From 8a2725220ebcc2207c979e2c816a911aa20fa3f3 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 7 Mar 2016 09:53:03 +0000 Subject: [PATCH 164/423] BCM270X_DT: Add pi3-miniuart-bt DT overlay Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum usable baudrate. It is also necessary to edit /lib/systemd/system/hciuart.server and replace ttyAMA0 with ttyS0. If cmdline.txt uses the alias serial0 to refer to the user-accessable port then the firmware will replace with the appropriate port whether or not this overlay is used. Signed-off-by: Phil Elwell --- arch/arm/boot/dts/overlays/Makefile | 1 + arch/arm/boot/dts/overlays/README | 10 ++++ .../boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 61 ++++++++++++++++++++++ 3 files changed, 72 insertions(+) create mode 100644 arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -40,6 +40,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-o dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pi3-disable-bt-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += pi3-miniuart-bt-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pitft28-capacitive-overlay.dtb --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -504,6 +504,16 @@ Load: dtoverlay=pi3-disable-bt Params: +Name: pi3-miniuart-bt +Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum + usable baudrate. + N.B. It is also necessary to edit /lib/systemd/system/hciuart.server + and replace ttyAMA0 with ttyS0. +Load: dtoverlay=pi3-miniuart-bt +Params: + + Name: piscreen Info: PiScreen display by OzzMaker.com Load: dtoverlay=piscreen,= --- /dev/null +++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts @@ -0,0 +1,61 @@ +/dts-v1/; +/plugin/; + +/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum + usable baudrate. + + It is also necessary to edit /lib/systemd/system/hciuart.server and + replace ttyAMA0 with ttyS0. + + If cmdline.txt uses the alias serial0 to refer to the user-accessable port + then the firmware will replace with the appropriate port whether or not + this overlay is used. +*/ + +/{ + compatible = "brcm,bcm2708"; + + fragment@0 { + target = <&uart0>; + __overlay__ { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + }; + + fragment@1 { + target = <&uart1>; + __overlay__ { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + }; + + fragment@2 { + target = <&gpio>; + __overlay__ { + uart0_pins: uart0_pins { + brcm,pins = <14 15>; + brcm,function = <4>; /* alt0 */ + brcm,pull = <0 2>; + }; + + uart1_pins: uart1_pins { + brcm,pins = <32 33>; + brcm,function = <2>; /* alt5=UART1 */ + brcm,pull = <0 0>; + }; + }; + }; + + fragment@3 { + target-path = "/aliases"; + __overlay__ { + serial0 = "/soc/uart@7e201000"; + serial1 = "/soc/uart@7e215040"; + }; + }; +};