From 2fc5dd27bf9b75d83a7071d13cca044bc39748fb Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 20 Sep 2016 21:19:28 -0400 Subject: [PATCH] rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device() This saves some 217, or about, derefences of priv->fops. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 37 +++++++++++----------- 1 file changed, 19 insertions(+), 18 deletions(-) --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3886,6 +3886,7 @@ static int rtl8xxxu_init_device(struct i { struct rtl8xxxu_priv *priv = hw->priv; struct device *dev = &priv->udev->dev; + struct rtl8xxxu_fileops *fops = priv->fops; bool macpower; int ret; u8 val8; @@ -3904,7 +3905,7 @@ static int rtl8xxxu_init_device(struct i else macpower = true; - ret = priv->fops->power_on(priv); + ret = fops->power_on(priv); if (ret < 0) { dev_warn(dev, "%s: Failed power on\n", __func__); goto exit; @@ -3921,7 +3922,7 @@ static int rtl8xxxu_init_device(struct i /* * Set RX page boundary */ - rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary); + rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary); ret = rtl8xxxu_download_firmware(priv); dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret); @@ -3932,8 +3933,8 @@ static int rtl8xxxu_init_device(struct i if (ret) goto exit; - if (priv->fops->phy_init_antenna_selection) - priv->fops->phy_init_antenna_selection(priv); + if (fops->phy_init_antenna_selection) + fops->phy_init_antenna_selection(priv); ret = rtl8xxxu_init_mac(priv); @@ -3946,7 +3947,7 @@ static int rtl8xxxu_init_device(struct i if (ret) goto exit; - ret = priv->fops->init_phy_rf(priv); + ret = fops->init_phy_rf(priv); if (ret) goto exit; @@ -3971,7 +3972,7 @@ static int rtl8xxxu_init_device(struct i /* * Set TX buffer boundary */ - val8 = priv->fops->total_page_num + 1; + val8 = fops->total_page_num + 1; rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8); rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8); @@ -3984,14 +3985,14 @@ static int rtl8xxxu_init_device(struct i * The vendor drivers set PBP for all devices, except 8192e. * There is no explanation for this in any of the sources. */ - val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) | - (priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT); + val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) | + (fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT); if (priv->rtl_chip != RTL8192E) rtl8xxxu_write8(priv, REG_PBP, val8); dev_dbg(dev, "%s: macpower %i\n", __func__, macpower); if (!macpower) { - ret = priv->fops->llt_init(priv); + ret = fops->llt_init(priv); if (ret) { dev_warn(dev, "%s: LLT table init failed\n", __func__); goto exit; @@ -4000,12 +4001,12 @@ static int rtl8xxxu_init_device(struct i /* * Chip specific quirks */ - priv->fops->usb_quirks(priv); + fops->usb_quirks(priv); /* * Enable TX report and TX report timer for 8723bu/8188eu/... */ - if (priv->fops->has_tx_report) { + if (fops->has_tx_report) { val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); val8 |= TX_REPORT_CTRL_TIMER_ENABLE; rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); @@ -4140,8 +4141,8 @@ static int rtl8xxxu_init_device(struct i rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); } - if (priv->fops->init_aggregation) - priv->fops->init_aggregation(priv); + if (fops->init_aggregation) + fops->init_aggregation(priv); /* * Enable CCK and OFDM block @@ -4158,7 +4159,7 @@ static int rtl8xxxu_init_device(struct i /* * Start out with default power levels for channel 6, 20MHz */ - priv->fops->set_tx_power(priv, 1, false); + fops->set_tx_power(priv, 1, false); /* Let the 8051 take control of antenna setting */ if (priv->rtl_chip != RTL8192E) { @@ -4174,8 +4175,8 @@ static int rtl8xxxu_init_device(struct i rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); - if (priv->fops->init_statistics) - priv->fops->init_statistics(priv); + if (fops->init_statistics) + fops->init_statistics(priv); if (priv->rtl_chip == RTL8192E) { /* @@ -4193,12 +4194,12 @@ static int rtl8xxxu_init_device(struct i rtl8723a_phy_lc_calibrate(priv); - priv->fops->phy_iq_calibrate(priv); + fops->phy_iq_calibrate(priv); /* * This should enable thermal meter */ - if (priv->fops->gen2_thermal_meter) + if (fops->gen2_thermal_meter) rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); else