From 813a7c3827afe71f49f2985c607585900a7db4fb Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Mon, 2 Jun 2014 12:42:52 +0000
Subject: ralink: Add support for samsung cy-swr1100 wireless router

It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908
---
 target/linux/ramips/dts/CY-SWR1100.dts | 135 +++++++++++++++++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 target/linux/ramips/dts/CY-SWR1100.dts

(limited to 'target/linux/ramips/dts/CY-SWR1100.dts')

diff --git a/target/linux/ramips/dts/CY-SWR1100.dts b/target/linux/ramips/dts/CY-SWR1100.dts
new file mode 100644
index 0000000000..d0cc0e5fc5
--- /dev/null
+++ b/target/linux/ramips/dts/CY-SWR1100.dts
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+	compatible = "CY-SWR1100", "ralink,rt3883-soc";
+	model = "Samsung CY-SWR1100";
+
+	palmbus@10000000 {
+		gpio1: gpio@638 {
+			status = "okay";
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x66>;
+		port@0 {
+			ralink,fixed-link = <1000 1 1 1>;
+		};
+	};
+
+	pci@10140000 {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pci_pins>;
+		pci_pins: pci {
+			pci {
+				ralink,group = "pci";
+				ralink,function = "pci-fnc";
+			};
+		};
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	nor-flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+		partition@30000 {
+			label = "uboot-env";
+			reg = <0x30000 0x4000>;
+			read-only;
+		};
+		factory: partition@34000 {
+			label = "factory";
+			reg = <0x34000 0x4000>;
+			read-only;
+		};
+		partition@38000 {
+			label = "nvram";
+			reg = <0x38000 0x8000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "devdata";
+			reg = <0x40000 0x10000>;
+		};
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+
+	rtl8367 {
+		compatible = "realtek,rtl8367";
+		gpio-sda = <&gpio0 1 0>;
+		gpio-sck = <&gpio0 2 0>;
+		realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 6 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 3 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wps {
+			label = "samsung:blue:wps";
+			gpios = <&gpio0 0 1>;
+		};
+		usb {
+			label = "samsung:blue:usb";
+			gpios = <&gpio1 1 1>;
+		};
+	};
+};
-- 
cgit v1.2.3