From 5b3e507820c6e120bc2680c0d35f9d9d81fcb98d Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Wed, 14 May 2014 14:58:08 -0300
Subject: mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding

This commit adds support for the user to specify the ECC strength
and step size through the devicetree. We keep the previous behavior,
when there is no DT parameter provided.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1520,8 +1520,13 @@ KEEP_CONFIG:
 		}
 	}
 
-	ecc_strength = chip->ecc_strength_ds;
-	ecc_step = chip->ecc_step_ds;
+	if (pdata->ecc_strength && pdata->ecc_step_size) {
+		ecc_strength = pdata->ecc_strength;
+		ecc_step = pdata->ecc_step_size;
+	} else {
+		ecc_strength = chip->ecc_strength_ds;
+		ecc_step = chip->ecc_step_ds;
+	}
 
 	/* Set default ECC strength requirements on non-ONFI devices */
 	if (ecc_strength < 1 && ecc_step < 1) {
@@ -1730,6 +1735,14 @@ static int pxa3xx_nand_probe_dt(struct p
 	of_property_read_u32(np, "num-cs", &pdata->num_cs);
 	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
 
+	pdata->ecc_strength = of_get_nand_ecc_strength(np);
+	if (pdata->ecc_strength < 0)
+		pdata->ecc_strength = 0;
+
+	pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
+	if (pdata->ecc_step_size < 0)
+		pdata->ecc_step_size = 0;
+
 	pdev->dev.platform_data = pdata;
 
 	return 0;
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -58,6 +58,9 @@ struct pxa3xx_nand_platform_data {
 	/* use an flash-based bad block table */
 	bool	flash_bbt;
 
+	/* requested ECC strength and ECC step size */
+	int ecc_strength, ecc_step_size;
+
 	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
 	unsigned int				nr_parts[NUM_CHIP_SELECT];