From 691922255a15630c6f726c4c871ce2475d4fec72 Mon Sep 17 00:00:00 2001 From: DigitalDreamtime Date: Fri, 6 May 2016 09:42:55 +0100 Subject: [PATCH] Allow up to 24dB digital gain to be applied when using IQAudIO DAC 24db_digital_gain DT param can be used to specify that PCM512x codec "Digital" volume control should not be limited to 0dB gain, and if specified will allow the full 24dB gain. Signed-off-by: DigitalDreamtime --- arch/arm/boot/dts/overlays/README | 17 +++++++++++++++-- arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 6 +++++- 2 files changed, 20 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -490,8 +490,21 @@ Params: Name: iqaudio-dac Info: Configures the IQaudio DAC audio card -Load: dtoverlay=iqaudio-dac -Params: +Load: dtoverlay=iqaudio-dac, +Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec + Digital volume control. Enable with + "dtoverlay=iqaudio-dac,24db_digital_gain" + (The default behaviour is that the Digital + volume control is limited to a maximum of + 0dB. ie. it can attenuate but not provide + gain. For most users, this will be desired + as it will prevent clipping. By appending + the 24db_digital_gain parameter, the Digital + volume control will allow up to 24dB of + gain. If this parameter is enabled, it is the + responsibility of the user to ensure that + the Digital volume control is set to a value + that does not result in clipping/distortion!) Name: iqaudio-dacplus --- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts @@ -30,10 +30,14 @@ fragment@2 { target = <&sound>; - __overlay__ { + frag2: __overlay__ { compatible = "iqaudio,iqaudio-dac"; i2s-controller = <&i2s>; status = "okay"; }; }; + + __overrides__ { + 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; + }; };