From 24b8d31badc276c5c532995c523a2c7c898be497 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 20 May 2016 14:36:51 +0200 Subject: mvebu: update to linux 4.4 Signed-off-by: Felix Fietkau --- .../mvebu/patches-4.1/000-new_linksys_boards.patch | 613 --------------------- 1 file changed, 613 deletions(-) delete mode 100644 target/linux/mvebu/patches-4.1/000-new_linksys_boards.patch (limited to 'target/linux/mvebu/patches-4.1/000-new_linksys_boards.patch') diff --git a/target/linux/mvebu/patches-4.1/000-new_linksys_boards.patch b/target/linux/mvebu/patches-4.1/000-new_linksys_boards.patch deleted file mode 100644 index 7a9bfed0e4..0000000000 --- a/target/linux/mvebu/patches-4.1/000-new_linksys_boards.patch +++ /dev/null @@ -1,613 +0,0 @@ -From 3abdd583312a2830129dc42e1e3d98368a8fda47 Mon Sep 17 00:00:00 2001 -From: Imre Kaloz -Date: Wed, 20 May 2015 23:14:16 +0200 -Subject: ARM: mvebu: add support for the new Armada 385 based Linksys boards - -This patch adds support for the Linksys WRT1200AC (Caiman) and -the Linksys WRT1900AC v2 (Cobra). - -Both boards have: - -- 2 Marvell 88W8864 radios -- 1 USB 3.0 port -- 1 USB 2.0/eSATAp port -- 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN) -- 128MB NAND flash -- 512MB RAM - -gregory.clement@free-electrons.com: use serial0:115200n8 in -stdout-path and remove the bootargs part in the chosen node - -Signed-off-by: Imre Kaloz -Acked-by: Andrew Lunn -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/armada-385-linksys-caiman.dts | 114 ++++++++ - arch/arm/boot/dts/armada-385-linksys-cobra.dts | 114 ++++++++ - arch/arm/boot/dts/armada-385-linksys.dtsi | 332 ++++++++++++++++++++++++ - 4 files changed, 562 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-385-linksys-caiman.dts - create mode 100644 arch/arm/boot/dts/armada-385-linksys-cobra.dts - create mode 100644 arch/arm/boot/dts/armada-385-linksys.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -633,6 +633,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - armada-375-db.dtb - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db-ap.dtb \ -+ armada-385-linksys-caiman.dtb \ -+ armada-385-linksys-cobra.dtb \ - armada-388-db.dtb \ - armada-388-gp.dtb \ - armada-388-rd.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts -@@ -0,0 +1,114 @@ -+/* -+ * Device Tree include for the Linksys WRT1200AC (Caiman) -+ * -+ * Copyright (C) 2015 Imre Kaloz -+ * -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "armada-385-linksys.dtsi" -+ -+/ { -+ model = "Linksys WRT1200AC"; -+ compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", -+ "marvell,armada380"; -+ -+ soc { -+ internal-regs{ -+ i2c@11000 { -+ -+ pca9635@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wan_amber@0 { -+ label = "caiman:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ wan_white@1 { -+ label = "caiman:white:wan"; -+ reg = <0x1>; -+ }; -+ -+ wlan_2g@2 { -+ label = "caiman:white:wlan_2g"; -+ reg = <0x2>; -+ }; -+ -+ wlan_5g@3 { -+ label = "caiman:white:wlan_5g"; -+ reg = <0x3>; -+ }; -+ -+ usb2@5 { -+ label = "caiman:white:usb2"; -+ reg = <0x5>; -+ }; -+ -+ usb3_1@6 { -+ label = "caiman:white:usb3_1"; -+ reg = <0x6>; -+ }; -+ -+ usb3_2@7 { -+ label = "caiman:white:usb3_2"; -+ reg = <0x7>; -+ }; -+ -+ wps_white@8 { -+ label = "caiman:white:wps"; -+ reg = <0x8>; -+ }; -+ -+ wps_amber@9 { -+ label = "caiman:amber:wps"; -+ reg = <0x9>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio-leds { -+ power { -+ label = "caiman:white:power"; -+ }; -+ -+ sata { -+ label = "caiman:white:sata"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts -@@ -0,0 +1,114 @@ -+/* -+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra) -+ * -+ * Copyright (C) 2015 Imre Kaloz -+ * -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "armada-385-linksys.dtsi" -+ -+/ { -+ model = "Linksys WRT1900ACv2"; -+ compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", -+ "marvell,armada380"; -+ -+ soc { -+ internal-regs{ -+ i2c@11000 { -+ -+ pca9635@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wan_amber@0 { -+ label = "cobra:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ wan_white@1 { -+ label = "cobra:white:wan"; -+ reg = <0x1>; -+ }; -+ -+ wlan_2g@2 { -+ label = "cobra:white:wlan_2g"; -+ reg = <0x2>; -+ }; -+ -+ wlan_5g@3 { -+ label = "cobra:white:wlan_5g"; -+ reg = <0x3>; -+ }; -+ -+ usb2@5 { -+ label = "cobra:white:usb2"; -+ reg = <0x5>; -+ }; -+ -+ usb3_1@6 { -+ label = "cobra:white:usb3_1"; -+ reg = <0x6>; -+ }; -+ -+ usb3_2@7 { -+ label = "cobra:white:usb3_2"; -+ reg = <0x7>; -+ }; -+ -+ wps_white@8 { -+ label = "cobra:white:wps"; -+ reg = <0x8>; -+ }; -+ -+ wps_amber@9 { -+ label = "cobra:amber:wps"; -+ reg = <0x9>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio-leds { -+ power { -+ label = "cobra:white:power"; -+ }; -+ -+ sata { -+ label = "cobra:white:sata"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi -@@ -0,0 +1,332 @@ -+/* -+ * Device Tree include file for Armada 385 based Linksys boards -+ * -+ * Copyright (C) 2015 Imre Kaloz -+ * -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include -+#include -+#include "armada-385.dtsi" -+ -+/ { -+ model = "Linksys boards based on Armada 385"; -+ compatible = "linksys,armada385", "marvell,armada385", -+ "marvell,armada380"; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; /* 512 MB */ -+ }; -+ -+ soc { -+ ranges = ; -+ -+ internal-regs { -+ -+ spi@10600 { -+ status = "disabled"; -+ }; -+ -+ i2c@11000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ status = "okay"; -+ -+ tmp421@4c { -+ compatible = "ti,tmp421"; -+ reg = <0x4c>; -+ }; -+ -+ pca9635@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "nxp,pca9635"; -+ reg = <0x68>; -+ }; -+ }; -+ -+ /* J10: VCC, NC, RX, NC, TX, GND */ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ ethernet@70000 { -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ ethernet@34000 { -+ status = "okay"; -+ phy-mode = "sgmii"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ mdio { -+ status = "okay"; -+ }; -+ -+ sata@a8000 { -+ status = "okay"; -+ }; -+ -+ /* USB part of the eSATA/USB 2.0 port */ -+ usb@50000 { -+ status = "okay"; -+ }; -+ -+ usb3@f8000 { -+ status = "okay"; -+ usb-phy = <&usb3_phy>; -+ }; -+ -+ flash@d0000 { -+ status = "okay"; -+ num-cs = <1>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0000000 0x200000>; /* 2MB */ -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "u_env"; -+ reg = <0x200000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@140000 { -+ label = "s_env"; -+ reg = <0x240000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@900000 { -+ label = "devinfo"; -+ reg = <0x900000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ /* kernel1 overlaps with rootfs1 by design */ -+ partition@a00000 { -+ label = "kernel1"; -+ reg = <0xa00000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@1000000 { -+ label = "rootfs1"; -+ reg = <0x1000000 0x2200000>; /* 34MB */ -+ }; -+ -+ /* kernel2 overlaps with rootfs2 by design */ -+ partition@3200000 { -+ label = "kernel2"; -+ reg = <0x3200000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@3800000 { -+ label = "rootfs2"; -+ reg = <0x3800000 0x2200000>; /* 34MB */ -+ }; -+ -+ /* -+ * 38MB, last MB is for the BBT, not writable -+ */ -+ partition@5a00000 { -+ label = "syscfg"; -+ reg = <0x5a00000 0x2600000>; -+ }; -+ -+ /* -+ * Unused area between "s_env" and "devinfo". -+ * Moved here because otherwise the renumbered -+ * partitions would break the bootloader -+ * supplied bootargs -+ */ -+ partition@180000 { -+ label = "unused_area"; -+ reg = <0x280000 0x680000>; /* 6.5MB */ -+ }; -+ }; -+ }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ /* Marvell 88W8864, 5GHz-only */ -+ status = "okay"; -+ }; -+ -+ pcie@2,0 { -+ /* Marvell 88W8864, 2GHz-only */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ usb3_phy: usb3_phy { -+ compatible = "usb-nop-xceiv"; -+ vcc-supply = <®_xhci0_vbus>; -+ }; -+ -+ reg_xhci0_vbus: xhci0-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&xhci0_vbus_pins>; -+ regulator-name = "xhci0-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&keys_pin>; -+ pinctrl-names = "default"; -+ -+ button@1 { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -+ }; -+ -+ button@2 { -+ label = "Factory Reset Button"; -+ linux,code = ; -+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&power_led_pin &sata_led_pin>; -+ pinctrl-names = "default"; -+ -+ power { -+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ -+ sata { -+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ }; -+ }; -+ -+ dsa@0 { -+ compatible = "marvell,dsa"; -+ #address-cells = <2>; -+ #size-cells = <0>; -+ -+ dsa,ethernet = <ð2>; -+ dsa,mii-bus = <&mdio>; -+ -+ switch@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ -+ -+ port@0 { -+ reg = <0>; -+ label = "lan4"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan3"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan1"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "cpu"; -+ }; -+ }; -+ }; -+}; -+ -+&pinctrl { -+ keys_pin: keys-pin { -+ marvell,pins = "mpp24", "mpp47"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp55"; -+ marvell,function = "gpio"; -+ }; -+ -+ sata_led_pin: sata-led-pin { -+ marvell,pins = "mpp54"; -+ marvell,function = "gpio"; -+ }; -+ -+ xhci0_vbus_pins: xhci0-vbus-pins { -+ marvell,pins = "mpp50"; -+ marvell,function = "gpio"; -+ }; -+}; -- cgit v1.2.3