From bcd2113a32d80c0dc2c4140f76e96b28c3f70a27 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 19 Aug 2016 20:46:50 +0200 Subject: ramips: TEW-691GR: fix switch and wireless Due to the missing phy-mode setting, the switch wasn't initialised. The wireless requires an eeprom to work. Use the same mac addresses as the stock firmware. Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/02_network | 3 +-- target/linux/ramips/dts/TEW-691GR.dts | 5 ++++- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'target/linux/ramips') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 73404d91b0..32bfa77f70 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -333,8 +333,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary factory 57350) ;; tew-691gr) - lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 3) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3) ;; tew-692gr) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1) diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts index 750c24fbe9..b1f7320851 100644 --- a/target/linux/ramips/dts/TEW-691GR.dts +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -86,7 +86,7 @@ }; ðernet { - mtd-mac-address = <&factory 0x28>; + mtd-mac-address = <&factory 0x4>; port@0 { phy-handle = <&phy0>; @@ -98,10 +98,13 @@ phy0: ethernet-phy@0 { reg = <0>; + phy-mode = "rgmii"; }; }; }; &wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x0>; ralink,5ghz = <0>; }; -- cgit v1.2.3