From 553fea9f195aaefa8533b99e0d0c9ff9a27fc4f5 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Mon, 17 Aug 2015 05:57:18 +0000
Subject: ramips: fix indentation and other mistakes in .dts{, i} files

The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46613
---
 target/linux/ramips/dts/WZR-AGL300NH.dts | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'target/linux/ramips/dts/WZR-AGL300NH.dts')

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 8e18e90be2..5d6c25d2cf 100644
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -26,7 +26,6 @@
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -37,16 +36,19 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x10000>;
 			read-only;
 		};
+
 		factory: partition@40000 {
 			label = "factory";
 			reg = <0x40000 0x10000>;
 			read-only;
 		};
+
 		partition@50000 {
 			label = "firmware";
 			reg = <0x50000 0x3b0000>;
@@ -57,12 +59,13 @@
 		status = "okay";
 		mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
+		port@0 {
 			ralink,fixed-link = <1000 1 1 1>;
 		};
 
 		mdio-bus {
 			status = "okay";
+
 			phy0: ethernet-phy@0 {
 				phy-mode = "mii";
 				reg = <0>;
@@ -85,16 +88,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		router {
 			label = "router_switch";
 			gpios = <&gpio0 7 0>;
 			linux,code = <0x100>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;
@@ -109,14 +115,17 @@
 			label = "buffalo:green:router";
 			gpios = <&gpio0 8 1>;
 		};
+
 		diag {
 			label = "buffalo:red:diag";
 			gpios = <&gpio0 12 1>;
 		};
+
 		security_g {
 			label = "buffalo:orange:security_g";
 			gpios = <&gpio0 11 1>;
 		};
+
 		security_n {
 			label = "buffalo:orange:security_n";
 			gpios = <&gpio0 13 1>;
@@ -129,7 +138,6 @@
 		reg = <0x00440000 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-
 		status = "ok";
 	};
 };
-- 
cgit v1.2.3