From 82c5e2c497c69dca32a59090cddf5f298aa94e01 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Jan 2016 15:03:48 +0000 Subject: mac80211: update to wireless-testing 2016-01-10 Signed-off-by: Felix Fietkau SVN-Revision: 48247 --- ...k-fix-data-bus-error-on-ar9300-and-ar9580.patch | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch (limited to 'package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch') diff --git a/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch new file mode 100644 index 0000000000..d4088664bf --- /dev/null +++ b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch @@ -0,0 +1,65 @@ +From: Miaoqing Pan +Date: Fri, 15 Jan 2016 18:17:21 +0800 +Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580 + +One crash issue be found on ar9300: RTC_RC reg read leads crash, leading +the data bus error, due to RTC_RC reg write not happen properly. + +Warm Reset trigger in continuous beacon stuck for one of the customer for +other chip, noticed the MAC was stuck in RTC reset. After analysis noticed +DMA did not complete when RTC was put in reset. + +So, before resetting the MAC need to make sure there are no pending DMA +transactions because this reset does not reset all parts of the chip. + +The 12th and 11th bit of MAC _DMA_CFG register used to do that. + 12 cfg_halt_ack 0x0 + 0 DMA has not yet halted + 1 DMA has halted + 11 cfg_halt_req 0x0 + 0 DMA logic operates normally + 1 Request DMA logic to stop so software can reset the MAC + +The Bit [12] of this register indicates when the halt has taken effect or +not. the DMA halt IS NOT recoverable; once software sets bit [11] to +request a DMA halt, software must wait for bit [12] to be set and reset +the MAC. + +So, the same thing we implemented for ar9580 chip. + +Signed-off-by: Miaoqing Pan +--- + +--- a/drivers/net/wireless/ath/ath9k/hw.c ++++ b/drivers/net/wireless/ath/ath9k/hw.c +@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at + if (ath9k_hw_mci_is_enabled(ah)) + ar9003_mci_check_gpm_offset(ah); + ++ /* DMA HALT added to resolve ar9300 and ar9580 bus error during ++ * RTC_RC reg read ++ */ ++ if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) { ++ REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); ++ ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK, ++ 20 * AH_WAIT_TIMEOUT); ++ REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); ++ } ++ + REG_WRITE(ah, AR_RTC_RC, rst_flags); + + REGWRITE_BUFFER_FLUSH(ah); +--- a/drivers/net/wireless/ath/ath9k/reg.h ++++ b/drivers/net/wireless/ath/ath9k/reg.h +@@ -34,8 +34,10 @@ + #define AR_CFG_SWRG 0x00000010 + #define AR_CFG_AP_ADHOC_INDICATION 0x00000020 + #define AR_CFG_PHOK 0x00000100 +-#define AR_CFG_CLK_GATE_DIS 0x00000400 + #define AR_CFG_EEBS 0x00000200 ++#define AR_CFG_CLK_GATE_DIS 0x00000400 ++#define AR_CFG_HALT_REQ 0x00000800 ++#define AR_CFG_HALT_ACK 0x00001000 + #define AR_CFG_PCI_MASTER_REQ_Q_THRESH 0x00060000 + #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17 + -- cgit v1.2.3