From 553fea9f195aaefa8533b99e0d0c9ff9a27fc4f5 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Mon, 17 Aug 2015 05:57:18 +0000
Subject: ramips: fix indentation and other mistakes in .dts{, i} files

The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46613
---
 target/linux/ramips/dts/NA930.dts | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'target/linux/ramips/dts/NA930.dts')

diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts
index 6fe9964da9..4397b2cc3f 100644
--- a/target/linux/ramips/dts/NA930.dts
+++ b/target/linux/ramips/dts/NA930.dts
@@ -16,6 +16,7 @@
 				ralink,group = "i2c", "rgmii2", "spi", "ephy";
 				ralink,function = "gpio";
 			};
+
 			uartf_gpio {
 				ralink,group = "uartf";
 				ralink,function = "gpio uartf";
@@ -41,21 +42,25 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mtk,mt7620-nand";
+
 		partition@0 {
 			label = "u-boot";
 			reg = <0x0 0x20000>;
 			read-only;
 		};
+
 		partition@200000 {
 			label = "factory";
 			reg = <0x200000 0x40000>;
 			read-only;
 		};
+
 		partition@240000 {
 			label = "Config";
 			reg = <0x240000 0x400000>;
 			read-only;
 		};
+
 		partition@640000 {
 			label = "firmware";
 			reg = <0x640000 0x1400000>;
@@ -64,10 +69,8 @@
 
 	ethernet@10100000 {
 		status = "okay";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
 		ralink,port-map = "llllw";
 
 		port@4 {
@@ -102,16 +105,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 11 1>;
 			linux,code = <0x198>;
 		};
+
 		zwave {
 			label = "zwave";
 			gpios = <&gpio0 12 1>;
 			linux,code = <0x100>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 14 1>;
@@ -121,18 +127,22 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		zwave {
 			label = "na930:blue:zwave";
 			gpios = <&gpio2 0 1>;
 		};
+
 		status {
 			label = "na930:blue:status";
 			gpios = <&gpio2 26 1>;
 		};
+
 		service {
 			label = "na930:blue:service";
 			gpios = <&gpio2 28 1>;
 		};
+
 		power {
 			label = "na930:blue:power";
 			gpios = <&gpio2 29 1>;
-- 
cgit v1.2.3