From 40b740b23234574115225bf8bde7bc679f8034e1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 17 Jan 2015 21:20:05 +0000 Subject: ramips: add preliminary support for DIR-860L B1 Signed-off-by: Felix Fietkau SVN-Revision: 44016 --- target/linux/ramips/dts/DIR-860L-B1.dts | 107 ++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 target/linux/ramips/dts/DIR-860L-B1.dts (limited to 'target/linux/ramips/dts') diff --git a/target/linux/ramips/dts/DIR-860L-B1.dts b/target/linux/ramips/dts/DIR-860L-B1.dts new file mode 100644 index 0000000000..fd1e044bda --- /dev/null +++ b/target/linux/ramips/dts/DIR-860L-B1.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; + model = "D-Link DIR-860L B1"; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x4000>; + read-only; + }; + + radio: partition@34000 { + label = "radio"; + reg = <0x34000 0x4000>; + read-only; + }; + + factory: partition@38000 { + label = "factory"; + reg = <0x38000 0x8000>; + read-only; + }; + + partition@40000 { + label = "defaults"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&radio 0>; + mediatek,2ghz = <0>; + }; + }; + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&radio 0x2000>; + mediatek,5ghz = <0>; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + }; +}; -- cgit v1.2.3