From bff468813f78f81e36ebb2a3f4354de7365e640f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 14 Dec 2006 16:41:33 +0000 Subject: Upgrade to Linux 2.6.19 - Includes large parts of the patch from #1021 by dpalffy - Includes RB532 NAND driver changes by n0-1 SVN-Revision: 5789 --- .../patches/240-via_rhine_performance.patch | 492 +++------------------ 1 file changed, 53 insertions(+), 439 deletions(-) (limited to 'target/linux/rb532-2.6/patches/240-via_rhine_performance.patch') diff --git a/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch b/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch index 46bde7e84b..6b263041cc 100644 --- a/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch +++ b/target/linux/rb532-2.6/patches/240-via_rhine_performance.patch @@ -1,39 +1,27 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c ---- linux.old/drivers/net/via-rhine.c 2006-12-07 05:53:39.000000000 +0100 -+++ linux.dev/drivers/net/via-rhine.c 2006-12-07 07:06:52.000000000 +0100 -@@ -131,6 +131,10 @@ - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. +--- linux.old/drivers/net/via-rhine.c 2006-11-29 22:57:37.000000000 +0100 ++++ linux.dev/drivers/net/via-rhine.c 2006-12-14 03:39:01.000000000 +0100 +@@ -33,6 +33,7 @@ + #define DRV_VERSION "1.4.2" + #define DRV_RELDATE "Sept-11-2006" -+ OpenWrt Version (Felix Fietkau ) -+ - Performance improvements -+ - NAPI polling -+ - */ ++#define PKT_ALIGN 1 - #define DRV_NAME "via-rhine" -@@ -142,7 +146,6 @@ + /* A few user-configurable values. These may be modified when a driver module is loaded. */ - +@@ -40,9 +41,11 @@ static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ --static int max_interrupt_work = 20; + static int max_interrupt_work = 20; ++#ifndef PKT_ALIGN /* Set the copy breakpoint for the copy-only-tiny-frames scheme. Setting to > 1518 effectively disables this feature. */ -@@ -165,9 +168,9 @@ - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ --#define TX_RING_SIZE 16 --#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ --#define RX_RING_SIZE 16 -+#define TX_RING_SIZE 64 -+#define TX_QUEUE_LEN 60 /* Limit ring entries actually used. */ -+#define RX_RING_SIZE 64 - + static int rx_copybreak; ++#endif - /* Operational parameters that usually are not changed. */ -@@ -201,6 +204,7 @@ + /* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +@@ -105,6 +108,7 @@ #include #include #include @@ -41,138 +29,24 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c /* These identify the driver base version and may not be removed. */ static char version[] __devinitdata = -@@ -217,10 +221,8 @@ - MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); - MODULE_LICENSE("GPL"); +@@ -123,12 +127,14 @@ --module_param(max_interrupt_work, int, 0); + module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); - module_param(rx_copybreak, int, 0); --MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); +-module_param(rx_copybreak, int, 0); + module_param(avoid_D3, bool, 0); + MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); - MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); - -@@ -461,6 +463,8 @@ - struct tx_desc *tx_ring; - dma_addr_t rx_ring_dma; - dma_addr_t tx_ring_dma; -+ u32 istat; -+ u32 imask; - - /* The addresses of receive-in-place skbuffs. */ - struct sk_buff *rx_skbuff[RX_RING_SIZE]; -@@ -500,9 +504,10 @@ - static void rhine_tx_timeout(struct net_device *dev); - static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); - static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); --static void rhine_tx(struct net_device *dev); --static void rhine_rx(struct net_device *dev); --static void rhine_error(struct net_device *dev, int intr_status); -+static int rhine_poll(struct net_device *dev, int *budget); -+static int rhine_tx(struct net_device *dev); -+static int rhine_rx(struct net_device *dev, int max_work); -+static void rhine_error(struct net_device *dev); - static void rhine_set_rx_mode(struct net_device *dev); - static struct net_device_stats *rhine_get_stats(struct net_device *dev); - static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -@@ -597,6 +602,7 @@ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - -+ pci_enable_device(rp->pdev); - iowrite8(Cmd1Reset, ioaddr + ChipCmd1); - IOSYNC; - -@@ -618,6 +624,28 @@ - "failed" : "succeeded"); - } - -+static inline void rhine_intr_enable(struct net_device *dev) -+{ -+ struct rhine_private *rp = netdev_priv(dev); -+ void __iomem *ioaddr = rp->base; -+ -+ iowrite16(rp->imask = (IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | -+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted | -+ IntrTxDone | IntrTxError | IntrTxUnderrun | -+ IntrPCIErr | IntrStatsMax | IntrLinkChange), -+ ioaddr + IntrEnable); -+} -+ -+static inline void rhine_intr_disable(struct net_device *dev) -+{ -+ struct rhine_private *rp = netdev_priv(dev); -+ void __iomem *ioaddr = rp->base; -+ -+ iowrite16(rp->imask = (IntrRxOverflow | IntrRxNoBuf | IntrTxAborted | -+ IntrTxError | IntrTxUnderrun | IntrPCIErr | IntrStatsMax | IntrLinkChange), -+ ioaddr + IntrEnable); -+} -+ - #ifdef USE_MMIO - static void enable_mmio(long pioaddr, u32 quirks) - { -@@ -660,14 +688,26 @@ +-MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); + MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); ++#ifndef PKT_ALIGN ++module_param(rx_copybreak, int, 0); ++MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); ++#endif - } - --#ifdef CONFIG_NET_POLL_CONTROLLER --static void rhine_poll(struct net_device *dev) -+static int rhine_poll(struct net_device *dev, int *budget) - { -- disable_irq(dev->irq); -- rhine_interrupt(dev->irq, (void *)dev, NULL); -- enable_irq(dev->irq); -+ unsigned int work_done, work_to_do = min(*budget, dev->quota); -+ struct rhine_private *rp = netdev_priv(dev); -+ -+ work_done = rhine_rx(dev, (*budget < dev->quota ? *budget : dev->quota)); -+ -+ if (rp->istat & (IntrTxErrSummary | IntrTxDone)) -+ rhine_tx(dev); -+ -+ *budget -= work_done; -+ dev->quota -= work_done; -+ -+ if (work_done < work_to_do) { -+ netif_rx_complete(dev); -+ rhine_intr_enable(dev); -+ } -+ -+ return (work_done >= work_to_do); - } --#endif - - static void rhine_hw_init(struct net_device *dev, long pioaddr) - { -@@ -846,11 +886,10 @@ - dev->ethtool_ops = &netdev_ethtool_ops; - dev->tx_timeout = rhine_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; --#ifdef CONFIG_NET_POLL_CONTROLLER -- dev->poll_controller = rhine_poll; --#endif -- if (rp->quirks & rqRhineI) -- dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; -+ dev->poll = rhine_poll; -+ dev->weight = 64; -+ -+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; - - /* dev->name not defined before register_netdev()! */ - rc = register_netdev(dev); -@@ -894,6 +933,10 @@ - } - } - rp->mii_if.phy_id = phy_id; -+ -+ // shut down until somebody really needs it -+ iowrite8(0x80, ioaddr + 0xa1); -+ pci_set_power_state(rp->pdev, 3); - - return 0; - -@@ -985,7 +1028,7 @@ + /* + Theory of Operation +@@ -923,7 +929,7 @@ /* Fill in the Rx buffers. Handle allocation failure gracefully. */ for (i = 0; i < RX_RING_SIZE; i++) { @@ -181,299 +55,39 @@ diff -ur linux.old/drivers/net/via-rhine.c linux.dev/drivers/net/via-rhine.c rp->rx_skbuff[i] = skb; if (skb == NULL) break; -@@ -1120,11 +1163,7 @@ - rhine_set_rx_mode(dev); - - /* Enable interrupts by setting the interrupt mask. */ -- iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | -- IntrRxDropped | IntrRxNoBuf | IntrTxAborted | -- IntrTxDone | IntrTxError | IntrTxUnderrun | -- IntrPCIErr | IntrStatsMax | IntrLinkChange, -- ioaddr + IntrEnable); -+ rhine_intr_enable(dev); - - iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8), - ioaddr + ChipCmd); -@@ -1235,6 +1274,7 @@ - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); - - netif_start_queue(dev); -+ netif_poll_enable(dev); - - return 0; - } -@@ -1263,8 +1303,8 @@ - /* Reinitialize the hardware. */ - rhine_chip_reset(dev); - init_registers(dev); -- - spin_unlock(&rp->lock); -+ - enable_irq(rp->pdev->irq); - - dev->trans_start = jiffies; -@@ -1358,77 +1398,66 @@ - struct net_device *dev = dev_instance; - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; -- u32 intr_status; -- int boguscnt = max_interrupt_work; - int handled = 0; - -- while ((intr_status = get_intr_status(dev))) { -+ if ((rp->istat = (get_intr_status(dev) & rp->imask))) { - handled = 1; - - /* Acknowledge all of the current interrupt sources ASAP. */ -- if (intr_status & IntrTxDescRace) -+ if (rp->istat & IntrTxDescRace) - iowrite8(0x08, ioaddr + IntrStatus2); -- iowrite16(intr_status & 0xffff, ioaddr + IntrStatus); -+ iowrite16(rp->istat & 0xffff, ioaddr + IntrStatus); - IOSYNC; - -- if (debug > 4) -- printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n", -- dev->name, intr_status); -+ if (likely(rp->istat & ((IntrRxDone | IntrRxErr | IntrRxDropped | -+ IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf | -+ IntrTxErrSummary | IntrTxDone)))) { -+ -+ rhine_intr_disable(dev); - -- if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | -- IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) -- rhine_rx(dev); -- -- if (intr_status & (IntrTxErrSummary | IntrTxDone)) { -- if (intr_status & IntrTxErrSummary) { -- /* Avoid scavenging before Tx engine turned off */ -- RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); -- if (debug > 2 && -- ioread8(ioaddr+ChipCmd) & CmdTxOn) -- printk(KERN_WARNING "%s: " -- "rhine_interrupt() Tx engine" -- "still on.\n", dev->name); -- } -- rhine_tx(dev); -+ if (likely(netif_rx_schedule_prep(dev))) -+ __netif_rx_schedule(dev); - } - - /* Abnormal error summary/uncommon events handlers. */ -- if (intr_status & (IntrPCIErr | IntrLinkChange | -+ if (unlikely(rp->istat & (IntrPCIErr | IntrLinkChange | - IntrStatsMax | IntrTxError | IntrTxAborted | -- IntrTxUnderrun | IntrTxDescRace)) -- rhine_error(dev, intr_status); -- -- if (--boguscnt < 0) { -- printk(KERN_WARNING "%s: Too much work at interrupt, " -- "status=%#8.8x.\n", -- dev->name, intr_status); -- break; -- } -+ IntrTxUnderrun | IntrTxDescRace))) -+ rhine_error(dev); - } - -- if (debug > 3) -- printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n", -- dev->name, ioread16(ioaddr + IntrStatus)); - return IRQ_RETVAL(handled); - } - - /* This routine is logically part of the interrupt handler, but isolated - for clarity. */ --static void rhine_tx(struct net_device *dev) -+static int rhine_tx(struct net_device *dev) - { - struct rhine_private *rp = netdev_priv(dev); - int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE; -+ void __iomem *ioaddr = rp->base; -+ int done = 0; -+ -+ /* Avoid scavenging before Tx engine turned off */ -+ RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); -+ if (debug > 2 && -+ ioread8(ioaddr+ChipCmd) & CmdTxOn) -+ printk(KERN_WARNING "%s: " -+ "rhine_interrupt() Tx engine" -+ "still on.\n", dev->name); - -- spin_lock(&rp->lock); - - /* find and cleanup dirty tx descriptors */ - while (rp->dirty_tx != rp->cur_tx) { -+ spin_lock(&rp->lock); - txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); - if (debug > 6) - printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n", - entry, txstatus); -- if (txstatus & DescOwn) -+ if (txstatus & DescOwn) { -+ spin_unlock(&rp->lock); - break; -+ } - if (txstatus & 0x8000) { - if (debug > 1) - printk(KERN_DEBUG "%s: Transmit error, " -@@ -1443,6 +1472,7 @@ - (txstatus & 0x0800) || (txstatus & 0x1000)) { - rp->stats.tx_fifo_errors++; - rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); -+ spin_unlock(&rp->lock); - break; /* Keep the skb - we try again */ - } - /* Transmitter restarted in 'abnormal' handler. */ -@@ -1457,6 +1487,7 @@ - txstatus & 0xF); - rp->stats.tx_bytes += rp->tx_skbuff[entry]->len; - rp->stats.tx_packets++; -+ done++; - } - /* Free the original skb. */ - if (rp->tx_skbuff_dma[entry]) { -@@ -1465,23 +1496,25 @@ - rp->tx_skbuff[entry]->len, - PCI_DMA_TODEVICE); - } -- dev_kfree_skb_irq(rp->tx_skbuff[entry]); -+ dev_kfree_skb_any(rp->tx_skbuff[entry]); - rp->tx_skbuff[entry] = NULL; - entry = (++rp->dirty_tx) % TX_RING_SIZE; -+ spin_unlock(&rp->lock); - } -+ - if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4) - netif_wake_queue(dev); - -- spin_unlock(&rp->lock); -+ return done; - } - - /* This routine is logically part of the interrupt handler, but isolated - for clarity and better register allocation. */ --static void rhine_rx(struct net_device *dev) -+static int rhine_rx(struct net_device *dev, int max_work) - { - struct rhine_private *rp = netdev_priv(dev); - int entry = rp->cur_rx % RX_RING_SIZE; -- int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx; -+ int done = 0; - - if (debug > 4) { - printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", -@@ -1498,7 +1531,7 @@ - if (debug > 4) - printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", - desc_status); -- if (--boguscnt < 0) -+ if (--max_work < 0) - break; - if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { - if ((desc_status & RxWholePkt) != RxWholePkt) { -@@ -1523,9 +1556,7 @@ - if (desc_status & 0x0004) rp->stats.rx_frame_errors++; - if (desc_status & 0x0002) { - /* this can also be updated outside the interrupt handler */ -- spin_lock(&rp->lock); - rp->stats.rx_crc_errors++; -- spin_unlock(&rp->lock); - } - } - } else { -@@ -1553,6 +1584,7 @@ +@@ -1481,6 +1487,9 @@ + /* Length should omit the CRC */ + int pkt_len = data_size - 4; + ++#ifdef PKT_ALIGN ++ int i; ++#else + /* Check if the packet is long enough to accept without + copying to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && +@@ -1500,7 +1509,9 @@ + rp->rx_skbuff_dma[entry], rp->rx_buf_sz, PCI_DMA_FROMDEVICE); - } else { -+ int i; +- } else { ++ } else ++#endif ++ { skb = rp->rx_skbuff[entry]; if (skb == NULL) { printk(KERN_ERR "%s: Inconsistent Rx " -@@ -1561,6 +1593,14 @@ - break; - } - rp->rx_skbuff[entry] = NULL; -+ -+ /* align the data to the ip header - should be faster than using rx_copybreak */ +@@ -1514,6 +1525,14 @@ + rp->rx_skbuff_dma[entry], + rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); ++#ifdef PKT_ALIGN ++ /* align the data to the ip header - should be faster than copying the entire packet */ + for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) { + put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2)); + } + skb->data += 2; + skb->tail += 2; -+ - skb_put(skb, pkt_len); - pci_unmap_single(rp->pdev, - rp->rx_skbuff_dma[entry], -@@ -1568,10 +1608,11 @@ - PCI_DMA_FROMDEVICE); ++#endif } skb->protocol = eth_type_trans(skb, dev); -- netif_rx(skb); -+ netif_receive_skb(skb); - dev->last_rx = jiffies; - rp->stats.rx_bytes += pkt_len; - rp->stats.rx_packets++; -+ done++; - } - entry = (++rp->cur_rx) % RX_RING_SIZE; - rp->rx_head_desc = &rp->rx_ring[entry]; -@@ -1582,7 +1623,7 @@ - struct sk_buff *skb; - entry = rp->dirty_rx % RX_RING_SIZE; - if (rp->rx_skbuff[entry] == NULL) { -- skb = dev_alloc_skb(rp->rx_buf_sz); -+ skb = dev_alloc_skb(rp->rx_buf_sz + 4); - rp->rx_skbuff[entry] = skb; - if (skb == NULL) - break; /* Better luck next round. */ -@@ -1595,6 +1636,8 @@ - } - rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); - } -+ -+ return done; - } - - /* -@@ -1644,11 +1687,11 @@ - - } - --static void rhine_error(struct net_device *dev, int intr_status) -+static void rhine_error(struct net_device *dev) - { - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; -- -+ u32 intr_status = rp->istat; - spin_lock(&rp->lock); - - if (intr_status & IntrLinkChange) -@@ -1895,6 +1938,7 @@ - - /* Disable interrupts by clearing the interrupt mask. */ - iowrite16(0x0000, ioaddr + IntrEnable); -+ rp->imask = 0; - - /* Stop the chip's Tx and Rx processes. */ - iowrite16(CmdStop, ioaddr + ChipCmd); -@@ -1906,6 +1950,9 @@ - free_tbufs(dev); - free_ring(dev); - -+ writeb(0x80, ioaddr + 0xa1); -+ pci_set_power_state(rp->pdev, 3); -+ - return 0; - } - -@@ -1935,6 +1982,7 @@ - return; /* Nothing to do for non-WOL adapters */ - - rhine_power_init(dev); -+ netif_poll_disable(dev); - - /* Make sure we use pattern 0, 1 and not 4, 5 */ - if (rp->quirks & rq6patterns) + #ifdef CONFIG_VIA_RHINE_NAPI -- cgit v1.2.3