From 770b28f146f7bf9495013a57504258d7f92263c4 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 3 Apr 2013 09:59:46 +0000 Subject: add the dts files that describe the boards in future Signed-off-by: John Crispin SVN-Revision: 36168 --- target/linux/ramips/dts/MZK-W300NH2.dts | 92 +++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 target/linux/ramips/dts/MZK-W300NH2.dts (limited to 'target/linux/ramips/dts/MZK-W300NH2.dts') diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts new file mode 100644 index 0000000000..377bea5257 --- /dev/null +++ b/target/linux/ramips/dts/MZK-W300NH2.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "MZK-W300NH2", "ralink,rt3052-soc"; + model = "Planex MZK-W300NH2"; + + memorydetect { + ralink,memory = <0x0 0x200000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)"; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "mdio", "sdram", "rgmii"; + ralink,gpiommux = "i2c", "spi", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "mzkw300nh2:green:power"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "mzkw300nh2:amber:wlan"; + gpios = <&gpio0 14 1>; + }; + wps { + label = "mzkw300nh2:amber:wps"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + rt { + label = "rt"; + gpios = <&gpio0 13 1>; + linux,code = <0x100>; + }; + }; + + wmac@10180000 { + status = "okay"; + }; +}; -- cgit v1.2.3