From 9b744942290c168287013f0a19ff7392f65c8107 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Fri, 16 May 2014 16:14:03 +0200
Subject: net: phy: decouple PHY id and PHY address in fixed PHY driver

Until now, the fixed_phy_add() function was taking as argument
'phy_id', which was used both as the PHY address on the fake fixed
MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and
MII_PHYSID2 registers. However, those two informations are completely
unrelated.

This patch decouples them. The PHY id of fixed PHYs is hardcoded to be
0x0. Ideally, a really reserved value would be nicer, but there
doesn't seem to be an easy of making sure a dummy value can be
assigned to the Linux kernel for such usage.

The PHY address remains passed by the caller of phy_fixed_add().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -31,7 +31,7 @@ struct fixed_mdio_bus {
 };
 
 struct fixed_phy {
-	int id;
+	int addr;
 	u16 regs[MII_REGS_NUM];
 	struct phy_device *phydev;
 	struct fixed_phy_status status;
@@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct
 	if (fp->status.asym_pause)
 		lpa |= LPA_PAUSE_ASYM;
 
-	fp->regs[MII_PHYSID1] = fp->id >> 16;
-	fp->regs[MII_PHYSID2] = fp->id;
+	fp->regs[MII_PHYSID1] = 0;
+	fp->regs[MII_PHYSID2] = 0;
 
 	fp->regs[MII_BMSR] = bmsr;
 	fp->regs[MII_BMCR] = bmcr;
@@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct
 	return 0;
 }
 
-static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
+static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
 {
 	struct fixed_mdio_bus *fmb = bus->priv;
 	struct fixed_phy *fp;
@@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bu
 		return -1;
 
 	list_for_each_entry(fp, &fmb->phys, node) {
-		if (fp->id == phy_id) {
+		if (fp->addr == phy_addr) {
 			/* Issue callback if user registered it. */
 			if (fp->link_update) {
 				fp->link_update(fp->phydev->attached_dev,
@@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bu
 	return 0xFFFF;
 }
 
-static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
+static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
 			    u16 val)
 {
 	return 0;
@@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy
 		return -EINVAL;
 
 	list_for_each_entry(fp, &fmb->phys, node) {
-		if (fp->id == phydev->phy_id) {
+		if (fp->addr == phydev->addr) {
 			fp->link_update = link_update;
 			fp->phydev = phydev;
 			return 0;
@@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy
 }
 EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
 
-int fixed_phy_add(unsigned int irq, int phy_id,
+int fixed_phy_add(unsigned int irq, int phy_addr,
 		  struct fixed_phy_status *status)
 {
 	int ret;
@@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int
 
 	memset(fp->regs, 0xFF,  sizeof(fp->regs[0]) * MII_REGS_NUM);
 
-	fmb->irqs[phy_id] = irq;
+	fmb->irqs[phy_addr] = irq;
 
-	fp->id = phy_id;
+	fp->addr = phy_addr;
 	fp->status = *status;
 
 	ret = fixed_phy_update_regs(fp);