From abc84551c04783c2d59fdd4aa474d5a82ed30cf5 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Sat, 12 Dec 2015 06:42:29 +0000
Subject: ar71xx: add support for Cisco's MR18

This patch adds support for Cisco's MR18.
Detailed instructions for the flashing the device can
be found in the OpenWrt forum thread:
<https://forum.openwrt.org/viewtopic.php?id=59248>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47878
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds |  4 +++
 .../linux/ar71xx/base-files/etc/board.d/02_network |  1 +
 target/linux/ar71xx/base-files/etc/diag.sh         |  3 ++
 .../etc/hotplug.d/firmware/10-ath9k-eeprom         | 32 ++++++++++++++++++++++
 4 files changed, 40 insertions(+)

(limited to 'target/linux/ar71xx/base-files/etc')

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 33f83776a4..d4f226e085 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -283,6 +283,10 @@ mr16)
 	ucidef_set_led_wlan "wlan4" "WLAN4" "mr16:green:wifi4" "phy0tpt"
 	;;
 
+mr18)
+	ucidef_set_led_netdev "wlan0" "WLAN0" "mr18:blue:tricolor0" "wlan0"
+	;;
+
 mr600)
 	ucidef_set_led_wlan "wlan58" "WLAN58" "mr600:green:wlan58" "phy0tpt"
 	;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0e77e933c3..11c4341557 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -313,6 +313,7 @@ eap7660d |\
 el-mini |\
 loco-m-xw |\
 mr1750 |\
+mr18 |\
 mr600 |\
 mr600v2 |\
 mr900 |\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 5b997e08df..0e1df108f0 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -152,6 +152,9 @@ get_status_led() {
 	mr16)
 		status_led="mr16:green:power"
 		;;
+	mr18)
+		status_led="mr18:green:tricolor0"
+		;;
 	mr600)
 		status_led="mr600:orange:power"
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b5f0588863..5398e76105 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -38,6 +38,14 @@ board=$(ar71xx_board_name)
 case "$FIRMWARE" in
 "soc_wmac.eeprom")
 	case $board in
+	mr18)
+		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+			ath9k_ubi_eeprom_extract "caldata" 4096 2048
+		else
+			ath9k_eeprom_extract "odm-caldata" 4096 2048
+		fi
+		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +1)
+		;;
 	r6100 | \
 	wndr3700v4 | \
 	wndr4300)
@@ -52,6 +60,14 @@ case "$FIRMWARE" in
 
 "pci_wmac0.eeprom")
 	case $board in
+	mr18)
+		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+			ath9k_ubi_eeprom_extract "caldata" 20480 2048
+		else
+			ath9k_eeprom_extract "odm-caldata" 20480 2048
+		fi
+		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +2)
+		;;
 	wndr3700v4 | \
 	wndr4300)
 		ath9k_eeprom_extract "caldata" 20480 2048
@@ -62,4 +78,20 @@ case "$FIRMWARE" in
 		;;
 	esac
 	;;
+
+"pci_wmac1.eeprom")
+	case $board in
+	mr18)
+		if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
+			ath9k_ubi_eeprom_extract "caldata" 36864 2048
+		else
+			ath9k_eeprom_extract "odm-caldata" 36864 2048
+		fi
+		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +3)
+		;;
+	*)
+		ath9k_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
 esac
-- 
cgit v1.2.3