#include #include #include #include #include #include #include "cs5535audio.h" /* * OLPC has an additional feature on top of the regular AD1888 codec features. * It has an Analog Input mode that is switched into (after disabling the * High Pass Filter) via GPIO. It is only supported on B2 and later models. */ int olpc_ai_enable(struct snd_ac97 *ac97, u8 val) { int err; /* * update the High Pass Filter (via AC97_AD_TEST2), and then set * Analog Input mode through a GPIO. */ if (val) { err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, 1<type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL); return 0; } static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol); struct snd_ac97 *ac97 = cs5535au->ac97; olpc_ai_enable(ac97, ucontrol->value.integer.value[0]); return 1; } static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "DC Mode Enable", .info = snd_cs5535audio_ai_info, .get = snd_cs5535audio_ai_get, .put = snd_cs5535audio_ai_put, .private_value = 0 }; void __devinit olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) { /* Bail if this isn't an OLPC platform */ if (!machine_is_olpc()) return; /* If on an OLPC B3 or higher, invert EAPD. */ if (olpc_rev_after(OLPC_REV_B2)) ac97->scaps |= AC97_SCAP_INV_EAPD; } int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) { struct snd_ctl_elem_id elem; /* Bail if this isn't an OLPC platform */ if (!machine_is_olpc()) return 0; /* drop the original ad1888 HPF control */ memset(&elem, 0, sizeof(elem)); elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; strcpy(elem.name, "High Pass Filter Enable"); snd_ctl_remove_id(card, &elem); /* add the override for OLPC's HPF */ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls, ac97->private_data)); }