From a7c6cf5182a3b20afb1c98d0d79247d6a9bc104b Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Sun, 14 Aug 2016 00:47:14 +0200 Subject: ramips: TEW-692GR: fix switch and wireless The AR8327 initvals were not copied to the DTS during the switch from mach file to device tree and broke the switch on the device. The former used PORT6 related initvals were wrong and have been corrected. The phy mode setting for the switch was missing in the DTS as well. The wireless requires an eeprom to work. The dual band wireless chips have both bands enabled by default but only one band per chip is working. The stock firmware uses the following mac addresses: LAN: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 5 GHz: AA:BB:CC:DD:EE:E8 Assuming the mac address range :E4 to :E8 is reserved for this device, the MAC addresses were reorder to have a unique MAC address for each interface: LAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E5 5 GHz: AA:BB:CC:DD:EE:E8 Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/02_network | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'target/linux/ramips/base-files') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 0bf1a8a3ba..73404d91b0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -337,8 +337,7 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 3) ;; tew-692gr) - lan_mac=$(cat /sys/class/net/eth0/address) - wan_mac=$(macaddr_add "$lan_mac" 4) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1) ;; tiny-ac) lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) -- cgit v1.2.3