--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
 }
 EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
 
-int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-			  bool enable)
-{
-	struct pci_dev *pdev;
-	u32 coremask, tmp;
-	int err = 0;
-
-	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-		/* This bcma device is not on a PCI host-bus. So the IRQs are
-		 * not routed through the PCI core.
-		 * So we must not enable routing through the PCI core. */
-		goto out;
-	}
-
-	pdev = bus->host_pci;
-
-	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-	if (err)
-		goto out;
-
-	coremask = BIT(core->core_index) << 8;
-	if (enable)
-		tmp |= coremask;
-	else
-		tmp &= ~coremask;
-
-	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-
-out:
-	return err;
-}
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
-
 static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
 {
 	u32 w;
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus
 		bcma_core_pci_down(&bus->drv_pci[0]);
 }
 EXPORT_SYMBOL_GPL(bcma_host_pci_down);
+
+/* See also si_pci_setup */
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
+			  bool enable)
+{
+	struct pci_dev *pdev;
+	u32 coremask, tmp;
+	int err = 0;
+
+	if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
+		/* This bcma device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
+
+	pdev = bus->host_pci;
+
+	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+	if (err)
+		goto out;
+
+	coremask = BIT(core->core_index) << 8;
+	if (enable)
+		tmp |= coremask;
+	else
+		tmp &= ~coremask;
+
+	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct
 	switch (dev->dev->bus_type) {
 #ifdef CPTCFG_B43_BCMA
 	case B43_BUS_BCMA:
-		bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
+		bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
 				      dev->dev->bdev, true);
 		bcma_host_pci_up(dev->dev->bdev->bus);
 		break;
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
 	 * Configure pci/pcmcia here instead of in brcms_c_attach()
 	 * to allow mfg hotswap:  down, hotswap (chip power cycle), up.
 	 */
-	bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
+	bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
 			      true);
 
 	/*