From c71838faa1dc9ade9918abbc61b587ff35880a53 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 29 May 2012 16:39:03 +0000 Subject: ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989 --- .../files/arch/mips/ralink/rt305x/mach-dir-300-revb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'target/linux/ramips/files/arch') diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c index 3581972860..e4c5c73da1 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c @@ -22,6 +22,12 @@ #define DIR_300B_GPIO_LED_STATUS_AMBER 8 #define DIR_300B_GPIO_LED_STATUS_GREEN 9 #define DIR_300B_GPIO_LED_WPS 13 +/* + * NOTE: The wan led is also connected to the switch, both + * switch and gpio must be active to make it light up + */ +#define DIR_300B_GPIO_LED_WAN_GREEN 12 +#define DIR_300B_GPIO_LED_WAN_AMBER 14 #define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */ #define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */ @@ -38,6 +44,14 @@ static struct gpio_led dir_300b_leds_gpio[] __initdata = { .name = "d-link:green:status", .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, .active_low = 1, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, }, { .name = "d-link:blue:wps", .gpio = DIR_300B_GPIO_LED_WPS, -- cgit v1.2.3