From 9812988c5073448717f74b5bf9aae9da029fb530 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 12 May 2016 09:04:20 +0100 Subject: [PATCH 344/423] BCM270X_DT: Fix the tinylcd35 overlay RTC support Now that overlay parameters are applied before the merge (a requirement for kernel runtime overlays) it is illegal for parameters/overrides to target nodes in the base DTB. Solve the problem of only enabling I2C when an RTC option is used by making the RTC fragments conditional, and including the required status="okay" within the fragments. Signed-off-by: Phil Elwell --- arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) --- a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts @@ -132,28 +132,32 @@ fragment@5 { target = <&i2c1>; - __overlay__ { + __dormant__ { #address-cells = <1>; #size-cells = <0>; + status = "okay"; + pcf8563: pcf8563@51 { compatible = "nxp,pcf8563"; reg = <0x51>; - status = "disabled"; + status = "okay"; }; }; }; fragment@6 { target = <&i2c1>; - __overlay__ { + __dormant__ { #address-cells = <1>; #size-cells = <0>; + status = "okay"; + ds1307: ds1307@68 { compatible = "maxim,ds1307"; reg = <0x68>; - status = "disabled"; + status = "okay"; }; }; }; @@ -213,10 +217,8 @@ <&tinylcd35_ts>,"interrupts:0", <&tinylcd35_ts>,"pendown-gpio:4"; xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; - rtc-pcf = <&i2c1>,"status", - <&pcf8563>,"status"; - rtc-ds = <&i2c1>,"status", - <&ds1307>,"status"; + rtc-pcf = <0>,"=5"; + rtc-ds = <0>,"=6"; keypad = <&keypad>,"status"; }; };