From d4c71e652f457077eac1ad83a9e32d3f11fc99b2 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 10:34:09 +0300
Subject: [PATCH 225/752] ARM/dts: am335x-evmsk: Audio support

AM335x EVM-SK have only support for audio playback (stereo jack on the
board) via tlv320aic3106 codec connected to McASP1.
Enable the support for audio playback on the board:
- McASP1 configuration
- tlv320aic3106 configuration
- Machine driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts |   51 ++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -158,6 +158,15 @@
 				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+				0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			>;
+		};
 	};
 
 	ocp {
@@ -206,6 +215,18 @@
 				st,max-limit-y = <550>;
 				st,max-limit-z = <750>;
 			};
+
+			tlv320aic3106: tlv320aic3106@1b {
+				compatible = "ti,tlv320aic3106";
+				reg = <0x1b>;
+				status = "okay";
+
+				/* Regulators */
+				AVDD-supply = <&vaux2_reg>;
+				IOVDD-supply = <&vaux2_reg>;
+				DRVDD-supply = <&vaux2_reg>;
+				DVDD-supply = <&vbat>;
+			};
 		};
 
 		musb: usb@47400000 {
@@ -233,6 +254,17 @@
 				pinctrl-0 = <&ecap2_pins>;
 			};
 		};
+
+		sound {
+			compatible = "ti,da830-evm-audio";
+			ti,model = "AM335x-EVMSK";
+			ti,audio-codec = <&tlv320aic3106>;
+			ti,mcasp-controller = <&mcasp1>;
+			ti,codec-clock-rate = <24576000>;
+			ti,audio-routing =
+				"Headphone Jack",       "HPLOUT",
+				"Headphone Jack",       "HPROUT";
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -438,3 +470,22 @@
 &aes {
 	status = "okay";
 };
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		num-serializer = <16>;
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+			0 0 0 0
+			0 0 0 0
+			0 0 0 0
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};