From b30e092de65ca7be7cb277f934016484137d924c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 6 Jul 2015 16:26:34 +0000 Subject: mac80211: update to version 2015-06-22 Signed-off-by: Felix Fietkau SVN-Revision: 46198 --- ...h10k-Delay-device-access-after-cold-reset.patch | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 package/kernel/mac80211/patches/307-ath10k-Delay-device-access-after-cold-reset.patch (limited to 'package/kernel/mac80211/patches/307-ath10k-Delay-device-access-after-cold-reset.patch') diff --git a/package/kernel/mac80211/patches/307-ath10k-Delay-device-access-after-cold-reset.patch b/package/kernel/mac80211/patches/307-ath10k-Delay-device-access-after-cold-reset.patch new file mode 100644 index 0000000000..51998c2641 --- /dev/null +++ b/package/kernel/mac80211/patches/307-ath10k-Delay-device-access-after-cold-reset.patch @@ -0,0 +1,56 @@ +From: Vasanthakumar Thiagarajan +Date: Fri, 3 Jul 2015 11:45:42 +0530 +Subject: [PATCH] ath10k: Delay device access after cold reset + +It is observed that during cold reset pcie access right +after a write operation to SOC_GLOBAL_RESET_ADDRESS causes +Data Bus Error and system hard lockup. The reason +for bus error is that pcie needs some time to get +back to stable state for any transaction during cold reset. Add +delay of 20 msecs after write of SOC_GLOBAL_RESET_ADDRESS +to fix this issue. + +Signed-off-by: Vasanthakumar Thiagarajan +--- + +--- a/drivers/net/wireless/ath/ath10k/pci.c ++++ b/drivers/net/wireless/ath/ath10k/pci.c +@@ -2602,7 +2602,6 @@ static int ath10k_pci_wait_for_target_in + + static int ath10k_pci_cold_reset(struct ath10k *ar) + { +- int i; + u32 val; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n"); +@@ -2618,23 +2617,18 @@ static int ath10k_pci_cold_reset(struct + val |= 1; + ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); + +- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { +- if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & +- RTC_STATE_COLD_RESET_MASK) +- break; +- msleep(1); +- } ++ /* After writing into SOC_GLOBAL_RESET to put device into ++ * reset and pulling out of reset pcie may not be stable ++ * for any immediate pcie register access and cause bus error, ++ * add delay before any pcie access request to fix this issue. ++ */ ++ msleep(20); + + /* Pull Target, including PCIe, out of RESET. */ + val &= ~1; + ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); + +- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { +- if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & +- RTC_STATE_COLD_RESET_MASK)) +- break; +- msleep(1); +- } ++ msleep(20); + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n"); + -- cgit v1.2.3