From 6b0425a18773552f109cadf918ee6b4bcc60eec0 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 29 Apr 2016 11:34:56 +0000 Subject: ramips: add support for Planex MZK-EX750NP. add support for Planex MZK-EX750NP. MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA SVN-Revision: 49268 --- target/linux/ramips/dts/MZK-EX750NP.dts | 150 ++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 target/linux/ramips/dts/MZK-EX750NP.dts (limited to 'target/linux/ramips/dts/MZK-EX750NP.dts') diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts new file mode 100644 index 0000000000..9b5b418080 --- /dev/null +++ b/target/linux/ramips/dts/MZK-EX750NP.dts @@ -0,0 +1,150 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "Planex MZK-EX750NP"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x730000>; + }; + + partition@780000 { + label = "Udata"; + reg = <0x780000 0x80000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "nd_sd", "rgmii2", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "mzk-ex750np:red:power"; + gpios = <&gpio0 14 1>; + }; + + wifi { + label = "mzk-ex750np:red:wifi"; + gpios = <&gpio3 0 1>; + }; + + wps { + label = "mzk-ex750np:green:wps"; + gpios = <&gpio0 10 1>; + }; + + rep { + label = "mzk-ex750np:blue:rep"; + gpios = <&gpio2 16 1>; + }; + + wifi1 { + label = "mzk-ex750np:blue:wifi1"; + gpios = <&gpio2 19 1>; + }; + + wifi2 { + label = "mzk-ex750np:blue:wifi2"; + gpios = <&gpio2 18 1>; + }; + + wifi3 { + label = "mzk-ex750np:blue:wifi3"; + gpios = <&gpio2 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 13 0>; + linux,code = <0x211>; + }; + }; +}; -- cgit v1.2.3