From 4f88f8de81407f05b9eddd550d0b201296d75886 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Apr 2009 15:47:46 +0000 Subject: brcm47xx: remove 2.6.25 support SVN-Revision: 15448 --- .../patches-2.6.25/100-board_support.patch | 46 - .../brcm47xx/patches-2.6.25/110-flash_map.patch | 25 - .../patches-2.6.25/130-remove_scache.patch | 89 -- .../brcm47xx/patches-2.6.25/150-cpu_fixes.patch | 365 ------ .../patches-2.6.25/160-kmap_coherent.patch | 77 -- .../brcm47xx/patches-2.6.25/210-b44_phy_fix.patch | 31 - .../patches-2.6.25/211-b44_bcm4713_phy.patch | 14 - .../patches-2.6.25/212-b44_alignment_fix.patch | 48 - .../brcm47xx/patches-2.6.25/220-bcm5354.patch | 42 - .../patches-2.6.25/250-ohci-ssb-usb2.patch | 72 -- .../patches-2.6.25/260-ohci-set-dma-mask.patch | 14 - .../patches-2.6.25/300-fork_cacheflush.patch | 11 - .../brcm47xx/patches-2.6.25/310-no_highpage.patch | 68 -- .../brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch | 372 ------ .../patches-2.6.25/500-lzma_initramfs.patch | 117 -- .../601-mips-remove-pci-collision-check.patch | 22 - .../patches-2.6.25/620-ssb-modinit-fix.patch | 13 - .../patches-2.6.25/630-ssb-fix-irq-init.patch | 24 - .../680-ssb-support-8bit-writes.patch | 189 --- .../690-mips-allow-pciregister-after-boot.patch | 159 --- .../700-ssb-gigabit-ethernet-driver.patch | 1231 -------------------- .../patches-2.6.25/710-add-gpio-is-valid.patch | 38 - .../patches-2.6.25/800-fix_cfe_detection.patch | 108 -- 23 files changed, 3175 deletions(-) delete mode 100644 target/linux/brcm47xx/patches-2.6.25/100-board_support.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch delete mode 100644 target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch (limited to 'target/linux/brcm47xx/patches-2.6.25') diff --git a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch deleted file mode 100644 index b48215d3cc..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/100-board_support.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -50,8 +50,10 @@ config BCM47XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SSB -+ select SSB_SERIAL - select SSB_DRIVER_MIPS - select SSB_DRIVER_EXTIF -+ select SSB_DRIVER_PCICORE - select SSB_PCICORE_HOSTMODE if PCI - select GENERIC_GPIO - select SYS_HAS_EARLY_PRINTK -@@ -790,6 +792,7 @@ config CSRC_SB1250 - - config CFE - bool -+ # Common Firmware Environment - - config DMA_COHERENT - bool ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -94,6 +94,12 @@ - #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ - #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -+/* -+ * Valid machtype for group Broadcom -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom */ -+#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -2001,6 +2001,7 @@ - #define PCI_DEVICE_ID_TIGON3_5906M 0x1713 - #define PCI_DEVICE_ID_BCM4401 0x4401 - #define PCI_DEVICE_ID_BCM4401B0 0x4402 -+#define PCI_DEVICE_ID_BCM4713 0x4713 - - #define PCI_VENDOR_ID_TOPIC 0x151f - #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 diff --git a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch deleted file mode 100644 index 6d3161c86d..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/110-flash_map.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -337,6 +337,12 @@ config MTD_CFI_FLAGADM - Mapping for the Flaga digital module. If you don't have one, ignore - this setting. - -+config MTD_BCM47XX -+ tristate "BCM47xx flash device" -+ depends on MIPS && MTD_CFI && BCM47XX -+ help -+ Support for the flash chips on the BCM947xx board. -+ - config MTD_WALNUT - tristate "Flash device mapped on IBM 405GP Walnut" - depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcm - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o -+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o - obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o - obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o diff --git a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch deleted file mode 100644 index 941b649c7f..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/130-remove_scache.patch +++ /dev/null @@ -1,89 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -228,7 +228,6 @@ config MIPS_MALTA - select I8259 - select MIPS_BOARDS_GEN - select MIPS_BONITO64 -- select MIPS_CPU_SCACHE - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select SWAP_IO_SPACE -@@ -1421,13 +1420,6 @@ config IP22_CPU_SCACHE - bool - select BOARD_SCACHE - --# --# Support for a MIPS32 / MIPS64 style S-caches --# --config MIPS_CPU_SCACHE -- bool -- select BOARD_SCACHE -- - config R5000_CPU_SCACHE - bool - select BOARD_SCACHE ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -704,6 +704,8 @@ static inline void cpu_probe_mips(struct - break; - case PRID_IMP_25KF: - c->cputype = CPU_25KF; -+ /* Probe for L2 cache */ -+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; - break; - case PRID_IMP_34K: - c->cputype = CPU_34K; ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -1103,7 +1103,6 @@ static void __init loongson2_sc_init(voi - - extern int r5k_sc_init(void); - extern int rm7k_sc_init(void); --extern int mips_sc_init(void); - - static void __cpuinit setup_scache(void) - { -@@ -1157,29 +1156,17 @@ static void __cpuinit setup_scache(void) - #endif - - default: -- if (c->isa_level == MIPS_CPU_ISA_M32R1 || -- c->isa_level == MIPS_CPU_ISA_M32R2 || -- c->isa_level == MIPS_CPU_ISA_M64R1 || -- c->isa_level == MIPS_CPU_ISA_M64R2) { --#ifdef CONFIG_MIPS_CPU_SCACHE -- if (mips_sc_init ()) { -- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; -- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n", -- scache_size >> 10, -- way_string[c->scache.ways], c->scache.linesz); -- } --#else -- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -- panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); --#endif -- return; -- } - sc_present = 0; - } - - if (!sc_present) - return; - -+ if ((c->isa_level == MIPS_CPU_ISA_M32R1 || -+ c->isa_level == MIPS_CPU_ISA_M64R1) && -+ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); -+ - /* compute a couple of other cache variables */ - c->scache.waysize = scache_size / c->scache.ways; - ---- a/arch/mips/mm/Makefile -+++ b/arch/mips/mm/Makefile -@@ -32,6 +32,5 @@ obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex- - obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o - obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o - obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o --obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o - - EXTRA_CFLAGS += -Werror diff --git a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch deleted file mode 100644 index 58dafe5695..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/150-cpu_fixes.patch +++ /dev/null @@ -1,365 +0,0 @@ ---- a/arch/mips/kernel/genex.S -+++ b/arch/mips/kernel/genex.S -@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp) - NESTED(except_vec3_generic, 0, sp) - .set push - .set noat -+#ifdef CONFIG_BCM47XX -+ nop -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -33,6 +33,9 @@ - #include /* for run_uncached() */ - - -+/* For enabling BCM4710 cache workarounds */ -+int bcm4710 = 0; -+ - /* - * Special Variant of smp_call_function for use by cache functions: - * -@@ -97,6 +100,9 @@ static void __cpuinit r4k_blast_dcache_p - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -111,6 +117,9 @@ static void __cpuinit r4k_blast_dcache_p - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page_indexed = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -125,6 +134,9 @@ static void __cpuinit r4k_blast_dcache_s - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else - if (dc_lsize == 0) - r4k_blast_dcache = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -630,6 +642,8 @@ static void local_r4k_flush_cache_sigtra - unsigned long addr = (unsigned long) arg; - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - if (dc_lsize) - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store && scache_size) -@@ -1215,6 +1229,17 @@ static void __cpuinit coherency_setup(vo - * silly idea of putting something else there ... - */ - switch (current_cpu_type()) { -+ case CPU_BCM3302: -+ { -+ u32 cm; -+ cm = read_c0_diag(); -+ /* Enable icache */ -+ cm |= (1 << 31); -+ /* Enable dcache */ -+ cm |= (1 << 30); -+ write_c0_diag(cm); -+ } -+ break; - case CPU_R4000PC: - case CPU_R4000SC: - case CPU_R4000MC: -@@ -1254,6 +1279,15 @@ void __cpuinit r4k_cache_init(void) - break; - } - -+ /* Check if special workarounds are required */ -+#ifdef CONFIG_BCM47XX -+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+#endif -+ bcm4710 = 0; -+ - probe_pcache(); - setup_scache(); - -@@ -1303,5 +1337,13 @@ void __cpuinit r4k_cache_init(void) - build_clear_page(); - build_copy_page(); - local_r4k___flush_cache_all(NULL); -+#ifdef CONFIG_BCM47XX -+ { -+ static void (*_coherency_setup)(void); -+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); -+ _coherency_setup(); -+ } -+#else - coherency_setup(); -+#endif - } ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -677,6 +677,9 @@ static void __cpuinit build_r4000_tlb_re - /* No need for uasm_i_nop */ - } - -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ - #else -@@ -1084,6 +1087,9 @@ build_r4000_tlbchange_handler_head(u32 * - struct uasm_reloc **r, unsigned int pte, - unsigned int ptr) - { -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ - #else ---- a/include/asm-mips/r4kcache.h -+++ b/include/asm-mips/r4kcache.h -@@ -17,6 +17,20 @@ - #include - #include - -+#ifdef CONFIG_BCM47XX -+#include -+#include -+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))) -+ -+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) -+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind - static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns - static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns - static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue - } -@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns - */ - static inline void protected_flush_icache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Invalidate_I, addr); - } - -@@ -219,6 +237,7 @@ static inline void protected_flush_icach - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Writeback_Inv_D, addr); - } - -@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag - : "r" (base), \ - "i" (op)); - -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Hit_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ } -+ } -+} -+ -+ - /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ --#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ -+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ - static inline void blast_##pfx##cache##lsize(void) \ - { \ - unsigned long start = INDEX_BASE; \ -@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l - \ - __##pfx##flush_prologue \ - \ -+ war \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ -@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l - \ - __##pfx##flush_prologue \ - \ -+ war \ - do { \ - cache##lsize##_unroll32(start, hitop); \ - start += lsize * 32; \ -@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ -+ war \ -+ \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ -@@ -393,35 +460,37 @@ static inline void blast_##pfx##cache##l - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) -- --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) -+ -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) - - /* build blast_xxx_range, protected_blast_xxx_range */ --#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ - static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ - { \ - unsigned long lsize = cpu_##desc##_line_size(); \ - unsigned long addr = start & ~(lsize - 1); \ - unsigned long aend = (end - 1) & ~(lsize - 1); \ -+ war \ - \ - __##pfx##flush_prologue \ - \ - while (1) { \ -+ war2 \ - prot##cache_op(hitop, addr); \ - if (addr == aend) \ - break; \ -@@ -431,13 +500,13 @@ static inline void prot##blast_##pfx##ca - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) - /* blast_inv_dcache_range */ --__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) --__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) -+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) - - #endif /* _ASM_R4KCACHE_H */ ---- a/include/asm-mips/stackframe.h -+++ b/include/asm-mips/stackframe.h -@@ -359,6 +359,10 @@ - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set mips3 -+#ifdef CONFIG_BCM47XX -+ nop -+ nop -+#endif - eret - .set mips0 - .endm diff --git a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch deleted file mode 100644 index 5fe38aaaf6..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/160-kmap_coherent.patch +++ /dev/null @@ -1,77 +0,0 @@ ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -211,7 +211,7 @@ void copy_user_highpage(struct page *to, - void *vfrom, *vto; - - vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(from) && !Page_dcache_dirty(from)) { - vfrom = kmap_coherent(from, vaddr); - copy_page(vto, vfrom); -@@ -235,7 +235,7 @@ void copy_to_user_page(struct vm_area_st - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(page) && !Page_dcache_dirty(page)) { - void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(vto, src, len); -@@ -255,7 +255,7 @@ void copy_from_user_page(struct vm_area_ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapped(page) && !Page_dcache_dirty(page)) { - void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(dst, vfrom, len); ---- /dev/null -+++ b/include/asm-mips/mach-bcm47xx/cpu-feature-overrides.h -@@ -0,0 +1,13 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) -+ */ -+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_use_kmap_coherent 0 -+ -+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ ---- a/include/asm-mips/cpu-features.h -+++ b/include/asm-mips/cpu-features.h -@@ -101,6 +101,9 @@ - #ifndef cpu_has_pindexed_dcache - #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) - #endif -+#ifndef cpu_use_kmap_coherent -+#define cpu_use_kmap_coherent 1 -+#endif - - /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -484,7 +484,7 @@ static inline void local_r4k_flush_cache - * Use kmap_coherent or kmap_atomic to do flushes for - * another ASID than the current one. - */ -- if (cpu_has_dc_aliases) -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) - vaddr = kmap_coherent(page, addr); - else - vaddr = kmap_atomic(page, KM_USER0); -@@ -505,7 +505,7 @@ static inline void local_r4k_flush_cache - } - - if (vaddr) { -- if (cpu_has_dc_aliases) -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) - kunmap_coherent(); - else - kunmap_atomic(vaddr, KM_USER0); diff --git a/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch deleted file mode 100644 index 6669fba464..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/210-b44_phy_fix.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -339,7 +339,7 @@ static int b44_phy_reset(struct b44 *bp) - } - } - -- return 0; -+ return err; - } - - static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags) -@@ -384,7 +384,7 @@ static void b44_set_flow_ctrl(struct b44 - __b44_set_flow_ctrl(bp, pause_enab); - } - --#ifdef SSB_DRIVER_MIPS -+#ifdef CONFIG_SSB_DRIVER_MIPS - extern char *nvram_get(char *name); - static void b44_wap54g10_workaround(struct b44 *bp) - { -@@ -2211,6 +2211,10 @@ static int __devinit b44_init_one(struct - */ - b44_chip_reset(bp, B44_CHIP_RESET_FULL); - -+ /* do a phy reset to test if there is an active phy */ -+ if (b44_phy_reset(bp) < 0) -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ - printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n", - dev->name, print_mac(mac, dev->dev_addr)); - diff --git a/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch b/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch deleted file mode 100644 index 13f93bdb93..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/211-b44_bcm4713_phy.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -2094,6 +2094,11 @@ static int __devinit b44_get_invariants( - return -EINVAL; - } - -+ if (bp->sdev->id.coreid == 0x806 && bp->sdev->id.revision == 0x0) { -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ bp->dma_offset = 0; -+ } -+ - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); - - bp->imask = IMASK_DEF; diff --git a/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch b/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch deleted file mode 100644 index d65c37e442..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/212-b44_alignment_fix.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -73,8 +73,8 @@ - (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP)) - #define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1)) - --#define RX_PKT_OFFSET 30 --#define RX_PKT_BUF_SZ (1536 + RX_PKT_OFFSET + 64) -+#define RX_PKT_OFFSET (RX_HEADER_LEN + 2) -+#define RX_PKT_BUF_SZ (1536 + RX_PKT_OFFSET) - - /* minimum number of free TX descriptors required to wake up TX process */ - #define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4) -@@ -682,7 +682,6 @@ static int b44_alloc_rx_skb(struct b44 * - } - - rh = (struct rx_header *) skb->data; -- skb_reserve(skb, RX_PKT_OFFSET); - - rh->len = 0; - rh->flags = 0; -@@ -693,13 +692,13 @@ static int b44_alloc_rx_skb(struct b44 * - if (src_map != NULL) - src_map->skb = NULL; - -- ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET)); -+ ctrl = (DESC_CTRL_LEN & RX_PKT_BUF_SZ); - if (dest_idx == (B44_RX_RING_SIZE - 1)) - ctrl |= DESC_CTRL_EOT; - - dp = &bp->rx_ring[dest_idx]; - dp->ctrl = cpu_to_le32(ctrl); -- dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset); -+ dp->addr = cpu_to_le32((u32) mapping + bp->dma_offset); - - if (bp->flags & B44_FLAG_RX_RING_HACK) - b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma, -@@ -809,8 +808,8 @@ static int b44_rx(struct b44 *bp, int bu - dma_unmap_single(bp->sdev->dma_dev, map, - skb_size, DMA_FROM_DEVICE); - /* Leave out rx_header */ -- skb_put(skb, len + RX_PKT_OFFSET); -- skb_pull(skb, RX_PKT_OFFSET); -+ skb_put(skb, len + RX_PKT_OFFSET); -+ skb_pull(skb, RX_PKT_OFFSET); - } else { - struct sk_buff *copy_skb; - diff --git a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch deleted file mode 100644 index 6a4341fede..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/220-bcm5354.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco - void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { -@@ -293,6 +295,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ - void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -161,6 +161,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - - if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { - rate = 200000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 240000000; - } else { - rate = ssb_calc_clock_rate(pll_type, n, m); - } ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -867,6 +867,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) - - if (bus->chip_id == 0x5365) { - rate = 100000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 120000000; - } else { - rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); - if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ diff --git a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch deleted file mode 100644 index 856651b3de..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/250-ohci-ssb-usb2.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -142,10 +142,59 @@ static int ssb_ohci_attach(struct ssb_de - int err = -ENOMEM; - u32 tmp, flags = 0; - -- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) -+ /* -+ * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE -+ * -+ * The USB core requires a special bit to be set during core -+ * reset to enable host (OHCI) mode. Resetting the SB core in -+ * pcibios_enable_device() is a hack for compatibility with -+ * vanilla usb-ohci so that it does not have to know about -+ * SB. A driver that wants to use the USB core in device mode -+ * should know about SB and should reset the bit back to 0 -+ * after calling pcibios_enable_device(). -+ */ -+ -+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { - flags |= SSB_OHCI_TMSLOW_HOSTMODE; -+ ssb_device_enable(dev, flags); -+ } -+ -+ /* -+ * USB 2.0 special considerations: -+ * -+ * 1. Since the core supports both OHCI and EHCI functions, it must -+ * only be reset once. -+ * -+ * 2. In addition to the standard SB reset sequence, the Host Control -+ * Register must be programmed to bring the USB core and various -+ * phy components out of reset. -+ */ -+ -+ else if (dev->id.coreid == SSB_DEV_USB20_HOST) { -+#warning FIX ME need test for core being up & exit -+ ssb_device_enable(dev, 0); -+ ssb_write32(dev, 0x200, 0x7ff); -+ udelay(1); -+ if (dev->id.revision == 1) { // bug in rev 1 -+ -+ /* Change Flush control reg */ -+ tmp = ssb_read32(dev, 0x400); -+ tmp &= ~8; -+ ssb_write32(dev, 0x400, tmp); -+ tmp = ssb_read32(dev, 0x400); -+ printk("USB20H fcr: 0x%0x\n", tmp); -+ -+ /* Change Shim control reg */ -+ tmp = ssb_read32(dev, 0x304); -+ tmp &= ~0x100; -+ ssb_write32(dev, 0x304, tmp); -+ tmp = ssb_read32(dev, 0x304); -+ printk("USB20H shim: 0x%0x\n", tmp); -+ } -+ } -+ else -+ ssb_device_enable(dev, 0); - -- ssb_device_enable(dev, flags); - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev->dev->bus_id); -@@ -236,6 +285,7 @@ static int ssb_ohci_resume(struct ssb_de - static const struct ssb_device_id ssb_ohci_table[] = { - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), - SSB_DEVTABLE_END - }; - MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); diff --git a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch deleted file mode 100644 index afeec9c69f..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/260-ohci-set-dma-mask.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -195,6 +195,11 @@ static int ssb_ohci_attach(struct ssb_de - else - ssb_device_enable(dev, 0); - -+ /* -+ * Set dma mask - 32 bit mask is just an assumption -+ */ -+ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK)) -+ return -EOPNOTSUPP; - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev->dev->bus_id); diff --git a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch deleted file mode 100644 index f5b5d77682..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/300-fork_cacheflush.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/asm-mips/cacheflush.h -+++ b/include/asm-mips/cacheflush.h -@@ -32,7 +32,7 @@ - extern void (*flush_cache_all)(void); - extern void (*__flush_cache_all)(void); - extern void (*flush_cache_mm)(struct mm_struct *mm); --#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - extern void (*flush_cache_range)(struct vm_area_struct *vma, - unsigned long start, unsigned long end); - extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch deleted file mode 100644 index 505e8aa4d5..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/310-no_highpage.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -205,32 +205,6 @@ void kunmap_coherent(void) - preempt_check_resched(); - } - --void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma) --{ -- void *vfrom, *vto; -- -- vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && -- page_mapped(from) && !Page_dcache_dirty(from)) { -- vfrom = kmap_coherent(from, vaddr); -- copy_page(vto, vfrom); -- kunmap_coherent(); -- } else { -- vfrom = kmap_atomic(from, KM_USER0); -- copy_page(vto, vfrom); -- kunmap_atomic(vfrom, KM_USER0); -- } -- if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) || -- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -- flush_data_cache_page((unsigned long)vto); -- kunmap_atomic(vto, KM_USER1); -- /* Make sure this page is cleared on other CPU's too before using it */ -- smp_wmb(); --} -- --EXPORT_SYMBOL(copy_user_highpage); -- - void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) ---- a/include/asm-mips/page.h -+++ b/include/asm-mips/page.h -@@ -32,6 +32,7 @@ - #ifndef __ASSEMBLY__ - - #include -+#include - #include - - /* -@@ -64,13 +65,16 @@ static inline void clear_user_page(void - flush_data_cache_page((unsigned long)addr); - } - --extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -- struct page *to); --struct vm_area_struct; --extern void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma); -+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -+ struct page *to) -+{ -+ extern void (*flush_data_cache_page)(unsigned long addr); - --#define __HAVE_ARCH_COPY_USER_HIGHPAGE -+ copy_page(vto, vfrom); -+ if (!cpu_has_ic_fills_f_dc || -+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -+ flush_data_cache_page((unsigned long)vto); -+} - - /* - * These are used to make use of C type-checking.. diff --git a/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch deleted file mode 100644 index 7153871d21..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/400-arch-bcm47xx.patch +++ /dev/null @@ -1,372 +0,0 @@ ---- a/arch/mips/bcm47xx/irq.c -+++ b/arch/mips/bcm47xx/irq.c -@@ -1,5 +1,6 @@ - /* - * Copyright (C) 2004 Florian Schirmer -+ * Copyright (C) 2008 Michael Buesch - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the -@@ -23,10 +24,19 @@ - */ - - #include -+#include -+#include - #include - #include -+#include -+#include -+ - #include - -+ -+extern struct ssb_bus ssb_bcm47xx; -+ -+ - void plat_irq_dispatch(void) - { - u32 cause; -@@ -53,3 +63,19 @@ void __init arch_init_irq(void) - { - mips_cpu_irq_init(); - } -+ -+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int res; -+ -+ res = ssb_pcibios_map_irq(dev, slot, pin); -+ if (res < 0) { -+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", -+ dev->dev.bus_id); -+ return 0; -+ } -+ /* IRQ-0 and IRQ-1 are software interrupts. */ -+ WARN_ON((res == 0) || (res == 1)); -+ -+ return res; -+} ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -2,7 +2,7 @@ - * Copyright (C) 2004 Florian Schirmer - * Copyright (C) 2005 Waldemar Brodkorb - * Copyright (C) 2006 Felix Fietkau -- * Copyright (C) 2006 Michael Buesch -+ * Copyright (C) 2006-2008 Michael Buesch - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the -@@ -25,23 +25,52 @@ - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -+#include - #include --#include -+#include -+#include -+#include -+#include -+#include - #include --#include - #include --#include -+#include - #include -+#include -+#include -+#include -+ -+#include "include/nvram.h" - - struct ssb_bus ssb_bcm47xx; - EXPORT_SYMBOL(ssb_bcm47xx); - -+extern void bcm47xx_pci_init(void); -+ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ int err; -+ -+ err = ssb_pcibios_plat_dev_init(dev); -+ if (err) { -+ printk(KERN_ALERT "PCI: Failed to init device %s\n", -+ pci_name(dev)); -+ } -+ -+ return err; -+} -+ - static void bcm47xx_machine_restart(char *command) - { - printk(KERN_ALERT "Please stand by while rebooting the system...\n"); - local_irq_disable(); -+ /* CFE has a reboot callback, but that does not work. -+ * Oopses with: Reserved instruction in kernel code. -+ */ -+ - /* Set the watchdog timer to reset immediately */ -- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1); -+ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 1)) -+ printk(KERN_EMERG "SSB watchdog-triggered reboot failed!\n"); - while (1) - cpu_relax(); - } -@@ -50,12 +79,13 @@ static void bcm47xx_machine_halt(void) - { - /* Disable interrupts and watchdog and spin forever */ - local_irq_disable(); -- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0); -+ if (ssb_watchdog_timer_set(&ssb_bcm47xx, 0)) -+ printk(KERN_EMERG "Failed to disable SSB watchdog!\n"); - while (1) - cpu_relax(); - } - --static void str2eaddr(char *str, char *dest) -+static void e_aton(char *str, char *dest) - { - int i = 0; - -@@ -72,52 +102,141 @@ static void str2eaddr(char *str, char *d - } - } - --static int bcm47xx_get_invariants(struct ssb_bus *bus, -- struct ssb_init_invariants *iv) -+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) - { -- char buf[100]; -+ char *s; - -- /* Fill boardinfo structure */ -- memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); -+ memset(sprom, 0xFF, sizeof(struct ssb_sprom)); - -- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0) -- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); -- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0) -- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); -- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0) -- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); -- -- /* Fill sprom structure */ -- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); -- iv->sprom.revision = 3; -- -- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0) -- str2eaddr(buf, iv->sprom.et0mac); -- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0) -- str2eaddr(buf, iv->sprom.et1mac); -- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) -- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10); -- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) -- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10); -- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0) -- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); -- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0) -- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); -+ sprom->revision = 1; -+ if ((s = nvram_get("il0macaddr"))) -+ e_aton(s, sprom->il0mac); -+ if ((s = nvram_get("et0macaddr"))) -+ e_aton(s, sprom->et0mac); -+ if ((s = nvram_get("et1macaddr"))) -+ e_aton(s, sprom->et1mac); -+ if ((s = nvram_get("et0phyaddr"))) -+ sprom->et0phyaddr = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("et1phyaddr"))) -+ sprom->et1phyaddr = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("et0mdcport"))) -+ sprom->et0mdcport = !!simple_strtoul(s, NULL, 10); -+ if ((s = nvram_get("et1mdcport"))) -+ sprom->et1mdcport = !!simple_strtoul(s, NULL, 10); -+ if ((s = nvram_get("pa0b0"))) -+ sprom->pa0b0 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa0b1"))) -+ sprom->pa0b1 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa0b2"))) -+ sprom->pa0b2 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa1b0"))) -+ sprom->pa1b0 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa1b1"))) -+ sprom->pa1b1 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa1b2"))) -+ sprom->pa1b2 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("wl0gpio0"))) -+ sprom->gpio0 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("wl0gpio1"))) -+ sprom->gpio1 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("wl0gpio2"))) -+ sprom->gpio2 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("wl0gpio3"))) -+ sprom->gpio3 = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa0maxpwr"))) -+ sprom->maxpwr_bg = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa1maxpwr"))) -+ sprom->maxpwr_a = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa0itssit"))) -+ sprom->itssi_bg = simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("pa1itssit"))) -+ sprom->itssi_a = simple_strtoul(s, NULL, 0); -+ sprom->boardflags_lo = 0; -+ if ((s = nvram_get("boardflags"))) -+ sprom->boardflags_lo = simple_strtoul(s, NULL, 0); -+ sprom->boardflags_hi = 0; -+ if ((s = nvram_get("boardflags2"))) -+ sprom->boardflags_hi = simple_strtoul(s, NULL, 0); -+} -+ -+static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) -+{ -+ char *s; -+ -+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; -+ if ((s = nvram_get("boardtype"))) -+ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0); -+ if ((s = nvram_get("boardrev"))) -+ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0); -+ -+ bcm47xx_fill_sprom(&iv->sprom); -+ -+ if ((s = nvram_get("cardbus"))) -+ iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10); - - return 0; - } - - void __init plat_mem_setup(void) - { -- int err; -+ int i, err; -+ char *s; -+ struct ssb_mipscore *mcore; -+ -+ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); -+ if (err) { -+ const char *msg = "Failed to initialize SSB bus (err %d)\n"; -+ printk(msg, err); /* Make sure the message gets out of the box. */ -+ panic(msg, err); -+ } -+ mcore = &ssb_bcm47xx.mipscore; -+ -+ s = nvram_get("kernel_args"); -+ if (s && !strncmp(s, "console=ttyS1", 13)) { -+ struct ssb_serial_port port; -+ -+ printk("Swapping serial ports!\n"); -+ /* swap serial ports */ -+ memcpy(&port, &mcore->serial_ports[0], sizeof(port)); -+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port)); -+ memcpy(&mcore->serial_ports[1], &port, sizeof(port)); -+ } - -- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, -- bcm47xx_get_invariants); -- if (err) -- panic("Failed to initialize SSB bus (err %d)\n", err); -+ for (i = 0; i < mcore->nr_serial_ports; i++) { -+ struct ssb_serial_port *port = &(mcore->serial_ports[i]); -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ s.line = i; -+ s.membase = port->regs; -+ s.irq = port->irq + 2; -+ s.uartclk = port->baud_base; -+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = port->reg_shift; -+ -+ early_serial_setup(&s); -+ } -+ printk("Serial init done.\n"); - - _machine_restart = bcm47xx_machine_restart; - _machine_halt = bcm47xx_machine_halt; - pm_power_off = bcm47xx_machine_halt; - } - -+static int __init bcm47xx_register_gpiodev(void) -+{ -+ static struct resource res = { -+ .start = 0xFFFFFFFF, -+ }; -+ struct platform_device *pdev; -+ -+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); -+ if (!pdev) { -+ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n"); -+ return -ENODEV; -+ } -+ -+ return 0; -+} -+device_initcall(bcm47xx_register_gpiodev); ---- a/arch/mips/bcm47xx/time.c -+++ b/arch/mips/bcm47xx/time.c -@@ -22,11 +22,17 @@ - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -- - #include -+#include -+#include -+#include -+#include - #include -+#include -+#include - #include --#include -+ -+extern struct ssb_bus ssb_bcm47xx; - - void __init plat_time_init(void) - { ---- a/arch/mips/bcm47xx/nvram.c -+++ b/arch/mips/bcm47xx/nvram.c -@@ -24,10 +24,10 @@ - #include - #include - --#include -+#include "include/nvram.h" - - #define MB * 1048576 --extern struct ssb_bus ssb; -+extern struct ssb_bus ssb_bcm47xx; - - static char nvram_buf[NVRAM_SPACE]; - static int cfe_env; -@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c - /* Probe for NVRAM header */ - static void __init early_nvram_init(void) - { -- struct ssb_mipscore *mcore = &ssb.mipscore; -+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; - struct nvram_header *header; - int i; - u32 base, lim, off; ---- a/arch/mips/bcm47xx/Makefile -+++ b/arch/mips/bcm47xx/Makefile -@@ -3,4 +3,4 @@ - # under Linux. - # - --obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o -+obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -54,6 +54,7 @@ config BCM47XX - select SSB_DRIVER_MIPS - select SSB_DRIVER_EXTIF - select SSB_DRIVER_PCICORE -+ select SSB_B43_PCI_BRIDGE - select SSB_PCICORE_HOSTMODE if PCI - select GENERIC_GPIO - select SYS_HAS_EARLY_PRINTK diff --git a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch b/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch deleted file mode 100644 index 59f4c1fdb3..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/500-lzma_initramfs.patch +++ /dev/null @@ -1,117 +0,0 @@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- cat ${cpio_tfile} | gzip -f -9 - > ${output_file} -+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file} - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} - fi ---- a/init/initramfs.c -+++ b/init/initramfs.c -@@ -441,6 +441,69 @@ static void __init flush_window(void) - outcnt = 0; - } - -+#include -+static int __init lzma_unzip(void) -+{ -+ unsigned int i; /* temp value */ -+ unsigned int lc; /* literal context bits */ -+ unsigned int lp; /* literal pos state bits */ -+ unsigned int pb; /* pos state bits */ -+ unsigned int osize; /* uncompressed size */ -+ unsigned char *workspace; -+ unsigned char* outputbuffer; -+ unsigned int outsizeProcessed = 0; -+ int workspace_size; -+ int res; -+ -+ // lzma args -+ i = get_byte(); -+ lc = i % 9, i = i / 9; -+ lp = i % 5, pb = i / 5; -+ -+ // skip dictionary size -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ /* read the lower half of uncompressed size in the header */ -+ osize = ((unsigned int)get_byte()) + -+ ((unsigned int)get_byte() << 8) + -+ ((unsigned int)get_byte() << 16) + -+ ((unsigned int)get_byte() << 24); -+ -+ /* skip rest of the header (upper half of uncompressed size) */ -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100; -+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n", -+ lc,lp,pb,osize); -+ outputbuffer = kmalloc(osize, GFP_KERNEL); -+ if (outputbuffer == 0) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n"); -+ return -1; -+ } -+ -+ workspace = kmalloc(workspace_size, GFP_KERNEL); -+ if (workspace == NULL) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n"); -+ return -1; -+ } -+ -+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed); -+ if( res != 0 ) { -+ panic( KERN_ERR "initramfs: Lzma decode failure\n"); -+ return -1; -+ } -+ -+ flush_buffer(outputbuffer, outsizeProcessed); -+ inptr = insize; -+ -+ kfree(outputbuffer); -+ kfree(workspace); -+ state = Reset; -+ return 0; -+} -+ - static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) - { - int written; -@@ -475,12 +538,28 @@ static char * __init unpack_to_rootfs(ch - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; -- crc = (ulg)0xffffffffL; /* shift register contents */ -- makecrc(); -- gunzip(); -- if (state != Reset) -+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236))) -+ { -+ printk( KERN_NOTICE "detected gzip initramfs\n"); -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ if (state != Reset) - error("junk in gzipped archive"); -- this_header = saved_offset + inptr; -+ } -+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */ -+ { -+ printk( KERN_NOTICE "detected lzma initramfs\n"); -+ lzma_unzip(); -+ } -+ else -+ { -+ // skip forward ? -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ } -+ this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; - } diff --git a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch deleted file mode 100644 index 9071b7cb34..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/601-mips-remove-pci-collision-check.patch +++ /dev/null @@ -1,22 +0,0 @@ -The SSB pcicore driver does create some MMIO resource collisions. -However, the pcicore PCI-fixup routine fixes these collisions afterwards. -Remove this sanity check for now until we find a better solution. ---mb ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -182,12 +182,10 @@ static int pcibios_enable_resources(stru - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; -- if (!r->start && r->end) { -- printk(KERN_ERR "PCI: Device %s not available " -- "because of resource collisions\n", -+ if (!r->start && r->end) -+ printk(KERN_WARNING "PCI: Device %s resource" -+ "collisions detected. Ignoring...\n", - pci_name(dev)); -- return -EINVAL; -- } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) diff --git a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch b/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch deleted file mode 100644 index af251d5ea1..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/620-ssb-modinit-fix.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1173,7 +1173,9 @@ static int __init ssb_modinit(void) - /* ssb must be initialized after PCI but before the ssb drivers. - * That means we must use some initcall between subsys_initcall - * and device_initcall. */ --fs_initcall(ssb_modinit); -+//FIXME on embedded we need to be early to make sure we can register -+// a new PCI bus, if needed. -+subsys_initcall(ssb_modinit); - - static void __exit ssb_modexit(void) - { diff --git a/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch b/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch deleted file mode 100644 index 72505d3e27..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/630-ssb-fix-irq-init.patch +++ /dev/null @@ -1,24 +0,0 @@ -Subject: [OpenWrt-Devel] [PATCH] ssb-pcicore: Fix IRQ-vector init on embedded devices - -On embedded devices we must not route the interrupts through -the PCI core, if our host-bus is not PCI. - -Reported-by: Steve Brown -Signed-off-by: Michael Buesch - ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -519,6 +519,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc - int err = 0; - u32 tmp; - -+ if (dev->bus->bustype != SSB_BUSTYPE_PCI) { -+ /* This SSB device is not on a PCI host-bus. So the IRQs are -+ * not routed through the PCI core. -+ * So we must not enable routing through the PCI core. */ -+ goto out; -+ } -+ - if (!pdev) - goto out; - bus = pdev->bus; diff --git a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch b/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch deleted file mode 100644 index f96b4d2dab..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/680-ssb-support-8bit-writes.patch +++ /dev/null @@ -1,189 +0,0 @@ -Add support for 8bit reads/writes to SSB. ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -508,6 +508,14 @@ error: - return err; - } - -+static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ offset += dev->core_index * SSB_CORE_SIZE; -+ return readb(bus->mmio + offset); -+} -+ - static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -524,6 +532,14 @@ static u32 ssb_ssb_read32(struct ssb_dev - return readl(bus->mmio + offset); - } - -+static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ offset += dev->core_index * SSB_CORE_SIZE; -+ writeb(value, bus->mmio + offset); -+} -+ - static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -542,8 +558,10 @@ static void ssb_ssb_write32(struct ssb_d - - /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ - static const struct ssb_bus_ops ssb_ssb_ops = { -+ .read8 = ssb_ssb_read8, - .read16 = ssb_ssb_read16, - .read32 = ssb_ssb_read32, -+ .write8 = ssb_ssb_write8, - .write16 = ssb_ssb_write16, - .write32 = ssb_ssb_write32, - }; ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -577,6 +577,19 @@ static inline int ssb_pci_assert_buspowe - } - #endif /* DEBUG */ - -+static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ if (unlikely(ssb_pci_assert_buspower(bus))) -+ return 0xFF; -+ if (unlikely(bus->mapped_device != dev)) { -+ if (unlikely(ssb_pci_switch_core(bus, dev))) -+ return 0xFF; -+ } -+ return ioread8(bus->mmio + offset); -+} -+ - static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -603,6 +616,19 @@ static u32 ssb_pci_read32(struct ssb_dev - return ioread32(bus->mmio + offset); - } - -+static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ if (unlikely(ssb_pci_assert_buspower(bus))) -+ return; -+ if (unlikely(bus->mapped_device != dev)) { -+ if (unlikely(ssb_pci_switch_core(bus, dev))) -+ return; -+ } -+ iowrite8(value, bus->mmio + offset); -+} -+ - static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -631,8 +657,10 @@ static void ssb_pci_write32(struct ssb_d - - /* Not "static", as it's used in main.c */ - const struct ssb_bus_ops ssb_pci_ops = { -+ .read8 = ssb_pci_read8, - .read16 = ssb_pci_read16, - .read32 = ssb_pci_read32, -+ .write8 = ssb_pci_write8, - .write16 = ssb_pci_write16, - .write32 = ssb_pci_write32, - }; ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -172,6 +172,22 @@ static int select_core_and_segment(struc - return 0; - } - -+static u8 ssb_pcmcia_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ unsigned long flags; -+ int err; -+ u8 value = 0xFF; -+ -+ spin_lock_irqsave(&bus->bar_lock, flags); -+ err = select_core_and_segment(dev, &offset); -+ if (likely(!err)) -+ value = readb(bus->mmio + offset); -+ spin_unlock_irqrestore(&bus->bar_lock, flags); -+ -+ return value; -+} -+ - static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -206,6 +222,20 @@ static u32 ssb_pcmcia_read32(struct ssb_ - return (lo | (hi << 16)); - } - -+static void ssb_pcmcia_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ unsigned long flags; -+ int err; -+ -+ spin_lock_irqsave(&bus->bar_lock, flags); -+ err = select_core_and_segment(dev, &offset); -+ if (likely(!err)) -+ writeb(value, bus->mmio + offset); -+ mmiowb(); -+ spin_unlock_irqrestore(&bus->bar_lock, flags); -+} -+ - static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -238,8 +268,10 @@ static void ssb_pcmcia_write32(struct ss - - /* Not "static", as it's used in main.c */ - const struct ssb_bus_ops ssb_pcmcia_ops = { -+ .read8 = ssb_pcmcia_read8, - .read16 = ssb_pcmcia_read16, - .read32 = ssb_pcmcia_read32, -+ .write8 = ssb_pcmcia_write8, - .write16 = ssb_pcmcia_write16, - .write32 = ssb_pcmcia_write32, - }; ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -72,8 +72,10 @@ struct ssb_device; - /* Lowlevel read/write operations on the device MMIO. - * Internal, don't use that outside of ssb. */ - struct ssb_bus_ops { -+ u8 (*read8)(struct ssb_device *dev, u16 offset); - u16 (*read16)(struct ssb_device *dev, u16 offset); - u32 (*read32)(struct ssb_device *dev, u16 offset); -+ void (*write8)(struct ssb_device *dev, u16 offset, u8 value); - void (*write16)(struct ssb_device *dev, u16 offset, u16 value); - void (*write32)(struct ssb_device *dev, u16 offset, u32 value); - }; -@@ -348,6 +350,10 @@ void ssb_device_disable(struct ssb_devic - - - /* Device MMIO register read/write functions. */ -+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) -+{ -+ return dev->ops->read8(dev, offset); -+} - static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) - { - return dev->ops->read16(dev, offset); -@@ -356,6 +362,10 @@ static inline u32 ssb_read32(struct ssb_ - { - return dev->ops->read32(dev, offset); - } -+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ dev->ops->write8(dev, offset, value); -+} - static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) - { - dev->ops->write16(dev, offset, value); diff --git a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch deleted file mode 100644 index 8b0445f5ba..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch +++ /dev/null @@ -1,159 +0,0 @@ -Allow registering PCI devices after early boot. - -This is an ugly hack and needs to be rewritten before going upstream. ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -21,6 +21,17 @@ - */ - int pci_probe_only; - -+/* -+ * Indicate whether PCI-bios init was already done. -+ */ -+static int pcibios_init_done; -+ -+/* -+ * The currently used busnumber. -+ */ -+static int next_busno; -+static int need_domain_info; -+ - #define PCI_ASSIGN_ALL_BUSSES 1 - - unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; -@@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc - res->start = start; - } - --void __devinit register_pci_controller(struct pci_controller *hose) -+/* Most MIPS systems have straight-forward swizzling needs. */ -+ -+static inline u8 bridge_swizzle(u8 pin, u8 slot) -+{ -+ return (((pin - 1) + slot) % 4) + 1; -+} -+ -+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp) - { -+ u8 pin = *pinp; -+ -+ while (dev->bus->parent) { -+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -+ /* Move up the chain of bridges. */ -+ dev = dev->bus->self; -+ } -+ *pinp = pin; -+ -+ /* The slot is the slot of the last bridge. */ -+ return PCI_SLOT(dev->devfn); -+} -+ -+void register_pci_controller(struct pci_controller *hose) -+{ -+ struct pci_bus *bus; -+ - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { -@@ -84,9 +119,6 @@ void __devinit register_pci_controller(s - goto out; - } - -- *hose_tail = hose; -- hose_tail = &hose->next; -- - /* - * Do not panic here but later - this might hapen before console init. - */ -@@ -94,41 +126,47 @@ void __devinit register_pci_controller(s - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); - } -- return; - --out: -- printk(KERN_WARNING -- "Skipping PCI bus scan due to resource conflict\n"); --} -+ if (pcibios_init_done) { -+ //TODO - --/* Most MIPS systems have straight-forward swizzling needs. */ -+ printk(KERN_INFO "Registering a PCI bus after boot\n"); - --static inline u8 bridge_swizzle(u8 pin, u8 slot) --{ -- return (((pin - 1) + slot) % 4) + 1; --} -+ if (!hose->iommu) -+ PCI_DMA_BUS_IS_PHYS = 1; - --static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp) --{ -- u8 pin = *pinp; -+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose); -+ hose->bus = bus; -+ need_domain_info = need_domain_info || hose->index; -+ hose->need_domain_info = need_domain_info; -+ if (bus) { -+ next_busno = bus->subordinate + 1; -+ /* Don't allow 8-bit bus number overflow inside the hose - -+ reserve some space for bridges. */ -+ if (next_busno > 224) { -+ next_busno = 0; -+ need_domain_info = 1; -+ } -+ } -+ if (!pci_probe_only) -+ pci_assign_unassigned_resources(); -+ pci_fixup_irqs(common_swizzle, pcibios_map_irq); -+ } else { -+ *hose_tail = hose; -+ hose_tail = &hose->next; -+ } - -- while (dev->bus->parent) { -- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -- /* Move up the chain of bridges. */ -- dev = dev->bus->self; -- } -- *pinp = pin; -+ return; - -- /* The slot is the slot of the last bridge. */ -- return PCI_SLOT(dev->devfn); -+out: -+ printk(KERN_WARNING -+ "Skipping PCI bus scan due to resource conflict\n"); - } - - static int __init pcibios_init(void) - { - struct pci_controller *hose; - struct pci_bus *bus; -- int next_busno; -- int need_domain_info = 0; - - /* Scan all of the recorded PCI controllers. */ - for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { -@@ -157,6 +195,7 @@ static int __init pcibios_init(void) - if (!pci_probe_only) - pci_assign_unassigned_resources(); - pci_fixup_irqs(common_swizzle, pcibios_map_irq); -+ pcibios_init_done = 1; - - return 0; - } ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1191,9 +1191,7 @@ static int __init ssb_modinit(void) - /* ssb must be initialized after PCI but before the ssb drivers. - * That means we must use some initcall between subsys_initcall - * and device_initcall. */ --//FIXME on embedded we need to be early to make sure we can register --// a new PCI bus, if needed. --subsys_initcall(ssb_modinit); -+fs_initcall(ssb_modinit); - - static void __exit ssb_modexit(void) - { diff --git a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch deleted file mode 100644 index 1ed53e5ef8..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch +++ /dev/null @@ -1,1231 +0,0 @@ ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF - - If unsure, say N - -+config SSB_DRIVER_GIGE -+ bool "SSB Broadcom Gigabit Ethernet driver" -+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS -+ help -+ Driver for the Sonics Silicon Backplane attached -+ Broadcom Gigabit Ethernet. -+ -+ If unsure, say N -+ - endmenu ---- a/drivers/ssb/Makefile -+++ b/drivers/ssb/Makefile -@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o - ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o - ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o - ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o -+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o - - # b43 pci-ssb-bridge driver - # Not strictly a part of SSB, but kept here for convenience ---- /dev/null -+++ b/drivers/ssb/driver_gige.c -@@ -0,0 +1,294 @@ -+/* -+ * Sonics Silicon Backplane -+ * Broadcom Gigabit Ethernet core driver -+ * -+ * Copyright 2008, Broadcom Corporation -+ * Copyright 2008, Michael Buesch -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+ -+/* -+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver"); -+MODULE_AUTHOR("Michael Buesch"); -+MODULE_LICENSE("GPL"); -+*/ -+ -+static const struct ssb_device_id ssb_gige_tbl[] = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV), -+ SSB_DEVTABLE_END -+}; -+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */ -+ -+ -+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read8(dev->dev, offset); -+} -+ -+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read16(dev->dev, offset); -+} -+ -+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read32(dev->dev, offset); -+} -+ -+static inline void gige_write8(struct ssb_gige *dev, -+ u16 offset, u8 value) -+{ -+ ssb_write8(dev->dev, offset, value); -+} -+ -+static inline void gige_write16(struct ssb_gige *dev, -+ u16 offset, u16 value) -+{ -+ ssb_write16(dev->dev, offset, value); -+} -+ -+static inline void gige_write32(struct ssb_gige *dev, -+ u16 offset, u32 value) -+{ -+ ssb_write32(dev->dev, offset, value); -+} -+ -+static inline -+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read8(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read16(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read32(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+void gige_pcicfg_write8(struct ssb_gige *dev, -+ unsigned int offset, u8 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static inline -+void gige_pcicfg_write16(struct ssb_gige *dev, -+ unsigned int offset, u16 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static inline -+void gige_pcicfg_write32(struct ssb_gige *dev, -+ unsigned int offset, u32 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); -+ unsigned long flags; -+ -+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ if (reg >= 256) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ spin_lock_irqsave(&dev->lock, flags); -+ switch (size) { -+ case 1: -+ *val = gige_pcicfg_read8(dev, reg); -+ break; -+ case 2: -+ *val = gige_pcicfg_read16(dev, reg); -+ break; -+ case 4: -+ *val = gige_pcicfg_read32(dev, reg); -+ break; -+ default: -+ WARN_ON(1); -+ } -+ spin_unlock_irqrestore(&dev->lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); -+ unsigned long flags; -+ -+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ if (reg >= 256) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ spin_lock_irqsave(&dev->lock, flags); -+ switch (size) { -+ case 1: -+ gige_pcicfg_write8(dev, reg, val); -+ break; -+ case 2: -+ gige_pcicfg_write16(dev, reg, val); -+ break; -+ case 4: -+ gige_pcicfg_write32(dev, reg, val); -+ break; -+ default: -+ WARN_ON(1); -+ } -+ spin_unlock_irqrestore(&dev->lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) -+{ -+ struct ssb_gige *dev; -+ u32 base, tmslow, tmshigh; -+ -+ dev = kzalloc(sizeof(*dev), GFP_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ dev->dev = sdev; -+ -+ spin_lock_init(&dev->lock); -+ dev->pci_controller.pci_ops = &dev->pci_ops; -+ dev->pci_controller.io_resource = &dev->io_resource; -+ dev->pci_controller.mem_resource = &dev->mem_resource; -+ dev->pci_controller.io_map_base = 0x800; -+ dev->pci_ops.read = ssb_gige_pci_read_config; -+ dev->pci_ops.write = ssb_gige_pci_write_config; -+ -+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME; -+ dev->io_resource.start = 0x800; -+ dev->io_resource.end = 0x8FF; -+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ if (!ssb_device_is_enabled(sdev)) -+ ssb_device_enable(sdev, 0); -+ -+ /* Setup BAR0. This is a 64k MMIO region. */ -+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1)); -+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base); -+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0); -+ -+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME; -+ dev->mem_resource.start = base; -+ dev->mem_resource.end = base + 0x10000 - 1; -+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ /* Enable the memory region. */ -+ gige_pcicfg_write16(dev, PCI_COMMAND, -+ gige_pcicfg_read16(dev, PCI_COMMAND) -+ | PCI_COMMAND_MEMORY); -+ -+ /* Write flushing is controlled by the Flush Status Control register. -+ * We want to flush every register write with a timeout and we want -+ * to disable the IRQ mask while flushing to avoid concurrency. -+ * Note that automatic write flushing does _not_ work from -+ * an IRQ handler. The driver must flush manually by reading a register. -+ */ -+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068); -+ -+ /* Check if we have an RGMII or GMII PHY-bus. -+ * On RGMII do not bypass the DLLs */ -+ tmslow = ssb_read32(sdev, SSB_TMSLOW); -+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH); -+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) { -+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS; -+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS; -+ dev->has_rgmii = 1; -+ } else { -+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS; -+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS; -+ dev->has_rgmii = 0; -+ } -+ tmslow |= SSB_GIGE_TMSLOW_DLLEN; -+ ssb_write32(sdev, SSB_TMSLOW, tmslow); -+ -+ ssb_set_drvdata(sdev, dev); -+ register_pci_controller(&dev->pci_controller); -+ -+ return 0; -+} -+ -+bool pdev_is_ssb_gige_core(struct pci_dev *pdev) -+{ -+ if (!pdev->resource[0].name) -+ return 0; -+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0); -+} -+EXPORT_SYMBOL(pdev_is_ssb_gige_core); -+ -+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = ssb_get_drvdata(sdev); -+ struct resource *res; -+ -+ if (pdev->bus->ops != &dev->pci_ops) { -+ /* The PCI device is not on this SSB GigE bridge device. */ -+ return -ENODEV; -+ } -+ -+ /* Fixup the PCI resources. */ -+ res = &(pdev->resource[0]); -+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ res->name = dev->mem_resource.name; -+ res->start = dev->mem_resource.start; -+ res->end = dev->mem_resource.end; -+ -+ /* Fixup interrupt lines. */ -+ pdev->irq = ssb_mips_irq(sdev) + 2; -+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq); -+ -+ return 0; -+} -+ -+int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = ssb_get_drvdata(sdev); -+ -+ if (pdev->bus->ops != &dev->pci_ops) { -+ /* The PCI device is not on this SSB GigE bridge device. */ -+ return -ENODEV; -+ } -+ -+ return ssb_mips_irq(sdev) + 2; -+} -+ -+static struct ssb_driver ssb_gige_driver = { -+ .name = "BCM-GigE", -+ .id_table = ssb_gige_tbl, -+ .probe = ssb_gige_probe, -+}; -+ -+int ssb_gige_init(void) -+{ -+ return ssb_driver_register(&ssb_gige_driver); -+} ---- /dev/null -+++ b/include/linux/ssb/ssb_driver_gige.h -@@ -0,0 +1,174 @@ -+#ifndef LINUX_SSB_DRIVER_GIGE_H_ -+#define LINUX_SSB_DRIVER_GIGE_H_ -+ -+#include -+#include -+#include -+ -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ -+ -+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ -+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ -+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ -+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ -+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ -+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ -+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ -+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ -+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ -+ -+/* TM Status High flags */ -+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ -+/* TM Status Low flags */ -+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */ -+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */ -+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */ -+ -+/* Boardflags (low) */ -+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010 -+ -+ -+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory" -+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O" -+ -+struct ssb_gige { -+ struct ssb_device *dev; -+ -+ spinlock_t lock; -+ -+ /* True, if the device has an RGMII bus. -+ * False, if the device has a GMII bus. */ -+ bool has_rgmii; -+ -+ /* The PCI controller device. */ -+ struct pci_controller pci_controller; -+ struct pci_ops pci_ops; -+ struct resource mem_resource; -+ struct resource io_resource; -+}; -+ -+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */ -+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev); -+ -+/* Convert a pci_dev pointer to a ssb_gige pointer. */ -+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) -+{ -+ if (!pdev_is_ssb_gige_core(pdev)) -+ return NULL; -+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops); -+} -+ -+/* Returns whether the PHY is connected by an RGMII bus. */ -+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ return (dev ? dev->has_rgmii : 0); -+} -+ -+/* Returns whether we have a Roboswitch. */ -+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return !!(dev->dev->bus->sprom.boardflags_lo & -+ SSB_GIGE_BFL_ROBOSWITCH); -+ return 0; -+} -+ -+/* Returns whether we can only do one DMA at once. */ -+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return ((dev->dev->bus->chip_id == 0x4785) && -+ (dev->dev->bus->chip_rev < 2)); -+ return 0; -+} -+ -+/* Returns whether we must flush posted writes. */ -+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return (dev->dev->bus->chip_id == 0x4785); -+ return 0; -+} -+ -+extern char * nvram_get(const char *name); -+/* Get the device MAC address */ -+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) -+{ -+#ifdef CONFIG_BCM947XX -+ char *res = nvram_get("et0macaddr"); -+ if (res) -+ memcpy(macaddr, res, 6); -+#endif -+} -+ -+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev); -+extern int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev); -+ -+/* The GigE driver is not a standalone module, because we don't have support -+ * for unregistering the driver. So we could not unload the module anyway. */ -+extern int ssb_gige_init(void); -+static inline void ssb_gige_exit(void) -+{ -+ /* Currently we can not unregister the GigE driver, -+ * because we can not unregister the PCI bridge. */ -+ BUG(); -+} -+ -+ -+#else /* CONFIG_SSB_DRIVER_GIGE */ -+/* Gigabit Ethernet driver disabled */ -+ -+ -+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev) -+{ -+ return -ENOSYS; -+} -+static inline int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev) -+{ -+ return -ENOSYS; -+} -+static inline int ssb_gige_init(void) -+{ -+ return 0; -+} -+static inline void ssb_gige_exit(void) -+{ -+} -+ -+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) -+{ -+ return NULL; -+} -+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) -+{ -+ return 0; -+} -+ -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -60,78 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock); - /* Core to access the external PCI config space. Can only have one. */ - static struct ssb_pcicore *extpci_core; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- --int pcibios_plat_dev_init(struct pci_dev *d) --{ -- struct resource *res; -- int pos, size; -- u32 *base; -- -- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", -- pci_name(d)); -- -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } -- /* Fix up interrupt lines */ -- d->irq = ssb_mips_irq(extpci_core->dev) + 2; -- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -- -- return 0; --} -- --static void __init ssb_fixup_pcibridge(struct pci_dev *dev) --{ -- u8 lat; -- -- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) -- return; -- -- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); -- -- /* Enable PCI bridge bus mastering and memory space */ -- pci_set_master(dev); -- if (pcibios_enable_device(dev, ~0) < 0) { -- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); -- return; -- } -- -- /* Enable PCI bridge BAR1 prefetch and burst */ -- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); -- -- /* Make sure our latency is high enough to handle the devices behind us */ -- lat = 168; -- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -- pci_name(dev), lat); -- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); --} --DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); -- --int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) --{ -- return ssb_mips_irq(extpci_core->dev) + 2; --} -- - static u32 get_cfgspace_addr(struct ssb_pcicore *pc, - unsigned int bus, unsigned int dev, - unsigned int func, unsigned int off) -@@ -320,6 +248,95 @@ static struct pci_controller ssb_pcicore - .mem_offset = 0x24000000, - }; - -+static u32 ssb_pcicore_pcibus_iobase = 0x100; -+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int ssb_pcicore_plat_dev_init(struct pci_dev *d) -+{ -+ struct resource *res; -+ int pos, size; -+ u32 *base; -+ -+ if (d->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", -+ pci_name(d)); -+ -+ /* Fix up resource bases */ -+ for (pos = 0; pos < 6; pos++) { -+ res = &d->resource[pos]; -+ if (res->flags & IORESOURCE_IO) -+ base = &ssb_pcicore_pcibus_iobase; -+ else -+ base = &ssb_pcicore_pcibus_membase; -+ res->flags |= IORESOURCE_PCI_FIXED; -+ if (res->end) { -+ size = res->end - res->start + 1; -+ if (*base & (size - 1)) -+ *base = (*base + size) & ~(size - 1); -+ res->start = *base; -+ res->end = res->start + size - 1; -+ *base += size; -+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -+ } -+ /* Fix up PCI bridge BAR0 only */ -+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -+ break; -+ } -+ /* Fix up interrupt lines */ -+ d->irq = ssb_mips_irq(extpci_core->dev) + 2; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ -+ return 0; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) -+{ -+ u8 lat; -+ -+ if (dev->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ if (pcibios_enable_device(dev, ~0) < 0) { -+ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); -+ return; -+ } -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); -+ -+ /* Make sure our latency is high enough to handle the devices behind us */ -+ lat = 168; -+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -+ pci_name(dev), lat); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); -+ -+/* PCI device IRQ mapping. */ -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (dev->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ return ssb_mips_irq(extpci_core->dev) + 2; -+} -+ - static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) - { - u32 val; ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -10,6 +10,9 @@ - - #include - #include -+#include -+#include -+#include - - #include "ssb_private.h" - -@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu - return res; - } - EXPORT_SYMBOL(ssb_gpio_polarity); -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data) -+{ -+ struct pci_dev *pdev = (struct pci_dev *)data; -+ struct ssb_device *dev; -+ unsigned int i; -+ int res; -+ -+ for (i = 0; i < bus->nr_devices; i++) { -+ dev = &(bus->devices[i]); -+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) -+ continue; -+ if (!dev->dev || -+ !dev->dev->driver || -+ !device_is_registered(dev->dev)) -+ continue; -+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev); -+ if (res >= 0) -+ return res; -+ } -+ -+ return -ENODEV; -+} -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+ -+int ssb_pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ int err; -+ -+ err = ssb_pcicore_plat_dev_init(dev); -+ if (!err) -+ return 0; -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback); -+ if (err >= 0) -+ return err; -+#endif -+ /* This is not a PCI device on any SSB device. */ -+ -+ return -ENODEV; -+} -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data) -+{ -+ const struct pci_dev *pdev = (const struct pci_dev *)data; -+ struct ssb_device *dev; -+ unsigned int i; -+ int res; -+ -+ for (i = 0; i < bus->nr_devices; i++) { -+ dev = &(bus->devices[i]); -+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) -+ continue; -+ if (!dev->dev || -+ !dev->dev->driver || -+ !device_is_registered(dev->dev)) -+ continue; -+ res = ssb_gige_map_irq(dev, pdev); -+ if (res >= 0) -+ return res; -+ } -+ -+ return -ENODEV; -+} -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+ -+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int res; -+ -+ /* Check if this PCI device is a device on a SSB bus or device -+ * and return the IRQ number for it. */ -+ -+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin); -+ if (res >= 0) -+ return res; -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback); -+ if (res >= 0) -+ return res; -+#endif -+ /* This is not a PCI device on any SSB device. */ -+ -+ return -ENODEV; -+} ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -426,5 +426,12 @@ extern int ssb_bus_powerup(struct ssb_bu - extern u32 ssb_admatch_base(u32 adm); - extern u32 ssb_admatch_size(u32 adm); - -+/* PCI device mapping and fixup routines. -+ * Called from the architecture pcibios init code. -+ * These are only available on SSB_EMBEDDED configurations. */ -+#ifdef CONFIG_SSB_EMBEDDED -+int ssb_pcibios_plat_dev_init(struct pci_dev *dev); -+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -+#endif /* CONFIG_SSB_EMBEDDED */ - - #endif /* LINUX_SSB_H_ */ ---- a/include/linux/ssb/ssb_driver_pci.h -+++ b/include/linux/ssb/ssb_driver_pci.h -@@ -1,6 +1,11 @@ - #ifndef LINUX_SSB_PCICORE_H_ - #define LINUX_SSB_PCICORE_H_ - -+#include -+ -+struct pci_dev; -+ -+ - #ifdef CONFIG_SSB_DRIVER_PCICORE - - /* PCI core registers. */ -@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_ - extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, - struct ssb_device *dev); - -+int ssb_pcicore_plat_dev_init(struct pci_dev *d); -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -+ - - #else /* CONFIG_SSB_DRIVER_PCICORE */ - -@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struc - return 0; - } - -+static inline -+int ssb_pcicore_plat_dev_init(struct pci_dev *d) -+{ -+ return -ENODEV; -+} -+static inline -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return -ENODEV; -+} -+ - #endif /* CONFIG_SSB_DRIVER_PCICORE */ - #endif /* LINUX_SSB_PCICORE_H_ */ ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -68,6 +69,25 @@ found: - } - #endif /* CONFIG_SSB_PCIHOST */ - -+int ssb_for_each_bus_call(unsigned long data, -+ int (*func)(struct ssb_bus *bus, unsigned long data)) -+{ -+ struct ssb_bus *bus; -+ int res; -+ -+ ssb_buses_lock(); -+ list_for_each_entry(bus, &buses, list) { -+ res = func(bus, data); -+ if (res >= 0) { -+ ssb_buses_unlock(); -+ return res; -+ } -+ } -+ ssb_buses_unlock(); -+ -+ return -ENODEV; -+} -+ - static struct ssb_device *ssb_device_get(struct ssb_device *dev) - { - if (dev) -@@ -1181,7 +1201,14 @@ static int __init ssb_modinit(void) - err = b43_pci_ssb_bridge_init(); - if (err) { - ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " -- "initialization failed"); -+ "initialization failed\n"); -+ /* don't fail SSB init because of this */ -+ err = 0; -+ } -+ err = ssb_gige_init(); -+ if (err) { -+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " -+ "driver initialization failed\n"); - /* don't fail SSB init because of this */ - err = 0; - } -@@ -1195,6 +1222,7 @@ fs_initcall(ssb_modinit); - - static void __exit ssb_modexit(void) - { -+ ssb_gige_exit(); - b43_pci_ssb_bridge_exit(); - bus_unregister(&ssb_bustype); - } ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty - extern int ssb_devices_freeze(struct ssb_bus *bus); - extern int ssb_devices_thaw(struct ssb_bus *bus); - extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); -+int ssb_for_each_bus_call(unsigned long data, -+ int (*func)(struct ssb_bus *bus, unsigned long data)); - - /* b43_pci_bridge.c */ - #ifdef CONFIG_SSB_B43_PCI_BRIDGE ---- a/drivers/net/tg3.c -+++ b/drivers/net/tg3.c -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -425,8 +426,9 @@ static void _tw32_flush(struct tg3 *tp, - static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) - { - tp->write32_mbox(tp, off, val); -- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && -- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)) -+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) || -+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && -+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))) - tp->read32_mbox(tp, off); - } - -@@ -706,7 +708,7 @@ static void tg3_switch_clocks(struct tg3 - - #define PHY_BUSY_LOOPS 5000 - --static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val) - { - u32 frame_val; - unsigned int loops; -@@ -720,7 +722,7 @@ static int tg3_readphy(struct tg3 *tp, i - - *val = 0x0; - -- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -755,7 +757,12 @@ static int tg3_readphy(struct tg3 *tp, i - return ret; - } - --static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+{ -+ return __tg3_readphy(tp, PHY_ADDR, reg, val); -+} -+ -+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val) - { - u32 frame_val; - unsigned int loops; -@@ -771,7 +778,7 @@ static int tg3_writephy(struct tg3 *tp, - udelay(80); - } - -- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -804,6 +811,11 @@ static int tg3_writephy(struct tg3 *tp, - return ret; - } - -+static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+{ -+ return __tg3_writephy(tp, PHY_ADDR, reg, val); -+} -+ - static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val) - { - tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg); -@@ -2250,6 +2262,14 @@ static int tg3_setup_copper_phy(struct t - } - } - -+ if (tp->tg3_flags & TG3_FLG3_ROBOSWITCH) { -+ current_link_up = 1; -+ current_speed = SPEED_1000; //FIXME -+ current_duplex = DUPLEX_FULL; -+ tp->link_config.active_speed = current_speed; -+ tp->link_config.active_duplex = current_duplex; -+ } -+ - if (current_link_up == 1 && - tp->link_config.active_duplex == DUPLEX_FULL) - tg3_setup_flow_control(tp, lcl_adv, rmt_adv); -@@ -5197,6 +5217,11 @@ static int tg3_poll_fw(struct tg3 *tp) - int i; - u32 val; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { - /* Wait up to 20ms for init done. */ - for (i = 0; i < 200; i++) { -@@ -5435,6 +5460,14 @@ static int tg3_chip_reset(struct tg3 *tp - tw32(0x5000, 0x400); - } - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* BCM4785: In order to avoid repercussions from using potentially -+ * defective internal ROM, stop the Rx RISC CPU, which is not -+ * required. */ -+ tg3_stop_fw(tp); -+ tg3_halt_cpu(tp, RX_CPU_BASE); -+ } -+ - tw32(GRC_MODE, tp->grc_mode); - - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { -@@ -5704,9 +5737,12 @@ static int tg3_halt_cpu(struct tg3 *tp, - return -ENODEV; - } - -- /* Clear firmware's nvram arbitration. */ -- if (tp->tg3_flags & TG3_FLAG_NVRAM) -- tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) { -+ /* Clear firmware's nvram arbitration. */ -+ if (tp->tg3_flags & TG3_FLAG_NVRAM) -+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ } -+ - return 0; - } - -@@ -5787,6 +5823,11 @@ static int tg3_load_5701_a0_firmware_fix - struct fw_info info; - int err, i; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - info.text_base = TG3_FW_TEXT_ADDR; - info.text_len = TG3_FW_TEXT_LEN; - info.text_data = &tg3FwText[0]; -@@ -6345,6 +6386,11 @@ static int tg3_load_tso_firmware(struct - unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size; - int err, i; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) - return 0; - -@@ -7306,6 +7352,11 @@ static void tg3_timer(unsigned long __op - - spin_lock(&tp->lock); - -+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { -+ /* BCM4785: Flush posted writes from GbE to host memory. */ -+ tr32(HOSTCC_MODE); -+ } -+ - if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip -@@ -8906,6 +8957,11 @@ static int tg3_test_nvram(struct tg3 *tp - __le32 *buf; - int i, j, k, err = 0, size; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't have NVRAM. */ -+ return 0; -+ } -+ - if (tg3_nvram_read_swab(tp, 0, &magic) != 0) - return -EIO; - -@@ -9689,7 +9745,7 @@ static int tg3_ioctl(struct net_device * - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); -+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); - spin_unlock_bh(&tp->lock); - - data->val_out = mii_regval; -@@ -9708,7 +9764,7 @@ static int tg3_ioctl(struct net_device * - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); -+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_bh(&tp->lock); - - return err; -@@ -10177,6 +10233,12 @@ static void __devinit tg3_get_5906_nvram - /* Chips other than 5700/5701 use the NVRAM for fetching info. */ - static void __devinit tg3_nvram_init(struct tg3 *tp) - { -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ -+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED); -+ return; -+ } -+ - tw32_f(GRC_EEPROM_ADDR, - (EEPROM_ADDR_FSM_RESET | - (EEPROM_DEFAULT_CLOCK_PERIOD << -@@ -10317,6 +10379,9 @@ static int tg3_nvram_read(struct tg3 *tp - { - int ret; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ return -ENODEV; -+ - if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) - return tg3_nvram_read_using_eeprom(tp, offset, val); - -@@ -10563,6 +10628,9 @@ static int tg3_nvram_write_block(struct - { - int ret; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ return -ENODEV; -+ - if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & - ~GRC_LCLCTRL_GPIO_OUTPUT1); -@@ -11610,7 +11678,6 @@ static int __devinit tg3_get_invariants( - tp->write32 = tg3_write_flush_reg32; - } - -- - if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) || - (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) { - tp->write32_tx_mbox = tg3_write32_tx_mbox; -@@ -11646,6 +11713,11 @@ static int __devinit tg3_get_invariants( - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) - tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; - -+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { -+ tp->write32_tx_mbox = tg3_write_flush_reg32; -+ tp->write32_rx_mbox = tg3_write_flush_reg32; -+ } -+ - /* Get eeprom hw config before calling tg3_set_power_state(). - * In particular, the TG3_FLG2_IS_NIC flag must be - * determined before calling tg3_set_power_state() so that -@@ -12017,6 +12089,10 @@ static int __devinit tg3_get_device_addr - } - - if (!is_valid_ether_addr(&dev->dev_addr[0])) { -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); -+ } -+ if (!is_valid_ether_addr(&dev->dev_addr[0])) { - #ifdef CONFIG_SPARC - if (!tg3_get_default_macaddr_sparc(tp)) - return 0; -@@ -12508,6 +12584,7 @@ static char * __devinit tg3_phy_string(s - case PHY_ID_BCM5704: return "5704"; - case PHY_ID_BCM5705: return "5705"; - case PHY_ID_BCM5750: return "5750"; -+ case PHY_ID_BCM5750_2: return "5750-2"; - case PHY_ID_BCM5752: return "5752"; - case PHY_ID_BCM5714: return "5714"; - case PHY_ID_BCM5780: return "5780"; -@@ -12695,6 +12772,13 @@ static int __devinit tg3_init_one(struct - tp->msg_enable = tg3_debug; - else - tp->msg_enable = TG3_DEF_MSG_ENABLE; -+ if (pdev_is_ssb_gige_core(pdev)) { -+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE; -+ if (ssb_gige_must_flush_posted_writes(pdev)) -+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES; -+ if (ssb_gige_have_roboswitch(pdev)) -+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH; -+ } - - /* The word/byte swap controls here control register access byte - * swapping. DMA data byte swapping is controlled in the GRC_MODE ---- a/drivers/net/tg3.h -+++ b/drivers/net/tg3.h -@@ -2477,6 +2477,9 @@ struct tg3 { - #define TG3_FLG3_ENABLE_APE 0x00000002 - #define TG3_FLG3_5761_5784_AX_FIXES 0x00000004 - #define TG3_FLG3_5701_DMA_BUG 0x00000008 -+#define TG3_FLG3_IS_SSB_CORE 0x00000010 -+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000020 -+#define TG3_FLG3_ROBOSWITCH 0x00000040 - - struct timer_list timer; - u16 timer_counter; -@@ -2532,6 +2535,7 @@ struct tg3 { - #define PHY_ID_BCM5714 0x60008340 - #define PHY_ID_BCM5780 0x60008350 - #define PHY_ID_BCM5755 0xbc050cc0 -+#define PHY_ID_BCM5750_2 0xbc050cd0 - #define PHY_ID_BCM5787 0xbc050ce0 - #define PHY_ID_BCM5756 0xbc050ed0 - #define PHY_ID_BCM5784 0xbc050fa0 -@@ -2568,7 +2572,7 @@ struct tg3 { - (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \ - (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \ - (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \ -- (X) == PHY_ID_BCM8002) -+ (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2) - - struct tg3_hw_stats *hw_stats; - dma_addr_t stats_mapping; ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -212,6 +212,7 @@ void ssb_mipscore_init(struct ssb_mipsco - /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: -+ case SSB_DEV_ETHERNET_GBIT: - case SSB_DEV_80211: - case SSB_DEV_USB20_HOST: - /* These devices get their own IRQ line if available, the rest goes on IRQ0 */ diff --git a/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch b/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch deleted file mode 100644 index b06f08e1cf..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/710-add-gpio-is-valid.patch +++ /dev/null @@ -1,38 +0,0 @@ -Add gpio_is_valid() for bcm47xx ---- a/arch/mips/bcm47xx/gpio.c -+++ b/arch/mips/bcm47xx/gpio.c -@@ -77,3 +77,15 @@ int bcm47xx_gpio_direction_output(unsign - } - EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output); - -+int bcm47xx_gpio_is_valid(int gpio) -+{ -+ if (ssb_bcm47xx.chipco.dev) { -+ if (gpio >= 0 && gpio < BCM47XX_CHIPCO_GPIO_LINES) -+ return 1; -+ } else if (ssb_bcm47xx.extif.dev) { -+ if (gpio >= 0 && gpio < BCM47XX_EXTIF_GPIO_LINES) -+ return 1; -+ } -+ return 0; -+} -+EXPORT_SYMBOL_GPL(bcm47xx_gpio_is_valid); ---- a/include/asm-mips/mach-bcm47xx/gpio.h -+++ b/include/asm-mips/mach-bcm47xx/gpio.h -@@ -17,6 +17,7 @@ extern int bcm47xx_gpio_get_value(unsign - extern void bcm47xx_gpio_set_value(unsigned gpio, int value); - extern int bcm47xx_gpio_direction_input(unsigned gpio); - extern int bcm47xx_gpio_direction_output(unsigned gpio, int value); -+extern int bcm47xx_gpio_is_valid(int gpio); - - static inline int gpio_request(unsigned gpio, const char *label) - { -@@ -52,6 +53,8 @@ static inline int gpio_direction_output( - return bcm47xx_gpio_direction_output(gpio, value); - } - -+#define gpio_is_valid bcm47xx_gpio_is_valid -+ - - /* cansleep wrappers */ - #include diff --git a/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch deleted file mode 100644 index 63a71f05f4..0000000000 --- a/target/linux/brcm47xx/patches-2.6.25/800-fix_cfe_detection.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/arch/mips/bcm47xx/prom.c -+++ b/arch/mips/bcm47xx/prom.c -@@ -32,6 +32,7 @@ - #include - - static int cfe_cons_handle; -+static void (* __prom_putchar)(char c); - - const char *get_system_type(void) - { -@@ -40,65 +41,40 @@ const char *get_system_type(void) - - void prom_putchar(char c) - { -+ if (__prom_putchar) -+ __prom_putchar(c); -+} -+ -+void prom_putchar_cfe(char c) -+{ - while (cfe_write(cfe_cons_handle, &c, 1) == 0) - ; - } - --static __init void prom_init_cfe(void) -+static __init int prom_init_cfe(void) - { - uint32_t cfe_ept; - uint32_t cfe_handle; - uint32_t cfe_eptseal; -- int argc = fw_arg0; -- char **envp = (char **) fw_arg2; -- int *prom_vec = (int *) fw_arg3; -- -- /* -- * Check if a loader was used; if NOT, the 4 arguments are -- * what CFE gives us (handle, 0, EPT and EPTSEAL) -- */ -- if (argc < 0) { -- cfe_handle = (uint32_t)argc; -- cfe_ept = (uint32_t)envp; -- cfe_eptseal = (uint32_t)prom_vec; -- } else { -- if ((int)prom_vec < 0) { -- /* -- * Old loader; all it gives us is the handle, -- * so use the "known" entrypoint and assume -- * the seal. -- */ -- cfe_handle = (uint32_t)prom_vec; -- cfe_ept = 0xBFC00500; -- cfe_eptseal = CFE_EPTSEAL; -- } else { -- /* -- * Newer loaders bundle the handle/ept/eptseal -- * Note: prom_vec is in the loader's useg -- * which is still alive in the TLB. -- */ -- cfe_handle = prom_vec[0]; -- cfe_ept = prom_vec[2]; -- cfe_eptseal = prom_vec[3]; -- } -- } - -- if (cfe_eptseal != CFE_EPTSEAL) { -- /* too early for panic to do any good */ -- printk(KERN_ERR "CFE's entrypoint seal doesn't match."); -- while (1) ; -- } -+ cfe_eptseal = (uint32_t) fw_arg3; -+ cfe_handle = (uint32_t) fw_arg0; -+ cfe_ept = (uint32_t) fw_arg2; -+ -+ if (cfe_eptseal != CFE_EPTSEAL) -+ return -1; - - cfe_init(cfe_handle, cfe_ept); -+ return 0; - } - --static __init void prom_init_console(void) -+static __init void prom_init_console_cfe(void) - { - /* Initialize CFE console */ - cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - } - --static __init void prom_init_cmdline(void) -+static __init void prom_init_cmdline_cfe(void) - { - char buf[CL_SIZE]; - -@@ -146,9 +122,12 @@ static __init void prom_init_mem(void) - - void __init prom_init(void) - { -- prom_init_cfe(); -- prom_init_console(); -- prom_init_cmdline(); -+ if (prom_init_cfe() == 0) { -+ prom_init_console_cfe(); -+ prom_init_cmdline_cfe(); -+ __prom_putchar = prom_putchar_cfe; -+ } -+ - prom_init_mem(); - } - -- cgit v1.2.3