#include "mtk-phy.h"

#ifdef CONFIG_PROJECT_7621
#include "mtk-phy-7621.h"

//not used on SoC
PHY_INT32 phy_init(struct u3phy_info *info){	
	return PHY_TRUE;
}

//not used on SoC
PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
	return PHY_TRUE;
}

//--------------------------------------------------------
//    Function : fgEyeScanHelper_CheckPtInRegion()
// Description : Check if the test point is in a rectangle region.
//               If it is in the rectangle, also check if this point
//               is on the multiple of deltaX and deltaY.
//   Parameter : strucScanRegion * prEye - the region
//               BYTE bX
//               BYTE bY
//      Return : BYTE - TRUE :  This point needs to be tested
//                      FALSE:  This point will be omitted
//        Note : First check within the rectangle.
//               Secondly, use modulous to check if the point will be tested.
//--------------------------------------------------------
static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
{
  PHY_INT8 fgValid = true;


  /// Be careful, the axis origin is on the TOP-LEFT corner.
  /// Therefore the top-left point has the minimum X and Y
  /// Botton-right point is the maximum X and Y
  if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
    && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
  {
    // With the region, now check whether or not the input test point is
    // on the multiples of X and Y
    // Do not have to worry about negative value, because we have already
    // check the input bX, and bY is within the region.
    if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
      || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
    {
      // if the division will have remainder, that means
      // the input test point is on the multiples of X and Y
      fgValid = false;
    }
    else
    {
    }
  }
  else
  {
    
    fgValid = false;
  }
  return fgValid;
}

//--------------------------------------------------------
//    Function : EyeScanHelper_RunTest()
// Description : Enable the test, and wait til it is completed
//   Parameter : None
//      Return : None
//        Note : None
//--------------------------------------------------------
static void EyeScanHelper_RunTest(struct u3phy_info *info)
{
	DRV_UDELAY(100);
	// Disable the test
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0);	//RG_SSUSB_RX_EYE_CNT_EN = 0
	DRV_UDELAY(100);
	// Run the test
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
  		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1);	//RG_SSUSB_RX_EYE_CNT_EN = 1
	DRV_UDELAY(100);
	// Wait til it's done
	//RGS_SSUSB_RX_EYE_CNT_RDY
	while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
  		, RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
}

//--------------------------------------------------------
//    Function : fgEyeScanHelper_CalNextPoint()
// Description : Calcualte the test point for the measurement
//   Parameter : None
//      Return : BOOL - TRUE :  the next point is within the
//                              boundaryof HW limit
//                      FALSE:  the next point is out of the HW limit
//        Note : The next point is obtained by calculating
//               from the bottom left of the region rectangle
//               and then scanning up until it reaches the upper
//               limit. At this time, the x will increment, and
//               start scanning downwards until the y hits the
//               zero.
//--------------------------------------------------------
static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
{
  if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
    || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
        )
  {
    /// Reaches the limit of Y axis
    /// Increment X
    _bXcurr++;
    _fgXChged = true;
    _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;

    if (_bXcurr > MAX_X)
    {
      return false;
    }
  }
  else
  {
    _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
    _fgXChged = false;
  }
  return PHY_TRUE;
}

PHY_INT32 eyescan_init(struct u3phy_info *info){
	//initial PHY setting
	U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
		, RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);	
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
		, RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
		, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);    //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
		, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);        //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
	return PHY_TRUE;
}

PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
		, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
	PHY_INT32 cOfst = 0;
	PHY_UINT8 bIdxX = 0;
	PHY_UINT8 bIdxY = 0;
	//PHY_INT8 bCnt = 0;
	PHY_UINT8 bIdxCycCnt = 0;
	PHY_INT8 fgValid;
	PHY_INT8 cX;
	PHY_INT8 cY;
	PHY_UINT8 bExtendCnt;
	PHY_INT8 isContinue;
	//PHY_INT8 isBreak;
	PHY_UINT32 wErr0 = 0, wErr1 = 0;
	//PHY_UINT32 temp;

	PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
	PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];

	_rEye1.bX_tl = x_t1;
	_rEye1.bY_tl = y_t1;
	_rEye1.bX_br = x_br;
	_rEye1.bY_br = y_br;
	_rEye1.bDeltaX = delta_x;
	_rEye1.bDeltaY = delta_y;

	_rEye2.bX_tl = x_t1;
	_rEye2.bY_tl = y_t1;
	_rEye2.bX_br = x_br;
	_rEye2.bY_br = y_br;
	_rEye2.bDeltaX = delta_x;
	_rEye2.bDeltaY = delta_y;

	_rTestCycle.wEyeCnt = eye_cnt;
	_rTestCycle.bNumOfEyeCnt = num_cnt;
	_rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
	_rTestCycle.bPICalEn = PI_cal_en;	

	_bXcurr = 0;
	_bYcurr = 0;
	_eScanDir = SCAN_DN;
	_fgXChged = false;

	printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
		eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
		x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);		

	//force SIGDET to OFF
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
		, RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1);						//RG_SSUSB_RX_SIGDET_SEL = 1
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
		, RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0);						//RG_SSUSB_RX_SIGDET_EN = 0
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
		, RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0);				//RG_SSUSB_RX_SIGDET = 0

	// RX_TRI_DET_EN to Disable
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
		, RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0);		//RG_SSUSB_RX_TRI_DET_EN = 0

	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0);		//RG_SSUSB_RX_EYE_XOFFSET = 0
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0);				//RG_SSUSB_RX_EYE0_Y = 0
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0);				//RG_SSUSB_RX_EYE1_Y = 0


	if (PI_cal_en){
		// PI Calibration
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
			, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);	//RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1

		DRV_UDELAY(20);

		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
		_bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
			, RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO);				//read RGS_SSUSB_RX_PILPO

		printk(KERN_ERR "PI result: %d\n", _bPIResult);
	}
	// Read Initial DAC
	// Set CYCLE
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
		,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt);			//RG_SSUSB_RX_EYE_CNT

	// Eye Monitor Feature
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
		, RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff);		//RG_SSUSB_RX_EYE_MASK = 0x3ff
	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1

	// Move X,Y to the top-left corner
	for (cOfst = 0; cOfst >= -64; cOfst--)
	{
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
	}
	for (cOfst = 0; cOfst < 64; cOfst++)
	{
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);			//RG_SSUSB_RX_EYE0_Y
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);			//RG_SSUSB_RX_EYE1_Y
	}
	//ClearErrorResult
	for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
		for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
		{
			for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
				pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
				pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
			}
		}
	}
	isContinue = true;
	while(isContinue){
		//printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
		// The point is within the boundary, then let's check if it is within
	    // the testing region.
	    // The point is only test-able if one of the eye region
	    // includes this point.
	    fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
           || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
		// Translate bX and bY to 2's complement from where the origin was on the
		// top left corner.
		// 0x40 and 0x3F needs a bit of thinking!!!! >"<
		cX = (_bXcurr ^ 0x40);
		cY = (_bYcurr ^ 0x3F);

		// Set X if necessary
		if (_fgXChged == true)
		{
			U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
				, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX);		//RG_SSUSB_RX_EYE_XOFFSET
		}
		// Set Y
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY);			//RG_SSUSB_RX_EYE0_Y
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY);			//RG_SSUSB_RX_EYE1_Y

		/// Test this point!
		if (fgValid){
			for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
			{
				//run test
				EyeScanHelper_RunTest(info);
			}
			for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
			{
				EyeScanHelper_RunTest(info);
				wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
				wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);

				pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
				pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;

				//EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
//				printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
//					, bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
			}
			//printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
		}
		else{
			
		}
		if (fgEyeScanHelper_CalNextPoint() == false){
#if 0
			printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
		 	printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
#endif
			printk(KERN_ERR "end of eye scan\n");
		  	isContinue = false;
		}
	}
	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));

	// Move X,Y to the top-left corner
	for (cOfst = 63; cOfst >= 0; cOfst--)
	{
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
	}
	for (cOfst = 63; cOfst >= 0; cOfst--)
	{
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);

	}
	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));

	printk(KERN_ERR "PI result: %d\n", _bPIResult);
	printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
	printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
	
	return PHY_TRUE;
}

//not used on SoC
PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
	return PHY_TRUE;
}

//not used on SoC
PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
	return PHY_TRUE;
}

PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
	PHY_INT32 i=0;
	//PHY_INT32 j=0;
	//PHY_INT8 u1SrCalVal = 0;
	//PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
	PHY_INT32 fgRet = 0;	
	PHY_INT32 u4FmOut = 0;	
	PHY_INT32 u4Tmp = 0;
	//PHY_INT32 temp;

	// => RG_USB20_HSTX_SRCAL_EN = 1
	// enable HS TX SR calibration
	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
	DRV_MSLEEP(1);

	// => RG_FRCK_EN = 1    
	// Enable free run clock
	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
		, RG_FRCK_EN_OFST, RG_FRCK_EN, 1);

	// MT6290 HS signal quality patch
	// => RG_CYCLECNT = 400
	// Setting cyclecnt =400
	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
		, RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);

	// => RG_FREQDET_EN = 1
	// Enable frequency meter
	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);

	// wait for FM detection done, set 10ms timeout
	for(i=0; i<10; i++){
		// => u4FmOut = USB_FM_OUT
		// read FM_OUT
		u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
		printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);

		// check if FM detection done 
		if (u4FmOut != 0)
		{
			fgRet = 0;
			printk("FM detection done! loop = %d\n", i);
			
			break;
		}

		fgRet = 1;
		DRV_MSLEEP(1);
	}
	// => RG_FREQDET_EN = 0
	// disable frequency meter
	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);

	// => RG_FRCK_EN = 0
	// disable free run clock
	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
		, RG_FRCK_EN_OFST, RG_FRCK_EN, 0);

	// => RG_USB20_HSTX_SRCAL_EN = 0
	// disable HS TX SR calibration
	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
	DRV_MSLEEP(1);

	if(u4FmOut == 0){
		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
		
		fgRet = 1;
	}
	else{
		// set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
		u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
		printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
	}
	return fgRet;
}

#endif