From 88ddb3746188037afd38d631f7a893587fa8bdf0 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 11 Feb 2015 10:09:23 +0000 Subject: ipq806x: update target to v3.18 Patches in the ipq806x/patches folder were out of tree in v3.14. The newest patch at the time was from June, so we can safely assume that either the patches have been merged, or they have been rejected for a good reason. If patches are seen missing, we'll cherry-pick them on a per-needed basis. This new kernel have been tested on AP148, which seems to works fine. Signed-off-by: Mathieu Olivari SVN-Revision: 44386 --- ...m-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch | 249 --------------------- 1 file changed, 249 deletions(-) delete mode 100644 target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch (limited to 'target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch') diff --git a/target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch b/target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch deleted file mode 100644 index fb2910b749..0000000000 --- a/target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 07d7d95706c1bf373bd6b30c42f95c7b8dc8b9ce Mon Sep 17 00:00:00 2001 -From: Kumar Gala -Date: Thu, 3 Apr 2014 14:48:22 -0500 -Subject: [PATCH 094/182] ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 - board device trees - -Add basic APQ8064 SoC include device tree and support for basic booting on -the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted -order. - -Signed-off-by: Kumar Gala ---- - arch/arm/boot/dts/Makefile | 8 +- - arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 16 +++ - arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi | 1 + - arch/arm/boot/dts/qcom-apq8064.dtsi | 170 ++++++++++++++++++++++++++++ - arch/arm/mach-qcom/board.c | 3 +- - 5 files changed, 194 insertions(+), 4 deletions(-) - create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts - create mode 100644 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi - create mode 100644 arch/arm/boot/dts/qcom-apq8064.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -231,9 +231,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 - dra7-evm.dtb - dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb - dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb --dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ -- qcom-msm8960-cdp.dtb \ -- qcom-apq8074-dragonboard.dtb -+dtb-$(CONFIG_ARCH_QCOM) += \ -+ qcom-apq8064-ifc6410.dtb \ -+ qcom-apq8074-dragonboard.dtb \ -+ qcom-msm8660-surf.dtb \ -+ qcom-msm8960-cdp.dtb - dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60-stuib.dtb \ - ste-hrefprev60-tvk.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts -@@ -0,0 +1,16 @@ -+#include "qcom-apq8064-v2.0.dtsi" -+ -+/ { -+ model = "Qualcomm APQ8064/IFC6410"; -+ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; -+ -+ soc { -+ gsbi@16600000 { -+ status = "ok"; -+ qcom,mode = ; -+ serial@16640000 { -+ status = "ok"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi -@@ -0,0 +1 @@ -+#include "qcom-apq8064.dtsi" ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi -@@ -0,0 +1,170 @@ -+/dts-v1/; -+ -+#include "skeleton.dtsi" -+#include -+#include -+ -+/ { -+ model = "Qualcomm APQ8064"; -+ compatible = "qcom,apq8064"; -+ interrupt-parent = <&intc>; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ compatible = "qcom,krait"; -+ enable-method = "qcom,kpss-acc-v1"; -+ device_type = "cpu"; -+ reg = <0>; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc0>; -+ qcom,saw = <&saw0>; -+ }; -+ -+ cpu@1 { -+ compatible = "qcom,krait"; -+ enable-method = "qcom,kpss-acc-v1"; -+ device_type = "cpu"; -+ reg = <1>; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc1>; -+ qcom,saw = <&saw1>; -+ }; -+ -+ cpu@2 { -+ compatible = "qcom,krait"; -+ enable-method = "qcom,kpss-acc-v1"; -+ device_type = "cpu"; -+ reg = <2>; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc2>; -+ qcom,saw = <&saw2>; -+ }; -+ -+ cpu@3 { -+ compatible = "qcom,krait"; -+ enable-method = "qcom,kpss-acc-v1"; -+ device_type = "cpu"; -+ reg = <3>; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc3>; -+ qcom,saw = <&saw3>; -+ }; -+ -+ L2: l2-cache { -+ compatible = "cache"; -+ cache-level = <2>; -+ }; -+ }; -+ -+ cpu-pmu { -+ compatible = "qcom,krait-pmu"; -+ interrupts = <1 10 0x304>; -+ }; -+ -+ soc: soc { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ compatible = "simple-bus"; -+ -+ intc: interrupt-controller@2000000 { -+ compatible = "qcom,msm-qgic2"; -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ reg = <0x02000000 0x1000>, -+ <0x02002000 0x1000>; -+ }; -+ -+ timer@200a000 { -+ compatible = "qcom,kpss-timer", "qcom,msm-timer"; -+ interrupts = <1 1 0x301>, -+ <1 2 0x301>, -+ <1 3 0x301>; -+ reg = <0x0200a000 0x100>; -+ clock-frequency = <27000000>, -+ <32768>; -+ cpu-offset = <0x80000>; -+ }; -+ -+ acc0: clock-controller@2088000 { -+ compatible = "qcom,kpss-acc-v1"; -+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>; -+ }; -+ -+ acc1: clock-controller@2098000 { -+ compatible = "qcom,kpss-acc-v1"; -+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; -+ }; -+ -+ acc2: clock-controller@20a8000 { -+ compatible = "qcom,kpss-acc-v1"; -+ reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; -+ }; -+ -+ acc3: clock-controller@20b8000 { -+ compatible = "qcom,kpss-acc-v1"; -+ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; -+ }; -+ -+ saw0: regulator@2089000 { -+ compatible = "qcom,saw2"; -+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>; -+ regulator; -+ }; -+ -+ saw1: regulator@2099000 { -+ compatible = "qcom,saw2"; -+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>; -+ regulator; -+ }; -+ -+ saw2: regulator@20a9000 { -+ compatible = "qcom,saw2"; -+ reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; -+ regulator; -+ }; -+ -+ saw3: regulator@20b9000 { -+ compatible = "qcom,saw2"; -+ reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; -+ regulator; -+ }; -+ -+ gsbi7: gsbi@16600000 { -+ status = "disabled"; -+ compatible = "qcom,gsbi-v1.0.0"; -+ reg = <0x16600000 0x100>; -+ clocks = <&gcc GSBI7_H_CLK>; -+ clock-names = "iface"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ serial@16640000 { -+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; -+ reg = <0x16640000 0x1000>, -+ <0x16600000 0x1000>; -+ interrupts = <0 158 0x0>; -+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; -+ clock-names = "core", "iface"; -+ status = "disabled"; -+ }; -+ }; -+ -+ qcom,ssbi@500000 { -+ compatible = "qcom,ssbi"; -+ reg = <0x00500000 0x1000>; -+ qcom,controller-type = "pmic-arbiter"; -+ }; -+ -+ gcc: clock-controller@900000 { -+ compatible = "qcom,gcc-apq8064"; -+ reg = <0x00900000 0x4000>; -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ }; -+ }; -+}; ---- a/arch/arm/mach-qcom/board.c -+++ b/arch/arm/mach-qcom/board.c -@@ -15,9 +15,10 @@ - #include - - static const char * const qcom_dt_match[] __initconst = { -+ "qcom,apq8064", -+ "qcom,apq8074-dragonboard", - "qcom,msm8660-surf", - "qcom,msm8960-cdp", -- "qcom,apq8074-dragonboard", - NULL - }; - -- cgit v1.2.3