) +#define UDEV_WAKEUP BIT(0) + +struct ralink_usb_phy { + struct reset_control *rstdev; + struct reset_control *rsthost; + u32 clk; + struct phy *phy; + void __iomem *base; +}; + +static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg) +{ + iowrite32(val, phy->base + reg); +} + +static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg) +{ + return ioread32(phy->base + reg); +} + +static void +u2_phy_init(struct ralink_usb_phy *phy) +{ + u2_phy_r32(phy, OFS_U2_PHY_AC2); + u2_phy_r32(phy, OFS_U2_PHY_ACR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + + u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); + u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); + u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); + u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); +} + +static int ralink_usb_phy_power_on(struct phy *_phy) +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); + u32 t; + + /* enable the phy */ + rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1); + + /* setup host mode */ + rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1); + + /* deassert the reset lines */ + reset_control_deassert(phy->rsthost); + reset_control_deassert(phy->rstdev); + + /* + * The SDK kernel had a delay of 100ms. however on device + * testing showed that 10ms is enough + */ + mdelay(10); + + if (!IS_ERR(phy->base)) + u2_phy_init(phy); + + /* print some status info */ + t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG); + dev_info(&phy->phy->dev, "remote usb device wakeup %s\n", + (t & UDEV_WAKEUP) ? ("enabled") : ("disabled")); + if (t & USB_PHY_UTMI_8B60M) + dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n"); + else + dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n"); + + return 0; +} + +static int ralink_usb_phy_power_off(struct phy *_phy) +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); + + /* assert the reset lines */ + reset_control_assert(phy->rstdev); + reset_control_assert(phy->rsthost); + + /* disable the phy */ + rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1); + + return 0; +} + +static struct phy_ops ralink_usb_phy_ops = { + .power_on = ralink_usb_phy_power_on, + .power_off = ralink_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ralink_usb_phy_of_match[] = { + { + .compatible = "ralink,rt3352-usbphy", + .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | + RT_CLKCFG1_UPHY0_CLK_EN) + }, + { + .compatible = "mediatek,mt7620-usbphy", + .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | + MT7620_CLKCFG1_UPHY0_CLK_EN) }, + { }, +}; +MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match); + +static int ralink_usb_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + const struct of_device_id *match; + struct ralink_usb_phy *phy; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + match = of_match_device(ralink_usb_phy_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + phy->clk = (int) match->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->base = devm_ioremap_resource(&pdev->dev, res); + + phy->rsthost = devm_reset_control_get(&pdev->dev, "host"); + if (IS_ERR(phy->rsthost)) { + dev_err(dev, "host reset is missing\n"); + return PTR_ERR(phy->rsthost); + } + + phy->rstdev = devm_reset_control_get(&pdev->dev, "device"); + if (IS_ERR(phy->rstdev)) { + dev_err(dev, "device reset is missing\n"); + return PTR_ERR(phy->rstdev); + } + + phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + phy_set_drvdata(phy->phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver ralink_usb_phy_driver = { + .probe = ralink_usb_phy_probe, + .driver = { + .of_match_table = ralink_usb_phy_of_match, + .name = "ralink-usb-phy", + } +}; +module_platform_driver(ralink_usb_phy_driver); + +MODULE_DESCRIPTION("Ralink USB phy driver"); +MODULE_AUTHOR("John Crispin "); +MODULE_LICENSE("GPL v2");