From 496f307424d3958ef43ad06ae6a0be98ede2a92c Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Thu, 7 Nov 2013 12:17:16 -0300 Subject: [PATCH 137/203] mtd: nand: pxa3xx: Split FIFO size from to-be-read FIFO count Introduce a fifo_size field to represent the size of the controller's FIFO buffer, and use it to distinguish that size from the amount of data bytes to be read from the FIFO. This is important to support devices with pages larger than the controller's internal FIFO, that need to read the pages in FIFO-sized chunks. In particular, the current code is at least confusing, for it mixes all the different sizes involved: FIFO size, page size and data size. This commit starts the cleaning by removing the info->page_size field that is not currently used. The host->page_size field should also be removed and use always mtd->writesize instead. Follow up commits will clean this up. Signed-off-by: Ezequiel Garcia Tested-by: Daniel Mack Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -201,8 +201,8 @@ struct pxa3xx_nand_info { int use_spare; /* use spare ? */ int is_ready; - unsigned int page_size; /* page size of attached chip */ - unsigned int data_size; /* data size in FIFO */ + unsigned int fifo_size; /* max. data size in the FIFO */ + unsigned int data_size; /* data to be read from FIFO */ unsigned int oob_size; int retcode; @@ -307,16 +307,15 @@ static void pxa3xx_nand_set_timing(struc static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) { - struct pxa3xx_nand_host *host = info->host[info->cs]; int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - info->data_size = host->page_size; + info->data_size = info->fifo_size; if (!oob_enable) { info->oob_size = 0; return; } - switch (host->page_size) { + switch (info->fifo_size) { case 2048: info->oob_size = (info->use_ecc) ? 40 : 64; break; @@ -933,9 +932,12 @@ static int pxa3xx_nand_detect_config(str uint32_t ndcr = nand_readl(info, NDCR); if (ndcr & NDCR_PAGE_SZ) { + /* Controller's FIFO size */ + info->fifo_size = 2048; host->page_size = 2048; host->read_id_bytes = 4; } else { + info->fifo_size = 512; host->page_size = 512; host->read_id_bytes = 2; }