summaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: this ARM SoC does not have a FPU, use soft float.Hauke Mehrtens2013-11-131-1/+1
| | | | | | | | | model name : ARMv7 Processor rev 0 (v7l) Features : swp half thumb fastmult edsp tls Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38796
* brcm47xx: swap also early boot console if necessary.Hauke Mehrtens2013-11-132-2/+49
| | | | | | | | | | | Some devices are using tty1 as the default console, also swap the early boot console in such case. This is needed for the WGT634U. Thank you Russell for reporting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38794
* kernel: b53: fix untagged shift for BCM5365Hauke Mehrtens2013-11-132-4/+8
| | | | | | | | | | | The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38793
* ramips: select kmod-rt2800-soc by default (if available)Felix Fietkau2013-11-131-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38784
* mxs: - update uboot-mxs to 3.10 - enable building uboot for imx23 along ↵Zoltan Herpai2013-11-121-3/+4
| | | | | | | | sbImage by default - (doc updated) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38781
* mxs: bump kernel to 3.12 - remove DCP patch as it's in mainline now (dts ↵Zoltan Herpai2013-11-125-1004/+48
| | | | | | | | patch will stay) - refresh Duckbill patch - update kmod-usb-chipidea Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38780
* mxs: add basic board runtime detection supportZoltan Herpai2013-11-124-0/+109
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38777
* mxs: duckbill: adjust leds to final hardwareZoltan Herpai2013-11-121-4/+4
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 38775
* mxs: rename uboot-imx23 to uboot-mxsZoltan Herpai2013-11-121-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38774
* mxs: fix loadaddr for uImagesZoltan Herpai2013-11-121-1/+1
| | | | | | Signed-off-by: Harald Geyer <harald@ccbib.org> SVN-Revision: 38773
* brcm47xx: fix netconfig for inverted vlan?ports in nvramHauke Mehrtens2013-11-111-2/+4
| | | | | | This was observed on the Belkin Share F7D7302. SVN-Revision: 38769
* linux/brcm47xx : Belkin F7Dx30x board detectionHauke Mehrtens2013-11-111-0/+33
| | | | | | | | | | | | | | | boardnum is unstable, so allow using NULL to make it unchecked. A method for differentiating F7D3301 from F7D3302 using nvram is unknown at this point. Reading the first 32bits of magic from the "linux" mtd partition would do the trick, but these 2 are similar enough that we don't need separate led/button definitions. Not knowing which one you have is only a usability issue for upgrading the device: they expect different magic numbers for their trx images. Signed-off-by: Cody P Schafer <devel@codyps.com> SVN-Revision: 38767
* brcm47xx: b44: fix logic in BUG_ON()Hauke Mehrtens2013-11-111-1/+1
| | | | | | | | It is a problem when phydev is not set at this position and not the other way around. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38744
* ixp4xx: fix usb on cambria boards by using the ehci-platform driverFelix Fietkau2013-11-111-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38740
* ramips: use gpio-button-hotplug in favour of the input variantJohn Crispin2013-11-111-2/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38735
* ramips: make the rfkill switch work on fonera20nJohn Crispin2013-11-111-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38734
* lantiq: DGN3500 fixupsJohn Crispin2013-11-112-1/+3
| | | | | | | | Just fixing up a few things for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 38733
* lantiq: rename TDW8970 led adsl->dslJohn Crispin2013-11-111-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38730
* lantiq: update TDW8970.dts to support buttons properlyJohn Crispin2013-11-111-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38728
* lantiq: remove old hotplug handlerJohn Crispin2013-11-111-53/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38727
* add missing option, enable hw rngImre Kaloz2013-11-111-0/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38722
* ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boardsGabor Juhos2013-11-111-1/+1
| | | | | | | Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38720
* ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderGabor Juhos2013-11-112-0/+25
| | | | | | | | | Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38719
* ar71xx: add user space support for the TL-WA750RE/WA850RE Range extenderGabor Juhos2013-11-115-0/+32
| | | | | | | | | Patch to add user space support for the TL-WA750RE/WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38718
* ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extenderGabor Juhos2013-11-113-0/+224
| | | | | | | | | | | Patch to add kernel support for the TP-LINK WA750RE and the WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38717
* ar71xx: ag71xx: fix ag71xx_probe error pathGabor Juhos2013-11-111-1/+3
| | | | | | | Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38716
* bcm53xx: make bgmac workHauke Mehrtens2013-11-114-3/+42
| | | | | | | | This makes bgmac work without sprom and refreshed the patches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38715
* kernel: bgmac: make it send and receive some packages on BCM4708Hauke Mehrtens2013-11-118-4/+520
| | | | | | | | | | This adds some more code for bgmac core rev 4 and it now restarts all cores when initializing the first one on BCM4708. I am just able to send under 100 packages and then DMA TX does not work any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38714
* kernel: bcma: detect pci ID 0x4313Hauke Mehrtens2013-11-112-1/+46
| | | | | | | | | | | This pci ID is used by sprom less BCM4313 devices. This is a backport from the mainline kernel. This is part of #13551. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38713
* kernel: b53: add initial support for switches in BCM5301XHauke Mehrtens2013-11-102-3/+87
| | | | | | | | This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38712
* add uImage image buildImre Kaloz2013-11-101-26/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add building of a standard uImage along with the combined kernel+rootfs - remove 'old' image build - that was for a very old and obsolete bootloader To update the bootloader for GW2387,GW2388,GW2391 (NOR Flash) from uboot: put latest NOR bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_nor.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-nor.bin Laguna> erase 0x10000000 +$(filesize) Laguna> cp.b 0x800000 0x10000000 $(filesize) Laguna> reset To update the bootloader for GW2380,GW2382,GW2383 (SPI Flash) from uboot: put latest SPI bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_spi.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-spi.bin Laguna> erase 0x60000000 +$(filesize) Laguna> cp.b 0x800000 0x60000000 $(filesize) Laguna> reset Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38703
* add pushbutton GPIO for GW2380/82/83Imre Kaloz2013-11-101-0/+3
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38702
* brcm47xx: add detection for Linksys WRT54GS V1Hauke Mehrtens2013-11-091-1/+12
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38700
* brcm47xx: register ADM6996L switchHauke Mehrtens2013-11-093-3/+127
| | | | | | | | | | | | This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38699
* kernel: adm6996: add support for ADM6996L and GPIO interfaceHauke Mehrtens2013-11-093-127/+497
| | | | | | | | | | | | | | | | | This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38698
* switch to 3.12, enable support for AM33xx/OMAP3Imre Kaloz2013-11-086-121/+82731
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38692
* rename the omap4 target to omapImre Kaloz2013-11-086-6/+6
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38691
* ar71xx: ag71xx: fix a race involving netdev registrationGabor Juhos2013-11-082-23/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, phy_connect before register_netdev. This is because register_netdev runs the netdev notifiers, which can race with the rest of the initialization in ag71xx_probe. In my case this manifested in two ways: 1) If ag71xx is compiled as a module and inserted after netifd has started, netifd is notified by register_netdev before the call to ag71xx_phy_connect. netifd tries to bring the interface up, which calls ag71xx_open, which in turn enters ag71xx_phy_start. This keys off ag->phy_dev (which is still NULL) and thinks this is a fixed-link board, and enters ag71xx_link_adjust. This looks at ag->speed which is not yet initialized and hits the BUG() in the switch (ag->speed) in ag71xx_link_adjust. This is the wrong code path for ag71xx_phy_start - my board has PHYs that need to be brought up with phy_start. Doing ag71xx_phy_connect before register_netdev ensures that ag->phy_dev is non-NULL before ag71xx_phy_start is ever called. 2) When ag71xx is built into the kernel, and netconsole is enabled, there is a gap in the initial burst of replayed printks right after the netdev comes up. My assumption is that netconsole is also triggered by a netdev notifier, and part of this printk burst happens before the call into ag71xx_phy_connect, so part of the burst is lost while the PHY comes up. This patch fixes the gap - all the printks before eth0 comes up are bursted in full when netconsole initializes. ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the logging has been adjusted accordingly to avoid "unregistered net_device" or "eth%d" messages in dmesg. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38689
* ar71xx: build image for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-072-1/+24
| | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38688
* ar71xx: add user-space support for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-075-4/+23
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38687
* ar71xx: add kernel support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-073-0/+215
| | | | | | | | | | | | | This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38686
* ar71xx: image: add EOF marker to the WNDR4300 UBI imageGabor Juhos2013-11-071-9/+6
| | | | | | | | | | | | | | | Append EOF markers to the END of the UBI image file. This forces the kernel to erase all blocks after the marker even if those blocks are not empty. Additionally, the resulting image can be flashed from the original web UI now, so use '-factory' suffix for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38683
* kernel/3.10: add EOF marker support to the UBI layerGabor Juhos2013-11-071-0/+51
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38681
* lantiq: fix TDW8970 lan/wan macJohn Crispin2013-11-071-1/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38677
* au1000: make sysupgrade compatible with all file system typesJohn Crispin2013-11-072-2/+4
| | | | | | | | | | | | | | This patch adds support for all file system types as discussed earlier: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022109.html This patch depends on a previous patch: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022111.html Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> SVN-Revision: 38675
* au1000: create sysupgrade binary for each file system typeJohn Crispin2013-11-071-1/+1
| | | | | | | | | | | | | This patch should prevent overriding of sysupgrade binaries in the bin directory if we build images for more then one file system type. Discussion: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022108.html Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> SVN-Revision: 38674
* lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devicesJohn Crispin2013-11-071-2/+3
| | | | | | | | | | | The switch is renamed to "switch0" in newer (3.10) linux kernels. Configure the switch using vlans by default and only configure the physical switch ports that are present. Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38673
* ralink: revert 38348 as it breaks network on the hame-mprJohn Crispin2013-11-071-2/+0
| | | | | | | | | https://dev.openwrt.org/changeset/38348 https://dev.openwrt.org/ticket/14403#comment:1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38669
* ralink: fix c&p error in gpio driverJohn Crispin2013-11-071-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38668
* lantiq: fix td-w8970 initramfs generationJohn Crispin2013-11-071-3/+2
| | | | | | | | https://dev.openwrt.org/ticket/14417 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38667
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 00:00:34 +0000